| TITLE |
AUTHOR |
| The Relationship Between the Boundary Area and Hardness of Recrystallized Cartridge Brass |
W. J. Babyak and F. N. Rhines |
| The Morphology of Brittle Fracture in Pearlite, Bainite and Martensite |
A. M. Turkalo |
| The Solubility of Copper in Ferrite |
H. A. Wriedt and L. S. Darken |
| Prediction of Elastic Constants of Multiphase Materials |
B. Paul
|
| Vapor Pressure and Thermodynamic Properties of Zn-Zr and Zn-U Alloys |
P. Chiotti and G. R. Kilp |
| An Acoustical Study of Low-Temperature Age-Hardening after Reversion in Al-6 At. Pct Ag |
Herbert Herman and M. E. Fine |
| Effect of Solute Impurities on Preferred Orientation in Annealed High-Purity Lead |
J. W. Rutter and K. T. Aust |
| Directional Freezing of Magnesium Alloys |
A. S. Yue and J. B. Clark |
| Some Devices for Quantitative Metallography |
C. S. Smith |
| Activity of Carbon in Iron-Nickel Alloys at 1000°C |
R. P. Smith |
| A Texture Study in Silicon Iron |
P. K. Koh and C. G. Dunn |
| Annealing of Point Defects in Cold-Worked Tungsten and the Influence of Impurities on the Kinetics |
L. A. Neimark and R. A. Swalin |
| Composition-Temperature Behavior of the Martensitic Transformation in Beta AgCd |
D. B. Masson |
| Effect of Grain Growth on the Formation of the Cube Texture in an Al-Mn Alloy |
T. J. Koppenaal, M. N. Pathasarathi and P. A. Beck |
| The Effect of Zirconium on the Properties of Extruded Magnesium-Rare Earth Metal Alloys |
J. F. Pashak and T. E. Leontis |
| The Relationship of Structure to Mechanical Properties in Udimet 500 |
M. Kaufman and A. E. Palty |
| Some Properties and Metallography of Steel-Bonded Titanium Carbide |
Martin Epner and Eric Gregory |
| Measurement of Deformation Resulting from Grain Boundary Sliding in Aluminum and Aluminum-Magnesium from 410° F to 940°F |
Hans Brunner and N. J. Grant |
| Habit Plane of Hydride Precipitation in Zirconium and Zirconium-Uranium |
F. W. Kunz and A. E. Bibb |
| Deformation Textures in Aluminum-Uranium Alloys |
W. C. Thurber and C. J. McHargue |
| Theory of Deformation in Superlattices |
P. A. Flinn |
| The Effects of Cold Work on the Alloy Cu3Au |
J. B. Coher and M. B. Bever |
| Influence of Crystallographic Order On Creep of Iron-Aluminum Solid Solutions |
A. Lawley, J. A. Coll and R. W. Cahn |
| The Effect of Grain Boundary Migration on the Formation of Intercrystalline Voids During Creep |
C. W. Chen and E. S. Machlin |
| The Growth of Ni3 (Al, Ti) Precipitates in a Ni-Cr-Ti- Al Alloy |
N. E. Rogen and N. J. Grant |
| Ductile Beryllium-Silver Alloys Produced by Castings (TN) |
J. B. Cohen |
| A Solidus Measurement Technique for the Tantalum-Rhenium System to 3000° C (TN) |
J. H. Brophy and P. Schwarzkopf |
| Some Aspects of Martensitic Transformation in Copper Aluminum Alloys (TN) |
Rajendra Kumar and V. Balasubarmanian |
| A Substructure in Omega-Hardened Alloys of Colbalt in Titanium (TN) |
G. R. Purdy and R. Taggart |
| The Germanium-Tellurium Phase Diagram in the Vicinity of the Compound GeTe (TN) |
J. P. McHugh and W. A. Tiller |
| Effect of Orientation of Creep of Aluminum Single Crystals at 4.2°K (TN) |
R. L. Fleischer and W. A. Backofen |
| A New Method to Test Steel for Temper Brittleness (TN) |
Abdul-Fattah K. Kaddou and P. C. Rosenthal |
| The Crystallography of the Austenite-Martensite Transformation, The {111} Shear Solutions |
M. S. Wechsler, T. A. Read and D. S. Lieberman |
| Creep of Indium, Lead, and Some of Their Alloys with Various Metals |
J. Weertman |
| The Composition Range of Ti2Co |
G. R. Purdy and J. G. Parr |
| Determining Boron Distribution in metals by Neutron Activation |
Barbara A. Thompson |
| Solid Solution and Second Phase Strengthening of Nickels Alloy at High Temperature |
Regis M. N. Pelloux and N. J. Grant |
| Beta Decomposition in Zr-U-O Alloys |
D. L. Douglas |
| Effects of Grain Boundaries in Tensile Deformation at Low Temperatures |
R. L. Fleischer and W. A. Backofen |
| Plastic Deformation of Germanium by Alloying |
W. J. Feuerstein |
| Effect of Carbide Dispersion in Molybdenum Alloys |
W. H. Chang |
| Deformation Mechanisms and Work Hardening in Rhenium |
A. T. Churchman |
| Magnetic Anisotropy and Magnetostriction of Ordered and Disordered Cobalt-Iron Alloys |
R. C. Hall |
| Effects of Radiation-Generated Helium and Tritium on the Properties of Aluminum-Lithium Alloys |
D. W. Lillie |
| The Mechanism of Beneficial Effects of Boron and Zirconium on Creep Properties of a Complex Heat-Resistant Alloy |
R. F. Decker and J. W. Freeman |
| Permeability and Diffusion of Hydrogen Through Palladium |
M. van Swaay and C. E. Birchenall |
| Stress Induced Strain Aging |
J. O. Brittain and S. E. Bronisz |
| Preliminary Internal Friction Measurements in Chromium |
M. E. de Morton |
| Further Studies of GPI Zone Formation in Al-2 At. Pct Cu |
C. Chiou, H. Herman and M. E. Fine |
| The Self-Diffusion of Columbium |
R. Resnick and L. S. Castleman |
| Carbide Precipitation and Evolution and Depletion of Matrix in Heat Resisting Steels and Alloys Treated in Carburizing Atmospheres |
G. Pomey |
| Stabilization of Certain Ti2Ni-Type Phases by Oxygen |
M. V. Nevitt |
| Transformation Mechanisms in a Hypereutectoid Titanium-Chromium Alloy |
H. I. Aaronson, W. B. Triplett and G. M. Andes |
| An X-Ray Reflection Micrographic Method for Measuring Subgrain Boundary Angle |
R. J. Towner and J. A. Berger |
| On the Imperfections in Martensite and their Relation to the Formation of Martensite |
H. M. Otte |
| Critical Recrystallization of Zirconium |
J. C. Bokros |
| Grain Boundary Grooving by Volume Diffusion |
W. W. Mullins |
| A New Metallographic Technique for Magnesium Alloys (TN) |
R. T. Pepper |
| Growth of Large Single Crystals of High-Purity Aluminum by Strain-Annealing (TN) |
J. M. Lommel |
| The Solubility of Tin in Solid Lead (TN) |
J. W. Cahn and H. N. Treaftis |
| Some Properties of Vanadium at Subatmospheric Temperatures (TN) |
J. A. Hren and C. M. Wayman |
| Production of High-Purity Aluminum Crystals by a Modified Strain-Anneal Method (TN) |
H. P. Leighly, Jr., and F. C. Perkins |
| Mechanical Twinning in the AuCd ß' Phase (TN) |
H. K. Birnbaum and T. A. Read |
| The Solubility Limits of PbTe (TN) |
Edward Miller, Kurt Komarek and Irving Cadoff |
| Surface Aging of Titanium Alloys (TN) |
F. C. Holden and R. D. Buchheit |
| Kinetics of Nickel Corrosion in Sulfuric Acid |
C. H. Pitt and M. E. Wadsworth |
| A Study of Grain Shape in Cemented Titanium Carbides |
T. J. Whalen and Michael Humenik. Jr. |
| The Solubility of Carbon in Alpha-Fe as Determined by the Time Decay of Permeability; |
Joseph Singer and E. S. Anolick |
| Comparative Experiments in Drawing. Rolling, and Extruding of Bars Through a Pair of Cylindrical Rollers |
N. H. Polakowski and L. B Schmitt |
| Mechanical Properties of Magnesium Monocrystals |
W. F. Sheely and R. R. Nash |
| High Conductivity Copper-Rich Cu-Zr Alloys |
M. J. Saarivirta |
| An Extruded Chromium-Alumina Alloy |
A. Gatti |
| Diffusion Studies in the Uranium-Niobium (Columbium) System |
N. L. Peterson and R. E. Ogilvie |
| Plastic Deformation of Aluminum Multicrystals |
C. Elbaum |
| Nature of the Matrix for Secondary Recrystallization to the Cube Texture in High-Purity Silicon Iron |
C. G. Dunn and J. L. Walter |
| Microstrain in Zinc Single Crystals |
J. M. Roberts and N. Brown |
| Self-Diffusion in Tin Single Crystals |
J. D. Meakin and E Klokholm |
| Precipitation Processes in Mg-Th-Zr Alloys |
L. Sturkey |
| Effect of Manganese on the Austenite-Pearlite Transformation |
M. L. Picklesimer, D. L. McElroy, T. M. Kegley, Jr., E. E. Stansbury and J. H. Frye. Jr. |
| The Observation of Fatigue Processes in MgO Single Crystals |
I. Cornet and A. E. Gorum |
| Anelastic Measurements of Atomic Mobility in Body-Centered Cubic Li-Mg Solid Solution |
D. P. Seraphim |
| Deformation and Fracture of Magnesium Bicrystals |
J. D. Mote and J. E. Dorn |
| The Tensile Fracture of Ductile Metals |
H. C. Rogers |
| Phase Transformations in Nickel-Rich Nickel-Titanium-Aluminum Alloys |
J. R. Mihalisin and R. F. Decker |
| Observations on the Thermal Etching of Silicon Iron |
D. S. Hutton and W. C. Leslie |
| A Liquid Phase Coating for Molybdenum |
G. D. Oxx, Jr., and L. F. Coffin, Jr. |
| Use of Axis Distribution Charts to Represent Sheet Textures |
C. J. McHargue and L. K. Jetter |
| A study of the {1011} and {1013} Twinning Modes in Magnesium |
R. E. Reed-Hill |
| Room-Temperature Recovery of Internal Friction and Elastic Constants in Freshly Quenched Steels |
C. E. Beaulieu, A. Dubé and G. Letendre |
| On the Widmansfatten Habit Plane of Proeutectoid Cementite |
R. W. Heckel, J. H. Smith and H. W. Paxton |
| Possible Coexisting Order and Disorder in Fe3Al (TN) |
A. U. Seybolt |
| Nitrides of Iron with Nickel, Palladium, and Platinum (TN) |
H. H. Stadelmaier and A. C. Fraker |
| Oxidation of Tin (TN) |
Charles Luner |
| An Etch Pit Method for Revealing Dislocation Sites in Nickel (TN) |
R. W. Guard |
| Formation of a Dispersion in Copper by Reaction in the Melt (TN) |
D. N. Williams, J. W. Roberts and R. I. Jaffee |
| The Precipitation of Carbon from Alpha-Iron I. Electromicroscopic Study |
R. H. Doremus and E. F. Koch |
| The Precipitation of Carbon from Alpha-Iron II Kinetics |
R. H. Doremus |
| Self-Diffusion in Gamma Uranium |
S. J. Rothman, L. T. Lloyd and A. L. Harkness |
| Preparation and Properties of High Purity Scandium Metal |
F. H. Spedding, A. H. Daane, G. Wakefield and D. H. Dennison |
| X-Ray Studies of Polygonization and Subgrain Growth in Aluminum |
R. J. Towner and J. A. Berger |
| Effect of Si and Al on the Stability of Certainsigma Phases |
K. P. Gupta, N. S. Rajan and P. A. Beck |
| Quantitative Addition and Recovery of Oxygen Isotopes in Niobium (Columbium) |
W. F. Harris, W. M. Hickam, M. H. Loeffler and D. H. Shaffer |
| Inverse Segregation in Aluminum-Zinc Ingots |
W. V. Youdelis and D. R. Colton |
| A Mutual Solid Solubility Scale for Metals |
Y. L. Yao |
| Observation of Slip, Twinning, and Cleavage in Iron-Phosphorus Solid Solutions |
E. Hornbogen |
| The Gamma to Epsilon Transformation in Zr 20 to 70 Wt Pct U Alloys |
A. A. Bauer |
| Deformation Behavior of Zone -Melted Tungsten Single Crystals |
H. W. Schadler |
| Environmental Effects on the Mechanical Properties of Ionic Solids with Particular Reference to the Joffe Effect |
R. J. Stokes, T. L. Johnston and C. H. Li |
| Stress Induced Twin Boundary Motion in AuCd ß' and ß" Alloys |
H. K. Birnbaum and T. A. Read |
| Co-Rich Intermediate Phases in the Cb-Co System |
Shozo Saito and P. A. Beck |
| The Oxidation of Iron in Carbon Dioxide-Carbon Monoxide Atmospheres |
W. W. Smeltzer |
| Kinetics of Grain Boundary Migration in High-Purity Lead Containing Very Small Additions of Silver and Gold |
J. W. Rutter and K. T. Aust |
| The Evolution of Textures in FCC Metals: Part I. Alloys of Copper with Germanium and Tin |
Y. C. Liu and R. H. Richman |
| Effect of Heat Treatment in the Ferrite-Austenite Region on Notch Toughness of Low Carbon Steels |
W. C. Leslie, R. L. Rickett and W. D. Lafferty |
| Growth of Chromium Coatings from Liquid Metallic Solutions |
S. T. Wlodek and John Wulff |
| Constitution of Fe C Mo Alloys Containing 0.05 - 1.3 pct C and 0.03 - 6.0 pct Mo |
R. F. Campbell, S. H. Reynolds. L. W. Ballard and K. G. Carroll |
| Relationship Between the Mu Phase and the Sigma Phase in the Mo-Mn-Co System |
B. N. Das and P. A. Beck |
| Dislocations in Deformed Single Crystals of Alpha Brass. Part I: General Observations |
J. D. Meakin and H. G. F. Wilsdorf |
| Dislocation in Deformed Single Crystals of Alpha Brass. Part II: Pileups |
J. D. Meakin and H. G. F. Wilsdorf |
| The Isothermal Transformation of Eutectoid Beryllium Bronze at High Temperatures |
J. S. Brett, G. L. Kehl and Emilo Jaraiz F. |
| Intermediate Phases with the Cu5Ca Structure (TN) |
S. E. Hasko |
| Dislocation Etch Pits in High-Purity Cadmium (TN) |
J. H. Wernick and E. E. Thomas |
| Fabrication of Thulium Foil (TN) |
H. H. Klepfer and M. E. Snyder |
| Grain Boundary Sliding Versus Grain Boundary Migration in Creep (TN) |
N. R. Adsit and J. O. Brittain |
| Self-Diffusion of Iron in Nickel Ferrite (TN) |
R. H. Condit, M. J. Brabers and C. E. Birchenall |
| The Behavior of Composite Silver-Alumina Alloys above the Melting Point of Silver |
H. R. Peiffer |
| Effect of Stress Upon the Recovery and Effect of Negative Strain Upon the Yield Point of Zinc Single Crystals |
J. V. Rinnovatore and Norman Brown |
| High-Temperature Short-Time Creep of Graphite. H E Martens |
L. D. Jaffee and D. D. Button |
| Dispersion-Hardening in Binary Titanium-Copper Alloys |
D. N. Williams, R. A. Wood, H. R. Ogden and R. I. Jaffee |
| High-Temperature Slip in Tungsten |
Sam Leber and J. W. Pugh |
| Measurement of Kirkendall Effect in the Iron-Chromium System |
H. W. Paxton and E. J. Pasierb |
| The Deformation of Unalloyed Titanium Sheet as Function of Orientation and Strain Rate |
C. P. Gazzara and E. P.Klier |
| Rates of Growth of Cementite in Hypereutectoid Steels |
R. W. Heckel and H. W. Paxton |
| Identification of Chi and Sigma Phases in Stainless Steel with the Electron Probe Microanalyzer |
L. S. Birks, J. M. Siomkajlo, and P. K. Koh |
| The Effect of Oxide Microstructure on theoxidation Kinetics of Cu-Ni-Mg Alloys |
J. A. Sartell, S. H. Bendel and C. H. Li |
| Precipitation Processes in Copper-Rich Copper-Iron Alloys |
A. Boltax |
| The Aging Characteristics of the Ti-13V-11Cr-4A1 Alloy |
R. A. Rawe, J. M. Dupouy, and M. B. Bever |
| The Absorption and Effusion of Hydrogen in Alpha Iron |
D. C. Carmichael, J. R. Hornaday, A. E. Morris and N. A. Parlee |
| The Role of Stress in Hydrogen Induced Delayed Failure |
E. A. Steigerwald, F. W. Schaller and A. R. Troiano |
| The Effect of Hydrogen on the Mechanical Behavior of Aged Alpha-Beta Titanium Alloys |
R. A. Nadler and D. L.Day |
| Structure and Properties of Titanium-Rich Titanium-Nickel Alloys |
J. W. Barton, G. R. Purdy, R. Taggart and J. G. Parr |
| Yttrium-Nickel System |
B. J. Beaudry and A. H. Daane |
| Cobalt-Rich Ternary Alloys with Tin and Carbon |
L. J. Huetter, H. H. Stadelmaier and W. K. Hardy |
| The Stress-Induced Ordering Internal Friction of Iron-Rich Alloys of Iron and Aluminum |
J. C. Shyne and M. J. Sinnot |
| Rare-Earth Compounds with the MgCu2 Structure |
J. H. Wernick and S. Geller |
| Deformation Modes of Zirconium at 77°, 575°, and 1075° |
K. E. J. Rapperport and C. S. Hartley |
| Influence of Processing Variables on the Properties of Nickel-Al2O3 Alloys |
L. J. Bonis and N. J. Grant |
| The Effects of Stored Energy and Recrystallization on the Creep Rupture Properties of Internally Oxidized Copper-Alumina and Copper-Silica Alloys |
Masao Adachi and N. J. Grant |
| Mechanical Properties of Tantalum Metal Consolidated by Melting |
M. Schussler and J. S. Brunhouse, Jr. |
| The Tantalum-Rhenium System |
J. H. Brophy, P. Schwarzkopf and J. Wulff |
| Growth Behavior of Cube-Oriented Secondary Recrystallization Nuclei in High-Purity Silicon Iron |
J. L. Walter and C. G. Dunn |
| Recovery of the High-Temperature Creep Properties of Polycrystalline Aluminum |
W. D. Ludemann, L. A. Shepard and J. E. Dor |
| The Interface Temperature of Two Media in Poor Thermal Contact |
G. Horvay and R. H. Edsal
|
| Dihedral Angle Measurement |
O. K. Riegger and L. H. Van Vlack |
| Some High-Temperature Properties of Copper-Chromium High-Conductivity Alloys |
M. J. Saarivirta and P. P. Taubenbla |
| Elevated Temperature Properties of Lithium-Fluoride and Magnesium-Oxide Single Crystals |
W. L. Phillips, Jr. |
| Recovery Properties of Lithium-Fluoride Single Crystals |
W. L. Phillips, Jr. |
| Surface Tension and Contact Angles of Copper-Nickel Alloys on Titanium Carbide |
T. J. Whalen and M. Humenik, Jr. |
| Crystallographic Angles for Magnesium. Rhenium. Ruthenium. Zinc. and Cadmium (TN) |
Alan Lawley |
| Intermediate Phases with the MgCu, Structure (TN) |
S. E. Haszko |
| The Influence of Hydrogen on the Lattice Parameters of Ti-Sn Alloys (TN) |
A. Coucoulas and H. Margolin |
| Crystallographic Angles of Calcium Tungstate (Tetragonal. c/a = 2.169) (TN) |
K. Nassau |
| The Work Hardening of Metals |
N. F. Mott |
| Hardening by Internal Oxidation as a Function of Velocity of the Oxidation Boundary |
J. L. Meijering |
| The Preparation and Properties of Barium. Barium Telluride, and Barium Selenide |
Edward Miller, Kurt Komarek and Irving Cadoff |
| Self-Diffusion in Alpha Iron |
R. J. Borg and C. E. Birchenall |
| The Application of Ultrasonic Energy to Ingot Solidification. I. |
D. H. Lane, J. W. Cunningham and W. A. Tiller |
| The Application of Ultrasonic Energy to Ingot Solidification. II. |
D. H. Lane and W. A. Tiller |
| Diffusion in the Iron-Chromium System |
H. W. Paxton and T. Kunitake |
| Recrystallization of Cold-Drawn Sintered Aluminum Powder |
E. J. Westerman and F. V. Lene |
| Precision Lattice Parameter Determination of Zirconium-Oxygen Solid Solution |
B. D. Lichter |
| A Further Study of Ti2Ni-Type Phases Containing Titanium, Zirconium, or Hafnium |
M. V. Nevitt, J. W. Downey and R. A. Morris |
| Annealing Twins and Coincidence Site Boundaries in High-Purity Lead |
K. T. Aust and J. W. Rutter |
| Growth of (110) [001] - Oriented Grains in High-Purity Silicon Iron - A Unique Form of Secondary Recrystallization |
J. L. Walter and C. G. Dunn |
| The Growth Rate of Bainite |
G. R. Speich and Morris Cohen |
| The Aging Characteristics of Cu-Ti |
G. T. Murray |
| A Metallographic Study of Precipitation of Copper from Alpha Iron |
E. Hornbogen and R. C. Glenn |
| Resistance Apparatus for the Continuous Measurement of Fine Wire Uniformity |
A. I. Michals, T. L. Weaver and R. C. Nelson |
| The Effect of Dilute Transition Element Additions on the Recrystallization of Iron |
E. P. Abrahamson II and B. S. Blakeney, Jr. |
| The Diffusivity of Hydrogen in Alpha Iron |
E. W. Johnson and M. L. Hill |
| Zn-ZnO Alloys for Dispersion Hardening (TN) |
Horace Pops and J. F. Libsch |
| Effect of Strain Rate and Temperature on the Compression Texture of Aluminum (TN) |
L. J. Dwiggins, W. J. Rogers and R. O. Williams |
| Ionic Disorder in Manganous Oxide (TN) |
C. E. Birchenall |
| X-Ray Line Broadening from Explosively Loaded Copper (TN) |
J. B. Cohen |