Volume 209
Institute of Metals Division, Iron and Steel Division and Extractive Metallurgy Division 1957
Title Page
Foreword
Contents

TECHNICAL NOTES Iron and Steel Division

TITLE AUTHOR
Use of Oxygen at Abbey Melting Shop, Steel Co. of Wales Ltd. A.J. Kesterton
Comparison of Blast Furnace Penetration With Model Studies J.B. Wagstaff and W.H. Holman
Hydrogen In Steelmaking Practice Henry Epstein, John Chipman, and Nicholas J. Grant
Some Observations on Ferrite-Carbide Aggregates in Alloy Steels E.S. Davenport
Thermodynamic Properties of CS And Solutions of Sulfur in Carbon-Saturated Liquid Iron; C.J.B. Fincham and R.A. Bergman
Effect of Oxygen Input Rates In the Decarburization of Chromium Steel G.W. Healy and D.C. Hilty
Diffusion of Calcium and Silicon in a Lime-Alumina-Silica Slag Helen Towers and John Chapman
Preparation and Properties of Boron Treated Nonaging Open Hearth Steel Eric R. Morgan and John C. Shyne
Continuous Casting Of Three Types of Low Carbon Steel F.G. Jaicks, L.E. Kraay, and M. Tenenbaum
An Efficient Method of Desulfurizing Liquid Pig Iron B. Trentini, L. Wahl, and M. Allard
Synthesis of Some Ferrites Horst Kedesdy and Arthur Tauber
An Oxygen Steelmaking Process F.W. Luersson, J.W. Halley, and M. Tenenbaum
Origin and Elimination of Hydrogen in Basic Open Hearth Steels W.L. Kerlie and J.H. Richards

EXTRACTIVE METTALLURGY DIVISON

TITLE AUTHOR
Engineering Aspects of Ion Exchange in Hydrometallurgy John Dasher, A.M. Gaudin and R.D. MacDonald
Phase Diagram and Vapor Pressure in the Systems NaC1-ZrClr4, KC1-ZrCl4, and NaC1-KC1 (1: 1 molar) - ZrC14. L.J. Howell, R.C. Sommer and H.H. Kellogg
Formation of Cracks in Soederberg Electrodes Used in Aluminum Reduction Plants Ove Sandberg, Leif Olsen and Torgrim Eftestoel
Equilibrium Between Titanium Metal, Titanium Dichloride, and Titanium Trichloride in Molten Sodium Chloride-Strontium Chloride Melts S. Mellgren and W. Opie
Roasting Reaction of Ferrous Sulfide Kichizo Niwa, Tsuguyasu Wada, and Yutaka Shiraishi
Some Aspects of the Physical chemistry of Hydrometallurgy J. Halpern
Cominco's New Sinter Plant E.A. Mitchell J.F. Melvin and R. Bainbridge
Differential High-Temperature Sulfatization of Cuyuna Manganese Ore Charles Prasky
Selective Sulfation for Cadmium Recovery at Josephtown Smelter (Discussion p. 1292) R.E. Lund and D.E. Warnes
Some Notes on Oroya Copper Slags I.L. Barker, J.S. Jacobi and B.H. Wadia
Reduction of Nickel by Hydrogen from Ammoniacal Nickel Sulfate Solutions V.N. Mackiw, W.C. Lin and W. Kunda
Dissolution of Lead Sulfide Ores in Acid Chlorine Solutions M.I. Sherman and J.D.H. Strickland
Thermodynamics of the Cu-Fe-S System at Matte Smelting Temperatures W.A. Krivsky and R. Schuhmann Jr.
Micrographic Study of Sulfide Roasting P.G. Thornhill and L.M. Pidgeon
Electrolytic Preparation of Thorium Metal B.C. Raynes, J.C. Bleiweiss, M.E. Sibert, and M.A. Steinberg
Asarco's New Electrolytic ,Plant at Corpus Christi, Texas A.C. Jephson and R.E. Allen
Dissolution of Pyrite Ores in Acid Chlorine Solutions M.I. Sherman and J.D.H. Strickland
Preparation of Uranium Metals by Fused Salt Electrolysis G. Meister and W.C. Lilliendahl
Electrical Conductivity of Fused Sodium Chloride-Calcium Chloride Mixtures Joseph B. Story and John T. Clarke
Conductivity and Sulfur Activity in Liquid Copper Sulfide M. Bourgon, G. Derge and G.M. Pound
Vacuum- Dezincing of Parkes' Process Zinc Crusts V.F. Leferrer

INSTITUTE OF METALS DIVISION

TITLE AUTHOR
Solubility of Boron in Fe3C and Variation of Saturation Magnetization, Curie Temperature, And Lattice Parameter of Fe3(C,B) With Composition M.E. Nicholson
Upper Nose Temper Embrittlement of a Ni-Cr Steel (Discussion 1316) L.D. Jaffe and D.C. Buffum
Free Energy of Formation of Mn7C3 From Vapor Pressure Measurements C. Law McCabe and R.G. Hudson
On the Nature of Embrittlement Occurring While Tempering a Ni-Cr Alloy Steel (Discussion 1310) G. Bhat and J.F. Libsch
Uranium-Silicon Alloys A. Kaufmann, B. Cullity, and G. Bitsianes
Structure of the Transition Phase Omega In Ti-Cr Alloys A.E. Austin and J.R. Doig
Investigation of the Effects of Solutes on the Grain Boundary Stress Relaxation Phenomenon S. Weing and E.S. Machlin
Embrittlement of Ti-A1 Alloys in The 6 to 10 Pct A1 Range (Discussion p. 1304) F.A. Crossley and W.F. Carew
Solid Solubility of Carbon in Chromium W.H. Smith
Uranium-Zinc System P. Chiotti, H.H. Klepfer and K.J. Gill
Creep of Single Crystals and Polycrystals Of Aluminum, Lead. and Tin (Discussion p. 1299) C.D. Wiseman, O.D. Sherby, and J.E. Dorn
Magnetic Method for the Measurement of Preci~itate Particle Sizes in a Cu-Co Alloy (Discussion p. 1309) J.J. Becker
Control of Strain Aging in Alpha-Iron Eric R. Morgan and J.C. Shyne
Sigma-Phase in Certain Ternary Systems With Vanadium Joseph B. Darby Jr. and Paul A. Beck
Constitution of Nickel-Rich Quinary Alloys in the System Ni-Fe-Cr-Ti-Al A. Taylor
Grain-Boundary Displacement vs. Grain Deformation as the Rate-Determining Factor in Creep (Discussion p. 1308) J.A. Marton, M. Herman amd N. Brown
Simple Orientation Relationships for Secondary Recrystallization in Si-Fe C.G. Dunn and P.K. Koh
Nucleation of Voids in Metals During Diffusion and Creep (Discussion p. 1310) R. Resnick and L. Segle
Preliminary Investigation of the Ti-Ce System Jack L. Taylor
Studies on Diffusion in Molten Metals (Discussion p. 1314) Kichizo Niwa, Mitsuo Shimoji, Satoshi Kado, Yoshihiko Watanabe and Toshio Yokokawa
Effect of Rolling Procedure on the Kinetics Of Recrvstallization of Cold-Rolled Copper (Discussion p. 1303) T. Michalak and W.R. Hibbard Jr.
Hydrogen Embrittlement in an Ultra-High-Strength 4340 Steel E.P. Klier, B.B. Muvdi and G. Sachs
Tensile Deformation of Silver as a Function of Temperature, Strain Rate, and Grain Size R.P. Carreker Jr.
Metallography of Aluminum Powder Extrusions F.V. Lenel, G.S. Ansell and E.C. Nelson
Properties of Aluminum Powders And of Extrusions Produced From Them F.V. Lenel, A.B. Backensto Jr. and M.V. Rose
Uranium-Bismuth System R.J. Teitel
Effect of Orientation on the Plastic Deformation of Aluminum Single Crystals and Bicrystals (Discussion, p. 1302) R.S. Davis, R.L. Fleischer, J.D. Livingston and Bruce Chalmers
On the Kinetics of the Pearlite Reaction John W. Cahn
Dispersed Hard Particle Strengthening of Metals - Annual Powder Metallurgy Symposium-1956 Nicholas J. Grant and Oliver Preston
Electron Probe Microanalyzer and Its Application to Ferrous Metallurgy R. Casting, J. Philibert, and C. Crussard
Oxidation of Zirconium Between 400" and 800°C Earl A. Gulbransen and Kenneth F. Andrew
Prot Fatigue Study of an Aircraft Steel in the Ultra High Strength Range P.W. Ramsey and D.P. Kedzie
Effect of Dissolved Oxygen on the Grain Size of Annealed Pure Copper and Cu-A1 Alloys D.L. Wood
Some Properties of Certain High-Conductivity Copper-Base Alloys (Discussion, p. 1311) Webster Hodge
Habit Planes of Martensite In Chrome-Carbon Steel H.M. Otte and T.A. Read
Effects of Solid Solution Alloying on Creep Deformation of Aluminum Gordon D. Gemmell and Nicholas J. Grant
Central Region of the Mg-Zn Phase Diagram J.B. Clark and F.N. Rhines
Electron Diffraction Study of Flake Graphite Extracted from Molten Pig Iron Kichizo Niwa and Goro Shimaoka
Some Estimates of the Thermal Stability Of Dispersion-Hardened Alloys A.W. Cochardt
Grain Growth of Titanium Carbide in Nickel Leonard P. Skolnick
Strength of Silver Brazed Joints in Mild Steel (Discussion, p. 1312) W.G. Moffatt and J. Wulff
Flaking of Heavy Alloy Steel Sections (Discussion, p. 1306) C.R. Garr and A.R. Troiano
Nucleation of Dislocation Loops by Cracks in Crystals J.J. Gilman
Strain Induced Transformation in Beta Brass (Discussion, p. 1312) T.B. Massalski and C.S. Barett
High-Strength Zirconium Alloy: Zr-4 Wt Pct Sn-1.6 Wt Pct Mo W. Chubb
Effect of Small Amounts of Alloying Elements on the Ductility of Cast Molybdenum L.E. Olds and G.W.P. Rengstorff
Structural Changes Associated with Strain-Induced Grain Boundary Migration in Si-Fe K.T. Aust and C.G. Dunn
Zone Purification of Reactive Metals R.L. Smith and J.L Rutherford
Crack Propagation in the Hydrogen-Induced Brittle Fracture of Steel W.J. Barnett and A.R. Troiano
Deformation of Magnesium Single Crystals By Nonbasal Slip Robert E. Reed-Hill and William D. Robertson
Effect of Temperature on the Flow Stress And Strain-Hardening coefficient Of Magnesium Single Crystals (Discussion, p. 1303) Hans Conrad and W.D. Robertson
Action of Vibration on Solidifying Aluminum Alloys (Discussion, p. 1295) P.D. Southgate
Diffusion of Calcium and Silicon in a Lime-Alumina-Silica Slag Helen Towers and John Chipman
Preparation and Properties of Boron Treated Nonaging Open Hearth Steel Eric R. Morgan and John C. Shyne
Effects of Compression and Annealing on the Structure and Electrical Properties of Germanium E.S. Greiner, P. Breidt Jr., J.N. Hobstetter, and W.C. Ellis
Calculation of Diffusion Coefficients by the Matano-Boltzmann Method E.M. Baroody
Some Aspects of Alloying Onto Germanium Surfaces J.W. Peterson, J. McGlassan Jr., and W.C. Hittinger
On a Mechanism of High Temperature Intercrystalline Cracking C.W. Chen and E.S. Machlin
Cube Texture in Copper Y.C. Liu
Grain Growth in Dilute Alloys of Copper S. Weinig and E.S. Machlin
Preferred Growth Direction of Metals William A. Tiller
Tensile Properties of Zone Refined Iron in The Temperature Range from 298° to 4.Z°K R.L. Smith and J.L. Rutherford
Aging in Complex Commercial Ni-Cr Alloys Hardened with Titanium and Aluminum Robert F. Wilde and Nicholas J. Grant
Diffusion in Gold and Au-Ag Alloys H.W. Mead and C.E. Birchenall
Constitution of Delta-Phase Alloys of the System U-Zr-Ti H.A. Saller, F.A. Rough, A.A. Bauer, and J.R. Doig
Preparation of Alpha Uranium Single Crystals By a Grain-Coarsening Method E.S. Fisher
Elevated Temperature Phase Relationships In the Cr-Ni-Mn-N System E.J. Whittenberger, E.R. Rosenow and D.J. Carney
Electrical Resistivities and Phase Transformations of Lanthanum. Cerium. Praseodymium. and Neodymium F.H. Spedding, A.H. Daane and K.W. Herrmann
Temperature Dependence of the Hardness of Secondary Phases Common in Turbine Bucket Alloys J.H. Westbrook
Shear Along Grain Boundaries In Aluminum Bicrystals S.K. Tung and R. Maddin
Intermetallic Compounds In Titanium-Hardened Alloys H.J. Beattle Jr. and W.C. Hagel
Hydrogen Distribution in Heat-Treated Titanium as Established by Autoradiography O.J. Huber, J.E. Gates, A.P. Young, M, Pobereskin and P.D. Frost
Blister Formation in Rolled Aluminum J.H. O’Dette
Abrupt Yielding and the Ductile-to-Brittle Transition in Body-Centered-Cubic Metals E.T. Wessel
Diffusion of Magnesium, Silicon. and Molybdenum in Nickel R.A. Swalin, Allan Martin, and R. Olson
Tensile Deformation of Aluminum as a Function Of Temperature. Strain Rate, and Grain Size R.P. Carreker Jr., and W.R. Hibbard Jr.
Cross-Rolling and Annealing Textures In High-Purity Iron Hsun Hu
Effects of Crystal Orientation, Temperature, and Molten Zone Thickness in Temperature-Gradient Zone Melting J.H. Wernick
Stability of AISI Alloy Steels A.B. Wilder, E.F. Ketterer and D.B. Collyer
Creep of Al-Cu Alloys During Age Hardening Ervin E. Underwood
Transformation Kinetics and Mechanical Properties Of Zr-Mo Alloys R.F. Domagala, D.W. Levinson, and D.J. McPherson
Copper-Silica and Copper-Alumina Alloys Of High Temperature Interest Klaus M. Zwilsky and Nicholas J. Grant
Approximate Method for Calculations Using concentration-Dependent Diffusion Coefficients A.G. Guy, M. Golomb and A.S. Yue
Diffusion of the Elements of the IB and IIB Subgroups in Silver A. Sawatzky and F.E. Jaumot Jr.
Elastic Properties of Yttrium and Eleven Of the Rare Earth Elements J.F. Smith, C.E. Carlson and F.H. Spedding
Mechanism of Precipitation in a Cu-2.5 Pct Fe Alloy J.B. Newkirk
Some Observations on 885°F Embrittlement G.F. Tisinai and C.H. Samans
Phase Transformations in Hypoeutectoid Ti-Cr Alloys H.I. Aaronson, W.B. Triplett, and G.M. Andes
The Uranium-Silicon Epsilon Phase S. Isserow
Misfit Strain Energy in the Au-Cu System Ralph Hultgren
Sand Cast Magnesium-Rare Earth Metal-Zirconium Alloys T.E. Leontis and D.H. Feisel
Grain Boundary Deformation in Fine-Grained Electrolytic Magnesium S.L. Couling and C.S. Roberts
Nature of the Ni-Cr System Robin O. Williams
Effect of Heat Treatment on the Hardness and Microstructure of U-Ti Alloys David L. Douglas and Lyle L. Marsh Jr.
CsCl-Type Ordered Structures in Binary Alloys of Transition Elements T.V. Philip and Paul A. Beck
Notch Tensile Properties of Selected Titanium Alloys E.P. Klier and N.J. Feola
Distribution of Boron in Gamma Iron Grains R.M. Goldhoff and J.W. Spretnak
Some Internal Friction Studies in Columbium R.W. Powers and Margaret V. Doyle

TECHNICAL NOTES

TITLE AUTHOR
Aluminum-Magnesium Equilibrium Diagram J.B. Clark and F.N. Rhines
Twinning in Indium Antimonide Peter Haasen
X-Ray Satellite Line Structure of Ferrite for CrK Radiation V. Weiss and E.P. Klier
Elastic Coefficients of Single Crystals of Alpha Brass W.R. Hibbard Jr.
Effects of Aluminum on the Cold-Rolled Textures of Titanium C.J. Sparks Jr., C.J. McHargue, and J.P. Hammond
Unusual Twinning in Annealed Copper R.L. Segall
Rate of Capillary Rise of Liquid Metal in a Higher Melting Metal Powder Compact K.A. Semlak, C.W. Spencer and F.N. Rhines
Protective Film on Titanium in Hydrochloric Acid Rikuro Otsuka
Etch Pits and Slip Bands in Silicon F.D. Rosi
Effect of Nitrogen on Hardenability in Boron Steels John C. Shyne and Eric R. Morgan
Embrittling Effect of Molybdenum on Electrodeposited Copper H.R. Skewes
Information from Normal Grain Growth C.G. Dunn and P.K. Foh
Preferred Orientation in Extruded Uranium Rod L.K. Jetter and C.J. McHargue
X-ray Microscopy of As-Grown and Deformed Single Crystals of Aluminum J.H. Auld, R.A. Coyle, A.M. Marshall and N.A. McKinnon
Stepped Austenitizing Treatment for 4340 Steel E.P. Klier, Volker Weiss and George Sachs
Compounds in the Titanium-Rich Region of the Ti-A1 System Elmars Ence and Harold Margolin
Cleavage Steps and the Cleavage Plane in Chemically Embrittled Cu3 Au Single Crystals Robert Bakish
Comparison of the Strength of Sintered Carbides Joseph Gurland
Remeasurement of Liquidus Temperatures of Mg-Ba Alloys K.P. Anderko
Peritectoid Transformation in Ag-Al Alloys C.W. Spencer, R.J. Knight abd F.N. Rhines
Effect of Strain and Temperature on the Yielding of Copper and Nickel J.H. Frye Jr., J.L. Scott and J.W. Woods
Bismuth in Copper Grain Boundaries C.W. Spencer, R.A. Rummel and F.N. Rhines
Further Contribution to the Crystallographic Angles for Bismuth and Antimony W. Vickers
Concerning an Order-Disorder Transition in the Ni-Cr System B.W. Roberts and R.A. Swalin
Nucleation Sites of Bainitic Carbides in Alloy Steels S.M. Kaufman, G.M. Pound, and H.I. Aaronson
X-Ray Diffraction Study of the Sigma Phase in the Systems Re-Cr. Ru-Cr. and Os-Cr R.M. Waterstrat and J.S. Kasper
Determination of Orientation in Magnesium By polarized Light Examination S.L. Couling and G.W. Pearsall
Zone Refining of Bismuth J.H. Wernick, K.E. Benson and D.Dorsi
Sigma Phases Containing Osmium and Iridium M.V. Nevitt and J.W. Downey
Formation of Intermetallic Layers in Diffusion Couples L.S. Castleman and L.L. Seigle
Preparation and Diffraction Data of Ba-A1 Alloys Dilip K. Das and Douglas T. Pitman
Investigation of the Nickel-Rich Portion of the System Ni-Zr Emma Smith and R.W. Guard
Some Characteristics of the Martensite Transformation of Cu-Al-Ni Alloys C.W. Chen
Investigation of Grain Boundary Phase In Stainless Steel C.C. Clark, J.R. Mihalisin, and K.G. Carroll
Temperature Dependence of the Tensile Properties of Vanadium J.W. Pugh
Growth of Iron Alloy Single Crystals from the Melt R.C. Hall
Cylindrical Carbide Particles J.H. Westbrook
Crystallographic Angles for Manganese Bismuthide W.J. Romanow
On Complex Formation in the System Na3, AIF6-Al2O3 Tormod Forland
Mass Spectrometric Examination of Anode Gases from Aluminum Reduction Cells Jack L. Henry and R.D. Holliday
Electrical Conductivity of PbO-B203 Melts Wm. C. Phelps Jr., and R.E. Grace

DISCUSSIONS

TITLE AUTHOR
Institute of Metals Division  
Iron and Steel Division  
Extractive Metallurgy Division  
Institute of Metals Division  

INDEX

TITLE AUTHOR
Index