Volume 167
Iron and Steel Division 1946
Technical Papers, Discussions and Symposia Presented before the Division at meetings held at Cleveland, October 16-18, 1944; New York, October 25-26, 1945; and Chicago, February 25-28, 1946; Also the Howe Lecture Scheduled for the New York Meeting, February 1945, which was canceled
Title Page
Foreword by W. E. Brewster
A.I.M.E. Officers and Directors
Contents
Iron and Steel Division Officers and Committees
Howe Lectures and Lecturers
Photograph of T. L. Joseph, Howe Lecturer 1946
Photograph of Marcus L. Grossmann, Howe Lecturer, 1945

Technical Papers and Discussions

Howe Lecture

TITLE AUTHOR
The Blast-furnace Process and Means of Control (Metals Tech., April 1946, T. P. 2021) T. L. Joseph
Toughness and Fracture of Hardened Steels (Metals Tech., April 1946, T. P. 2020) Marcus A. Grossmann

Steelmaking

TITLE AUTHOR
A Radiation Pyrometer for Open-hearth Bath Measurements (Metals Tech., June 1946, T. P. 2031) H. T. Clark and S. Feigenbaum
The Boron-oxygen Equilibrium in Liquid Iron (Metals Tech., Aug. 1946, T. P. 2004, with discussion) Gerhard Derge
An Equilibrium Study of the Distribution of Phosphorus between Liquid Iron and Basic Slags (Metals Tech., April 1946, T. P. 1987) Theodore B. Winkler and John Chipman
Sulphur Equilibria between Liquid Iron and Slags (Metals Tech., April 1946, T. P. 1988 with discussion) Nicholas J. Grant and John Chipman

Properties of Metals; Sponge Iron

TITLE AUTHOR
Anelasticity of Metals (Metals Tech., Aug. 1946, T. P. 1992, with discussion) Clarence Zener
Elastic After-effects in Iron Wires from 20oto 550o C (Metals Tech., Aug. 1946, T. P. 1993, with discussion) William A. West
Vicalloy-A Workable Alloy for Permanent Magnets (Abst.) (Metals Tech., Feb. 1946, T. P. 1973) E. A. Nesbitt
Grain-growth Inhibitors in Steel (Metals Tech., June 1946, T. P. 2030, with discussion) James W. Halley
The Low-temperature Gaseous Reduction of Magnetite Ore to Sponge Iron (Metals Tech., June 1946, T. P. 1960 with discussion) O. George Specht, Jr., and Carl A. Zapffe

Stainless Steel and Iron-silicon Alloys

TITLE AUTHOR
A Test for Hydrogen Embrittlement and Its Application to 17 Per Cent Chromium, 17 Percent Carbon Stainless-steel Wire (Metals Tech., Jan. 1946, T. P. 1954, with discussion) Carl A. Zapffe and M. Eleanor Haslem
A Precipitation-hardening Stainless Steel of the 18 Per Cent Chromium, 8 Per cent Nickel Type (Metals Tech., June 1946, T. P. 2006, with discussion) R. Smith, E. H. Wyche and W. W. Gorr
Constitution of Commercial Low-carbon Iron-silicon Alloys (Metals Tech., Feb. 1946, T. P. 1966, with discussion) R. L. Rickett and N. C. Fick
Effect of Original Orientation on Orientation Changes during Recrystallization in Silicon Ferrite (Metals Tech., Aug. 1946, T. P. 1990, with discussion) C. G. Dunn
Some Aspects of Crystal Recovery in Silicon Ferrite Following Plastic Strains (Metals Tech., Aug. 1946, T. P. 1991) C. G. Dunn
The Solubility of Hydrogen in Molten Iron-silicon Alloys (Metals Tech., Feb. 1946, T. P. 1975, with discussion) Hung Liang, Michael B. Bever and Carl F. Floe

Transformation of Austenite

TITLE AUTHOR
Some Factors Affecting Edgewise Growth of Pearlite (Metals Tech., Dec. 1945, T. P. 1857, with discussion) W. H. Brandt
Anisothermal Decomposition of Austenite (Metals Tech., Aug. 1946, T. P 2008, with discussion) J. H. Hollomon, L. D. Jaffe and M. R. Norton
Relationship between Transformation at Constant Temperature and Transformation during Cooling (Metals Tech., June 1946, T. P. 2014, with discussion); G. K. Manning and C. H. Lorig
The Temperature Range of Martensite Formation (Metals Tech., June 1946, T. P. 1996, with discussion) R. A. Grange and H. M. Stewart
Hardenability Effects in Relation to the Percentage of Martensite (Metals Tech., April 1946, T. P. 1994, with discussion) J. M. Hodge and M, A, Orehoski
Equilibrium Relations in Medium-alloy Steels (Metals Tech., Jan. 1946, T. P. 1856, with discussion) Clarence Zener
Phase Boundaries in Medium-alloy Steels (Metals Tech., Jan. 1946, T. P. 1924, with discussion) W. A. West
Kinetics of the Decomposition of Austenite (Metals Tech., Jan. 1946, T. P. 1925, with discussion) Clarence Zener

Symposia

Symposium on Hardenability

TITLE AUTHOR
Introduction M. A. Grossman
The Hardenability Concept (Metals Tech., Jan. 1946, T. P. 1926 with discussion) J. H. Hollomon and L. D. Jaffe
Hardenability and Quench Cracking (Metals Tech., Jan. 1946, T. P. 1927 with discussion) L. D. Jaffe an d John H. Hollomon
Relationship between Hardenability and Percentage of Martensite in Some Low-Alloy Steels (Metals Tech., Sept. 1945, T.P. 1800 with discussion) J. M. Hodge and M. A. Orehoski
Determination of Most Efficient Alloy Combinations for Hardenability (Metals Tech., Sept. 1945, T.P. 1905 with discussion) H. E. Hostetter
An Appraisal of the Factor Method for Calculating the Hardenability of Steel from Composition. (Metals Tech., Oct. 1945, T.P. 1933) with discussion G. R. Brophy and A. J. Miller
Factors for the Calculation of Hardenability (Metals Tech., June 1946, T. P. 2029 with discussion) Irvin R. Kramer, Sidney Sigel and J. Gardner Brooks
Addition Method for Calculating Rockwell C Hardness of the Jominy Hardenability Test (Metals Tech., Oct. 1945, T. P. 1928 with discussion) Walter Craft and John L. Lamont
The Influence of Titanium on the Hardenability of Steel (Metals Tech., Sept. 1945, T.P. 1904 with discussion) G. F. Comstock

Symposium on Hot-Working

TITLE AUTHOR
Symposium on Hot-Working – Contents  
A Laboratory Evaluation of the Hot-working Characteristics of Metals (Metals Tech., Dec. 1945, T.P. 1839) C. L. Clark and J. Russ
Effect of Various Elements on the Hot-workability of Steel (Metals Tech., Oct. 1945, T.P. 1932) Harry K. Ihrig
Discussion  

INDEX

TITLE AUTHOR
Contents Volume 166, Institute of Metals Division, 1946  
Index