Volume 161
Institute of Metals Division 1945
Technical Papers and Discussions and Symposia Presented before the Division at Meetings held at New York, February 20-24, 1944 and at Cleveland, October 16-18, 1944; also Papers Scheduled for the Meeting at New York, February 19- 22, 1945, which was Canceled

Title Page

Foreword By E. E. Schumacher

Contents

A.I.M.E. Officers and Directors

Institute of Metals Division Officers and Committees

Annual Awards Certificate

Institute of Metals Division Lectures and Lecturers

Photograph of Charles M. Barrett, Institute of Metals Division Lecturer

Technical Papers and Discussions

Institute of Metals Division Lecture

TITLE	AUTHOR
A New Microscopy and Its Potentialities (Metals Technology, April 1945)	Charles S. Barrett

Physical Metallurgy

TITLE	AUTHOR
Fundamental Principles Involved in Segregation in Alloy Castings (Metals Technology, Sept. 1944)	R. M. Brick
A Study of Age-hardening Using the Electron Microscope and Formvar Replicas (Metals Technology, June 1945)	D. Harker and M. J. Murphy
Standards for Identifying Complex Twin Relationships in Cubic Crystals (Metals Technology, April 1945)	C. G. Dunn
Orientation Changes during Recrystallization in Silicon Ferrite (Metals Technology, April 1945)	C. G. Dunn
The Orientation Texture at the Surface of Cast Metals (Metals Technology, Jan. 1945) (With discussion)	Gerald Edmunds
Internal Friction of Single Crystals of Brass, Copper and Aluminum (Metals Technology, June 1945) (With discussion)	George H. Found
Recrystallization of in Terms of the Rate of Nucleation and the Rate of Growth (Metals Technology, Feb. 1945) (With discussion)	W. A. Anderson

Copper and Copper-Rich Alloys

TITLE	AUTHOR
Textures, Anisotropy and Earing Behavior of Brass (Metals Technology, June 1945) (With discussion)	F. H. Wilson and R. M. Brick
Phantom Laminations in Brass (Metals Technology, Jan. 1945) (With discussion)	Daniel R. Hull, H. F. Silliman and John R. Freeman, Jr.
Corrosion of Yellow Brass Pipes in Domestic Hot-water Systems-a Metallographic Study (Metals Technology, Oct. 1944) (With discussion)	E. P. Polushkin and Henry L. Shuldener
The Alpha Solid Solution Field of the Copper-manganese-zinc system (Metals Technology, June 1945)	R. S. Dean, J. R. Long, T. R. Graham and A. H. Roberson
White high-manganese Brass (Metals Technology, June 1945)	R. S. Dean, J. R. Long, T. R. Graham and C. W. Matthews

Magnesium Alloys

TITLE	AUTHOR
Oxidation Inhibitors in Core-sand Mixtures for Magnesium Castings (Metals Technology, Feb. 1945) (With discussion)	O. Jay Myers
Grain Size and Properties of Sand-cast Magnesium Alloys (Metals Technology, Feb. 1945) (With discussion)	R. S. Busk and C. W. Phillips
Water Quenching of Some Typical Magnesium Casting Alloys (With discussion)	R. S. Busk and R. E. Anderson
Factors Affecting Abnormal Grain Growth in Magnesium-alloy Castings (Metals Technology, June 1945) (With discussion)	A. T. Peters, R. S. Busk and H. E. Elliott
Gain Refinement of a Carbothermic Magnesium Alloy by Superheating (Metals Technology, June 1945)	Ralph Hultgren, David W. Mitchell and Bernard York
Grain Refinement of Magnesium Alloys without Superheating (Metals Technology, June 1945)	Ralph Hultgren and David W. Mitchell
A Study of Factors Influencing Grain Size in Magnesium Alloys and a Carbon Inoculation Method for Grain Refinement (Metals Technology, June 1945) (With discussion)	C. H. Mahoney, A. L. Tarr and P. E. Le Grand
Solubility of Manganese in Liquid Magnesium (Metals Technology, June 1945) (With discussion)	N. Tiner

Miscellaneous Metals and Alloys

TITLE	AUTHOR
The Hardness of Silver-antimony Solid Solutions (Metals Technology, Oct. 1944)	R. M. Treco and J. H. Frye, Jr.
The Constitution of the Gold-germanium System (Metals Technology, June 1945)	Robert I. Jaffee, Eugene M. Smith and Bruce W. Gonser
Hydrogen Content of Electrolytic Manganese and Its Removal (Metals Technology, June 1945)	E. V. Potter, E. T. Hayes and H. C. Lukens
Substitute Solders of the 15-85 Tin-lead Type (Metals Technology, Oct. 1944) (With discussion)	J. B. Russell and J. O. Mack

Symposia

Symposium on Creep of Nonferrous Metals and Alloys

TITLE	AUTHOR
Contents and Introduction
Application of Nonferrous Alloys in Stress Design	J. J. Kanter
Discussion
Creep Characteristics of a Phosphorized Copper	H. L. Burghoff and A. I. Blank
Discussion
Creep Properties of Cold-drawn Annealed Monel and Inconel	B. B. Betty, H. L. Eiselstein and F. P. Huston, Jr.
Discussion
Properties of Some Cast Copper-base Alloys at Elevated Temperatures	H. E. Montgomery
Discussion
Creep Data on Die-cast Zinc Alloy	E. H. Kelton and R. D. Grissinger
Discussion
Creep Properties of Some Rolled Lead-antimony Alloys	A. A. Smith and H. E Howe
Discussion

Symposium on Continuous Casting (Metals Technology, February 1945)

TITLE	AUTHOR
Opening Remarks	Carl E. Swartz
Continuous Casting Yesterday and Today	T. W. Lippert
Continuous Casting of Molten Metals-History, Requirements, Metallurgy, and Economics	Norman P. Goss
Discussion
Improvements in the Direct Rolling of Strip Metal	C. W. Hazelett
The Soro Process	E. J. Valyi
The Williams Process of Casting Metals	E. R. Williams

Conference on Production and Design Limitation and Possibilities for Powder Metallurgy
(Metal Technology, January 1945)

TITLE	AUTHOR
Contents - Foreword	F. H. Rhines
Design Factors for the Metal Forms with Which Powder Metallurgy May Compete	Fred P. Peters
Discussion
Powder Metallurgy as Applied to Machine Parts	A. J. Langhammer
Discussion
Pole Pieces for Electric Motors Made from Iron Powder	F. V. Lenel
Discussion
Bearings from Metal Powders	W. R. Toeplitz
Discussion
Brushes and Allied Powder-metal Parts	R. R. Hoffman
Electrical Contacts Manufactured from Metal Powders	E. I. Larsen
Sintered Magnets	C. R. Fulton
Friction Articles from Metal Powders	C. T. Cox
Discussion
Certain Characteristics of Silver-base Powder Metallurgical Products	F. R. Hensel
Discussion
Some Properties of Sintered and Hot-pressed Copper-tin Powder Compacts	C. G. Goetzel
Discussion
The Sintering of Metal Powders-Copper (Metals Technology, October 1944)	C. J. Bier and J. F. O’Keefe
Some Experiments on the Effect of Pressure on Metal-powder Compacts	Jerome F. Kuzmick
Discussion

INDEX

TITLE	AUTHOR
Contents of 1945 Iron and Steel Volume
Index