|
Title
|
Author
|
| Index |
|
| Title Page |
|
| Contents |
|
| Sponge and Mill Production Economics |
Kellogg, H. H. |
| Mill and Fabrication Economics |
Gordon, S. A. |
| Analytical Development |
Vigo, S. |
| Practical Problems Associated with the Control of Interstitials |
Handova, C. – Busch, L. S. – Brown, H. |
| Engineering Aspects of Ion Exchange in Hydrometallurgy |
Dasher, J. – Gaudin, A. M. – Macdonald, R. D. |
| Phase Diagram and Vapor Pressure in the Systems NaCI-ZrCI4, KCI-ZrCI4, and NaCL-KCI (1:1 molar) – ZrCI4 |
Howell, L. J. – Sommer, R. C. – Kellogg, H. H. |
| Embrittling Effect of Molybdenum on Electrodeposited Copper |
Skewes, H. R. |
| Contents |
|
| Solubility of Boron in Fe3C and Variation of Saturation Magnetization, Curie Temperature, and Lattice Parameter of Fe3 (C,B) With Composition |
Nicholson, M. E. |
| Aluminum-Magnesium Equilibrium Diagram |
Clark, J. B. – Rhines, F. N. |
| Upper Nose Temper Embrittlement of a Ni-Cr Steel |
Jaffe, L. D. – Buffum, D. C. |
| Free Energy of Formation of Mn7C3 from Vapor Pressure Measurements |
McCabe, C. L. – Hudson, R. G. |
| On the Nature of Embrittlement Occurring While Tempering a Ni-Cr Alloy Steel |
Bhat, G. – Libsch, J. F. |
| Uranium-Silicon Alloys |
Kaufmann, A. – Cullity, B. – Bitsianes, G. |
| Structure of the Transition Phase Omega in Ti-Cr Alloy |
Austin, A. E. – Doig, J. R. |
| Twinning in Indium Antimonide |
Haasen, P. |
| Investigation of the Effects of Solutes on the Grain Boundary Stress Relaxation Phenomenon |
Weinig, S. – Machlin, E. S. |
| X-Ray Satellite Line Structure of Ferrite for CrK Radiation |
Weiss, V. – Klier, E. P. |
| Embrittlement of Ti-AI Alloys in the 6 to 10 Pct AL Range |
Crossley, F. A. – Carew, W. F. |
| Elastic Coefficients of Single Crystals of Alpha Brass |
Hibbard, W. R. Jr. |
| Solid Solubility of Carbon in Chromium |
Smith, W. H. |
| Effects of Aluminum on the Cold-Rolled Textures of Titanium |
Sparks, C. J. Jr. – McHargue, C. J. – Hammond, J. P. |
| Unusual Twinning in Annealed Copper |
Segall, R. L. |
| Uranium-Zinc System |
Chiotti, P. – Klepfer, H. H. – Gill, K. J. |
| Creep of Single Crystals and Polycrystals of Aluminum, Lead, and Tin |
Wiseman, C. D. – Sherby, O. D. – Dorn, J. E. |
| Magnetic Method for the Measurement of Precipitate Particle Sizes in a Cu-Co Alloy |
Becker, J. J. |
| Rate of Capillary Rise of Liquid Metal in a Higher Melting Metal Powder Compact |
Semlak, K. A. – Spencer, C. W. – Rhines, F. N. |
| Control of Strain Aging in Alpha-Iron |
Morgan, E. R. – Shyne, J. C. |
| Sigma-Phase in Certain Ternary Systems with Vanadium |
Darby, J. B. Jr. – Beck, P. A. |
| Constitution of Nickel-Rich Quinary Alloys in the System Ni-Fe-Cr-Ti-Al |
Taylor, A. |
| Protective Film on Titanium in Hydrochloric Acid |
Otsuka, R. |
| Etch Pits and Slip Bands in Silicon |
Rosi, F. D. |
| Grain-Boundary Displacement vs. Grain Deformation as the Rate-Determining Factor in Creep |
Martin, J. A. – Herman, M. – Brown, N. |
| Simple Orientation Relationships for Secondary Recrystallization in Si-Fe |
Dunn, C. G. – Koh, P. K. |
| Nucleation of Voids in Metals During Diffusion and Creep |
Resnick, R. – Seigle, L. |
| Preliminary Investigation of the Ti-Ce System |
Taylor, J. L. |
| Studies on Diffusion in Molten Metals |
Niwa, K. – Shimoji, M. – Kado, S. – Watanabe, Y. – Yokokawa, T. |
| Effect of Rolling Procedure on the Kinetics of Recrystallization of Cold-Rolled Copper |
Michalak, J. T. – Hibbard, W. R. Jr. |
| Hydrogen Embrittlement in an Ultra-High-Strength 4340 Steel |
Klier, E. P. – Muvdi, B. B. – Sachs, G. |
| Tensile Deformation of Silver as a Function of Temperature, Strain Rate, and Grain Size |
Carreker, R. P. Jr. |
| Effect of Nitrogen on Hardenability in Boron Steels |
Shyne, J. C. – Morgan, E. R. |
| Metallography of Aluminum Powder Extrusions |
Lenel, F. V. – Ansell, G. S. – Nelson, E. C. |
| Properties of Aluminum Powders and of Extrusions Produced from Them |
Lenel, F. V. – Backensto, A. B. Jr. – Rose, M. V. |
| Uranium-Bismuth System |
Teitel, R. J. |
| Effect of Orientation on the Plastic Deformation of Aluminum Single Crystals and Bicrystals |
Davis, R. S. – Fleischer, R. L. – Livingston, J. D. – Chalmers, B. |
| On the Kinetics of the Pearlite Reaction |
Cahn, J. W. |
| Title Page |
|
| Contents |
|
| Improving Hot-Ductility of 310 Stainless |
Perkins, R. A. – Binder, W. O. |
| Sponge Iron in Electric Arc Furnaces |
Stalhed, J. L. |
| A Program for Fundamental Research in Hard Metals |
Duwez, P. |
| The Steel Industry and International Flame Research |
Riviere, M. |
| Heat Treatment Restores Ductility to Forged Titanium Alloys |
Williams, D. N. – Jaffee, R. I. |
| Formation of Cracks in Soederberg Electrodes Used in Aluminum Reduction Plants |
Sandberg, O. – Olsen, L. – Eftestoel, T. |
| Equilibrium Between Titanium Metal, Titanium Dichloride, and Titanium Trichloride in Molten Sodium Chloride-Strontium Chloride Melts |
Mellgren, S. – Opie, W. |
| Roasting Reaction of Ferrous Sulfide |
Niwa, K. – Wada, T. – Shiraishi, Y. |
| Use of Oxygen at Abbey Melting Shop, Steel Co. of Wales Ltd. |
Kesterton, A. J. |
| Some Aspects of the Physical Chemistry of Hydrometallurgy |
Halpern, J. |
| Information from Normal Grain Growth |
Dunn, C. G. – Koh, P. K. |
| Preferred Orientation in Extruded Uranium Rod |
Jetter, L. K. – McHargue, C. J. |
| Title Page |
|
| Contents |
|
| Introduction |
Lenel, F. V. |
| Metallic Filters by Powder Metallurgy |
Haertlein, J. |
| High Strength Structural Parts By Powder Metallurgy |
Hausner, H. H. |
| Ferromanganese From Low-Grade Ores |
Burke, J. J. |
| Cobalt Pressure Leaching and Reduction at Garfield |
Mitchell, J. S. |
| Nonferrous Research Uses Solar Furnace |
Tuddenham, W. M. |
| Powder Metallurgy Symposium-1956, Dispersed Hard Particle Strengthening of Metals |
Grant, N. J. – Preston, O. |
| Cominto's New Sinter Plant |
Mitchell, E. A. – Melvin, J. F. – BainBridge, R. |
| Comparison of Blast Furnace Penetration with Model Studies |
Wagstaff, J. B. – Holman, W. H. |
| Differential High-Temperature Sulfatization of Cuyuna Manganese Ore |
Prasky, C. |
| X-Ray Microscopy of As-Grown and Deformed Single Crystals of Aluminum |
Auld, J. H. – Coyle, R. A. – Marshall, A. M. – McKinnon, N. A. |
| Title Page |
|
| Contents |
|
| Blast Furnace Coke Tested at High Temperature |
Holowaty, M. O. – Squarcy, C. M. |
| An Evaluation of Cast Refractory Hot Top Linings |
Tatousek, R. J. – Peters, A. T. |
| The H-Iron Process |
Squires, A. M. – Johnson, C. A. |
| Method Used During Forced Interruptions in Open Hearth Operations |
Ferris, G. A. |
| Ironmaking in the USSR |
Voice, E. W. – Klemantaski, S. |
| Hydrogen in Steelmaking Practice |
Epstein, H. – Chipman, J. – Grant, N. J. |
| Selective Sulfation for Cadmium Recovery at Josephtown Smelter |
Lund, R. E. – Warnes, D. E. |
| Remeasurement of Liquidus Temperatures of Mg-Ba Alloys |
Anderko, K. P. |
| Journal of Metals, April 1957, Vol. 9, No.4 - Index Section |
|
| Contents |
|
| Electron Probe Microanalyzer and Its Application to Ferrous Metallurgy |
Castaing, R. – Philibert, J. – Cruaard, C. |
| Oxidation of Zirconium Between 400 and 800C |
Gulbransen, E. A. – Andrew, K. F. |
| Prot Fatigue Study of an Aircraft Steel in the Ultra High Strength Range |
Ramsey, P. W. – Kedzie, D. P. |
| Effect of Dissolved Oxygen on the Grain Size of Annealed Pure Copper and Cu-AI Alloys |
Wood, D. L. |
| Some Properties of Certain High-Conductivity Copper-Base Alloys |
Hodge, W. |
| Habit Planes of Martensite in Chrome-Carbon Steel |
Otte, H. M. – Read, T. A. |
| Effects of Solid Solution Alloying on Creep Deformation of Aluminum |
Gemmell, G. D. – Grant, N. J. |
| Stepped Austenitizing Treatment for 4340 Steel |
Klier, E. P. – Weiss, V. – Sachs, G. |
| Central Region of the Mg-Zn Phase Diagram |
Clark, J. B. – Rhines, F. N. |
| Electron Diffraction Study of Flake Graphite Extracted from Molten Pig Iron |
Niwa, K. – Shimaoka, G. |
| Some Estimates of the Thermal Stability of Dispersion-Hardened Alloys |
Cochardt, A. W. |
| Grain Growth of Titanium Carbide in Nickel |
Skolnick, L. P. |
| Strength of Silver Brazed Joints in Mild Steel |
Moffatt, W. G. – Wulff, J. |
| Flaking of Heavy Alloy Steel Sections |
Garr, C. R. – Troiano, A. R. |
| Nucleation of Dislocation Loops by Cracks in Crystals |
Gilman, J. J. |
| Strain Induced Transformation in Beta Brass |
Massalski, T. B. – Barrett, C. S. |
| High-Strength Zirconium Alloy: Zr-4 Wt Pct Sn-1.6 Wt Pct Mo |
Chubb, W. |
| Effect of Small Amounts of Alloying Elements on the Ductility of Cast Molybdenum |
Olds, L. E. – Rengstorff, G. W. P. |
| Structural Changes Associated with Strain-Induced Grain Boundary Migration in Si-Fe |
Aust, K. T. – Dunn, C. G. |
| Zone Purification of Reactive Metals |
Smith, R. L. – Rutherford, J. L. |
| Compounds in the Titanium-Rich Region of the Ti-AI System |
Ence, E. – Margolin, H. |
| Crack Propagation in the Hydrogen-Induced Brittle Fracture of Steel |
Barnett, W. J. – Troiano, A. R. |
| Cleavage Steps and the Cleavage Plane in Chemically Embrittled Cu3Au Single Crystals |
Bakish, R. |
| Deformation of Magnesium Single Crystals by Nonbasal Slip |
Reed-Hill, R. E. – Robertson, W. D. |
| Effect of Temperature on the Flow Stress and Strain-Hardening Coefficient of Magnesium Single Crystals |
Conrad, H. – Robertson, W. D. |
| Comparison of the Strength of Sintered Carbides |
Gurland, J. |
| Action of Vibration on Solidifying Aluminum Alloys |
Southgate, P. D. |
| Discussion – Institute of Metals Division |
|
| Title Page |
|
| Contents |
|
| The 1957 Nuclear Congress |
|
| Blast Furnace USA |
|
| Government-Sponsored Metallurgical Research: |
McKenzie, Lawson M. |
| Howe Memorial Lecture: Some Observations on Ferrite-Carbide Aggregates in Alloy Steels |
Davenport, E. S. |
| Thermodynamic Properties of CS and Solutions of Sulfur in Carbon-Saturated Liquid Iron |
Fincham, C. J. B. – Bergman, R. A. |
| Effect of Oxygen Input Rates in the Decarburization of Chromium Steel |
Healy, G. W. – Hilty, D. C. |
| Peritectoid Transformation in Ag-AI Alloys |
Spencer, C. W. – Knight, R. J. – Rhines, F. N. |
| Effect of Strain and Temperature on the Yielding of Copper and Nickel |
Frye, J. H. Jr. – Scott, J. L. – Woods, J. W. |
| Title Page |
|
| Contents |
|
| Hydrometallurgy 1957 |
Poole, H. G. |
| Atmospheric vs. Pressure Leaching of Uranium Ores |
Beverly, R. G. – Griffith, A. W. – Millsap, W. A. |
| Ammonium Carbonate Pressure Leaching of Uranium Ores |
Langston, B. G. – Macdonald, R. D. – Stephens, F. M. Jr. |
| Uranium Recovery by the Solvent Extraction Process |
Moore, J. D. |
| Manganese from Low-Grade Ores by the Ammonium Carbamate Process |
Welsh, J. Y. – Peterson, D. W. |
| New Horizons for Lithium |
Landolt, P. E. |
| Diffusion of Calcium and Silicon in a Lime-Alumina-Silica Slag |
Towers, H. – Chipman, J. |
| Some Notes on Oroya Copper Slags |
Barker, I. L. – Jacobi, J. S. – Wadia, B. H. |
| Preparation and Properties of Boron-Treated Nonaging Open Hearth Steel |
Morgan, E. R. – Shyne, J. C. |
| Reduction of Nickel by Hydrogen from Ammoniacal Nickel Sulfate Solutions |
Mackiw, V. N. – Lin, W. C. – Kunda, W. |
| Dissolution of Lead Sulfide Ores in Acid Chlorine Solutions |
Sherman, M. I. – Strickland, J. D. H. |
| Bismuth in Copper Grain Boundaries |
Spencer, C. W. – Rummel, R. A. – Rhines, F. N. |
| Title Page |
|
| Contents |
|
| Blast Furnace U. S. A. |
Holowaty, M. O. – Squarcy, C. M. |
| The Cleveland High-Temperature Materials Conference: A Technical Summary |
|
| The Los Angeles Reactive Metals Conference: A Technical Summary |
|
| Swedish Oxygen Steelmaking |
Johansson, F. |
| Arc Melting of Reactive Metals |
Ham, J. L. – Sibley, C. B. |
| Thermodynamics of the Cu-Fe-S System at Matte Smelting Temperatures |
Krivsky, W. A. – Schuhmann, R. Jr. |
| Micrographic Study of Sulfide Roasting |
Thornhill, P. G. – Pidgeon, L. M. |
| Zone Refining of Bismuth |
Wernick, J. H. – Benson, K. E. – Dorsi, D. |
| Contents |
|
| Effects of Compression and Annealing on the Structure and Electrical Properties of Germanium |
Greiner, E. S. – Breidt, P. Jr. – Hobstetter, N. – Ellis, W. C. |
| Calculation of Diffusion Coefficients by the Matano-Boltzmann Method |
Baroody, E. M. |
| Some Aspects of Alloying Onto Germanium Surfaces |
Peterson, J. W. – McGlasson, J. Jr. – Hittinger, W. C. |
| Further Contribution to the Crystallographic Angles for Bismuth and Antimony |
Vickers, W. |
| On A Mechanism of High Temperature Intercrystalline Cracking |
Chen, C. W. – Machlin, E. S. |
| Cube Texture in Copper |
Liu, Y. C. |
| Grain Growth in Dilute Alloys of Copper |
Weinig, S. – Machlin, E. S. |
| Concerning an Order-Disorder Transition in the Ni-Cr System |
Roberts, B. W. – Swalin, R. A. |
| Preferred Growth Direction of Metals |
Tiller, W. A. |
| Nucleation Sites of Bainitic Carbides in Alloy Steels |
Kaufman, S. M. – Pound, G. M. – Aaranson, H. I. |
| Tensile Properties of Zone Refined Iron in the Temperature Range from 298 to 4.2K |
Smith, R. L. – Rutherford, J. L. |
| Aging in Complex Commercial Ni-Cr Alloys Hardened with Titanium and Aluminum |
Wilde, R. F. – Grant, N. J. |
| X-Ray Diffraction Study of the Sigma Phase in the Systems Re-Cr, Ru-Cr, and Os-Cr |
Waterstrat, R. M. – Kasper, J. S. |
| Diffusion in Gold and Au-Ag Alloys |
Mead, H. W. – Birchenall, C. E. |
| Constitution of Delta-Phase Alloys of the System U-Zr-Ti |
Saller, H. A. – Rough, F. A. – Bauer, A. A. – Doig, J. R. |
| Preparation of Alpha Uranium Single Crystals by a Grain-Coarsening Method |
Fisher, E. S. |
| Elevated Temperature Phase Relationships in the Cr-Ni-Mn-N System |
Whittenberger, E. J. – Rosenow, E. R. – Carney, D. J. |
| Electrical Resistivities and Phase Transformations of Lanthanum, Cerium, Praseodymium, and Neodymium |
Spedding, F. H. – Daane, A. H. – Herrmann, K. W. |
| Temperature Dependence of the Hardness of Secondary Phases Common in Turbine Bucket Alloys |
Westbrook, J. H. |
| Shear Along Grain Boundaries in Aluminum Bicrystals |
Tung, S. K. – Maddin, R. |
| Intermetallic Compounds in Titanium-Hardened Alloys |
Beattie, H. J. Jr. – Hagel, W. C. |
| Hydrogen Distribution in Heat-Treated Titanium as Established by Autoradiography |
Huber, O. J. – Gates, J. E. – Young, A. P. – Pobereskin, M. – Frost, P. D. |
| Blister Formation in Rolled Aluminum |
O’Dette, J. H. |
| Abrupt Yielding and the Ductile-to-Brittle Transition in Body-Centered-Cubic Metals |
Wessel, E. T. |
| Diffusion of Magnesium, Silicon, and Molybdenum in Nickel |
Swalin, R. A. – Martin, A. – Olson, R. |
| Determination of Orientation in Magnesium by Polarized Light Examination |
Couling, S. L. – Pearsall, G. W. |
| Title Page |
|
| Contents |
|
| Engineering Enrollment Report |
|
| Making Better Steel Sheet: How Metal Behaves During Cold Rolling |
Rogers, H. C. |
| Seamless Tube Plant Opens in Canada |
|
| Nucleonic Radiation Gage Control |
|
| Functional Testing of Cold Reduction Lubricants |
Griffin, J. F. |
| Unionarc Process Features Magnetically Coated Rod |
|
| Continuous Casting: Review and Outlook |
Easton, R. |
| Continuous Casting Research in the USSR |
|
| Continuous Casting at Atlas Steels Ltd. |
Barnhardt, L. F. – Stock, G. E. – Porter, W. U. |
| Economics of Continuous Casting in a Converter Steel Plant |
Savage, J. – Morton, J. S. |
| Continuous Casting of Three Types of Low Carbon Steel |
Jaicks, F. G. – Kraay, L. E. – Tenenbaum, M. |
| Sigma Phases Containing Osmium and Iridium |
Nevitt, M. V. – Downey, J. W. |
| Title Page |
|
| Contents |
|
| The Gaspe Smelter |
McKerrow, G. C. |
| The El Paso Smelter |
Woodside, T. J. – Roberts, B. |
| The San Manuel Smelter |
Wilson, R. C. |
| Cominco's Zinc Smelting and Casting Facilities |
Nicholson, J. H. |
| Continuous Steel Casting in France |
Fievet, R. |
| Notes on Continuous Casting in Germany and Belgium |
|
| An Efficient Method of Desulfurizing Liquid Pig Iron |
Trentini, B. – Wahl, L. – Allard, M. |
| Synthesis of Some Ferrites |
Kedesdy, H. – Tauber, A. |
| Title Page |
|
| Contents |
|
| Fundamentals of Scale Model Experiments |
Philbrook, W. O. |
| Design of Pyrometallurgical Pilot Plants |
Buehl, R. C. |
| The Paris Sintering Conference: A Summary |
Astier, J. |
| European Metallurgical Research-Fundamental to the Coal and Steel Community |
Starratt, F. W. |
| Blast Furnace U.S.A. |
Holowaty, M. O. – Squarcy, C. M. |
| Electrolytic Preparation of Thorium Metal |
Raynes, R. C. – Bleiweiss, J. C. – Sibert, M. E. – Steinberg, M. A. |
| Asarco's New Electrolytic Plant at Corpus Christi, Texas |
Jephson, A. C. – Allen, R. E. |
| Dissolution of Pyrite Ores in Acid Chlorine Solutions |
Sherman, M. I. – Strickland, J. D. H. |
| On Complex Formation in the System Na3AIF6-AI2O3 |
Forland, T. |
| Mass Spectrometric Examination of Anode Gases from Aluminum Reduction Cells |
Henry, J. L. – Holliday, R. D. |
| Contents |
|
| Tensile Deformation of Aluminum as a Function of Temperature, Strain Rate, and Grain Size |
Carreker, R. P. Jr. – Hibbard, W. R. Jr. |
| Cross-Rolling and Annealing Textures In High-Purity Iron |
Hu, H. |
| Effects of Crystal Orientation, Temperature, and Molten Zone Thickness in Temperature-Gradient Zone-Melting |
Wernick, J. H. |
| Formation of Intermetallic Layers in Diffusion Couples |
Castleman L. S. – Seigle, L. L. |
| Preparation and Diffraction Data of Ba-AI Alloys |
Dos, D. K. – Pitman, Douglas, T. |
| Stability of AISI Alloy Steels |
Wilder, A. B. – Ketterer, E. F. – Collyer, D. B. |
| Creep of AI-Cu Alloys During Age Hardening |
Underwood, E. E. |
| Investigation of the Nickel-Rich Portion of the System Ni-Zr |
Smith, E. – Guard, R. W. |
| Transformation Kinetics and Mechanical Properties of Zr-Mo Alloys |
Domagala, R. F. – Levinson, D. W. – McPherson, D. J. |
| Copper-Silica and Copper-Alumina Alloys of High Temperature Interest |
Zwilsky, K. M. – Grant, N. J. |
| Some Characteristics of the Martensite Tranformation of Cu-AL-Ni Alloys |
Chen, C. W. |
| Approximate Method of Calculations Using Concentration-Dependent Diffusion Coefficients |
Guy, A. G. – Golomb, M. – Yue, A. S. |
| Diffusion of the Elements of the IB and IIB Subgroups in Silver |
Sawatzky, A. – Jaumot, F. E. Jr. |
| Investigation of Grain Boundary Phase in Stainless Steel |
Clark, C. C. – Mihalism, J. R. – Carroll, K. G. |
| Elastic Properties of Yttrium and Eleven of the Rare Earth Elements |
Smith, J. F. – Carlson, C. E. – Spedding, F. H. |
| Mechanism of Precipitation in a Cu-2.5 Pct Fe Alloy |
Newkirk, J. B. |
| Some Observations on 885F Embrittlement |
Tisinai, G. F. – Samans, C. H. |
| Phase Transformation in Hypoeutectoid Ti-Cr Alloys |
Aaronson, H. I. – Triplett, W. B. – Andes, G. M. |
| The Uranium-Silicon Epsilon Phase |
S. Isserow |
| Misfit Strain Energy in the Au-Cu System |
Hultgren, R. |
| Temperature Dependence of the Tensile Properties of Vanadium |
Pugh, J. W. |
| Sand Cast Magnesium-Rare Earth Metal-Zirconium Alloys |
Leontis, T. E. – Feisel, D. H. |
| Grain Boundary Deformation in Fine-Grained Electrolytic Magnesium |
Couling, S. L. – Roberts, C. S. |
| The Nature of the Nickel-Chromium System |
Williams, R. O. |
| The Effect of Heat Treatment on the Hardness and Microstructure Of Uranium-Titanium Alloys |
Douglass, D. L. – Marsh, L. L. Jr. |
| Growth of Iron Alloy Single Crystals From the Melt |
Hall, R. C. |
| CsCL-Type Ordered Structures in Binary Alloys of Transition Elements |
Philip, T. V. – Beck, Paul A. |
| The Notch Tensile Properties of Selected Titanium Alloys |
Klier, E. P. – Feola, N. J. |
| Cylindrical Carbide Particles |
Westbrook, J. H. |
| The Distribution of Boron in Gamma Iron Grains |
Goldhoff, R. M. – Speiser, R. – Spretnak, J. W. |
| Crystallographic Angles for Manganese Bismuthide |
Romanow, W. J. |
| Some Internal Friction Studies in Columbium |
Powers, R. W. – Doyle, M. V. |
| Discussion-Iron & Steel Division |
|
| Discussion-Extractive Metallurgy Division |
|
| Discussion-Institute of Metals Division |
|
| Title Page |
|
| Contents |
|
| Germany's Ruhr |
|
| The August Thyssen Hutte |
|
| Low-Shaft Blast Furnace Holds New Promise |
|
| Rotor Steelmaking Process |
Graef, R. – Dick, W. – Von Bogdandy, L. |
| Sweden: Iron Powder to Rolled Steel in One Operation |
Kalling, B. – Eketorp, S. – Backstrom, S. |
| Preparation of Uranium Metal by Fused Salt Electrolysis |
Meister, G. – Lilliendahl, W. C. |
| Electrical Conductivity of Fused Sodium Chloride-Calcium Chloride Mixtures |
Story, J. B. – J. T. Clarke |
| Conductivity and Sulfur Activity in Liquid Copper Sulfide |
Bourgon, M. – Derge, G. – Pound, G. M. |
| Vacuum Dezincing of Parkes' Process Zinc Crusts |
Leferrer, V. F. |
| Electrical Conductivity of TbO-B2O3 Melts |
Phelps, W. C. Jr. – Grace, R. E. |
| Title Page |
|
| Contents |
|
| Vacuum Melting in the Steel Industry Today |
Dyrkocz, W. W. |
| Ladle Slag-Refining of Electric Furnace Steel |
Perrin, Rene |
| Cast and Rammed Arc-Furnace Roofs |
McCullough, J. D. |
| Analysis of Arc Furnace Control |
Kogen, J. H. |
| Raw Materials for the American Iron and Steel Industry |
Harris, J. C. O. |
| An Oxygen Steelmaking Process |
Luerssen, F. W. – Halley, J. W. – Tenenbaum, M. |
| Origin and Elimination of Hydrogen in Basic Open-Hearth Steels |
Kerlie, W. L. – Richards, J. H. |