Volume 230
The Metallurgical Society of AIME: Institue of Metals Division, Iron and Steel Division and Extractive Metallurgy Division 1964
Title Page
Foreword by Jack H. Scaff, President
Contents

Division Lectures
TITLE AUTHOR
The 1964 Extractive Metallurgy Lecture; Carbothermic Smelting of
Aluminum
P. T. Stroup
The 1964 Institute of Metals Lecture; On the Possible Impact of Quantum
Mechanics on Physical Metallurgy
Jacques Friedel
The Forty-first Henry Marion Howe Memorial Lecture; The Climate of
Extractive Metallurgy in the 1960’s
F. D. Richardson

Iron and Steel Division

TITLE AUTHOR
Decarburization in Iron-Carbon System by Oxygen Top Blowing K. Li, D. A. Dukelow, and G. C. Smith
Experimental Study of Equilibria in the System FeO-Fe2O3-Cr2O3 at 1300° Takashi Katsura and Avnulf Muan
Effect of Cr2O3 on Melting Relations of Iron Oxide at Low Oxygen Pressures P. V. Riboud and Avnulf Muan
Evaluation of Methods for Determining Hydrogen in Steel J. F. Martin, R. C. Takacs, R. Rapp, and L. M. Melnick
Reduction Kinetics of Hematite and the Influence of Gaseous Diffusion N. A. Warner
Miscibility Gap in the CaO-SiO2-Cr2O3 System at 1600°C (TN) J. H. Swislzer and C. L. McCabe
Thermodynamic Properties of Solid Solutions with Spinel-Type Structure. I, The System Co3O4-Mn3O4 Egil Aukrust and Avnulf Muan
Kinetics of Reaction of Gaseous Nitrogen with Iron Part I: Kinetics of Nitrogen Solution in Gamma Iron P. Grieveson and E. T. Turkdogan
The Chromium Oxide-Silica System at Low Oxygen Pressures G. W. Healy and J. C. Schottmiller
Density of Lime-Iron Oxide-Silica Melts John Henderson
The Theory of Enhancement of Diffusion - Limited Vaporization Rates by a Convection-Condensation Process. Part I - Theoretical E. T. Turkdogan
The Theory of Enhancement of Diffusion-Limited Vaporization Rates by a Convection-Condensation Process. Part II- Experimental E. T. Turkdogan and K. C. Mills
A Determination of Activity Coefficients of Sulfur in Some Iron-Rich Iron-Silicon-Sulfur Alloys at 1200°C Thomas R. Mager
Surface Tensions and Surface Adsorptions in Liquid Iron- Carbon Alloys: the Systems Fe-C-Ni and Fe-C-Co S. M. Kaufman and T. J. Whalen
The Activity and Solubility of Oxygen in Liquid Iron, Nickel, and Cobalt E. S. Tankins, N. A. Gokcen and G. R. Belton
Kinetics of Dissolution of Ferric Oxide Kiyoshi Azuma and Hiroshi Kametani
The Solubility of Calcium in Liquid Iron and Third-Element Interaction Effects D. L. Sponseller and R. A. Flinn
Discussion: The Analysis and Solubility of Nitrogen in Silicon- Iron A. U. Seybolt
Effect of Hydrogen Content on Susceptibility to Flaking J. M. Hodge, M. A. Orehoski and J. E. Steiner
Grain-Growth Restriction in Two-Phase Microstructures (TN) L. H. Van Vlack and G. I. Madden
Liquid Miscibility Gap in Iron-Tin System (TN) K. C. Mills and E. T. Turkdogan
The Climate of Extractive Metallurgy in the 1960's-The 1964 Howe Memorial Lecture F. D. Richardson
Kinetics of Decarburization of Liquid Iron in an Oxidizing Atmosphere Using the Levitation Technique L. A. Baker, N. A. Warner and A. E. Jenkins
Thermodynamic Properties of Solid Solutions with Spinel- Type Structure: II. The System CO3O4-Fe3O4 at 1200°C Egil Aukrust and Avnulf Muan
The Influence of Carbon on the Activity Coefficient of Silicon in Liquid Iron-Carbon-Silicon David Schroeder and John Chipman
Kinetics of Oxidation and Reduction of Molten Iron Oxide P. Grieveson and E. T. Turkdogan
The Aluminum-Nitrogen Equilibrium in Liquid Iron Donald B. Evans and Robert D. Pehlke
The Boron-Nitrogen Equilibrium in Liquid Iron Donald B. Evans and Robert D. Pehlke
Cr2O3 as a Foaming Agent in CaO-SiO2 Slags J. H. Swisher and C. L. McCabe

Extractive Metallurgy Division

TITLE AUTHOR
Precipitation of Thorium from Thorium-Magnesium by Liquid Lithium L. A. Hanson
Preparation of High-Purity Tellurium P. P. Napolitano and Charles L. Mantell
The Heats of Mixing of Molten Lead-Zinc Alloys at 900°C (TN) D. D. Todd and W. A. Oates
Carbothermic Smelting of Aluminum-The 1964 Extractive Metallurgy Lecture P. T. Stroup
Heats of Solution of the Group III Elements Aluminum, Gallium, and Indium in Liquid Tin at 750°K (TN) M. J. Pool and C. E. Lundin
Sulfur Pressure Variation of Molybdenum Disulfide at 1100°C (TN) S. C. Schaeker, A. H. Larson and A. W. Schlechten
The Activity of Nickel in Liquid Lead-Nickel Alloys (700° to 1100°C) Charles R. Cavanaugh and John F. Elliott
High Temperature Heats of Mixing for the Liquid Copper- Tin System and the Liquid Copper-Nickel System M. G. Benz and J. F. Elliott
The Theory of Enhancement of Diffusion-Limited Vaporization Rates by a Convection-Condensation Process. Part I -Theoretical E. T. Turkdogan
The Theory of Enhancement of Diffusion-Limited Vaporization Rates by a Convection-Condensation Process. Part II-Experimental E. T. Turkdogan and K. C. Mills
Kinetics of Dissolution of Ferric Oxide Kiyoshi Azuma and Hiroshi Kametani
A Thermodynamic Study of the Zirconium-Sulfur System in the Region ZrS1.49 to ZrS2.00 A. H. Larson and A. W. Schlechten
Recent Changes in Electrolytic zinc Production at Risdon, Tasmania J. H. Bain, D. C. Haigh and L. C. Parsons
Sulfate Formation During the Roasting of Lead Sulfide J. R. Tuffley and B. Russell
The Kinetics of Hydrogen Reduction of Chromic Oxide Kurt Straler and Charles L. Mantell
High-Temperature Stability of Tungsten Oxide Structures (TN) Bert Phillips and Luke L. Y. Chang
Magnesium-Tin Phase Diagram and Thermodynamic Properties of Liquid Magnesium-Tin Alloys E. Miller, A. Steiner, and K. L. Komarek
On the Thermodynamic Properties of the Compounds Sb2Se3, Bi2Se3, Sb2Te3, and Bi2Te3 B. W. Howlett, Somnath Misra, and M. B. Bever
Infrared Evidence for Bisulfate Formation in the Dehydration of Magnesium Sulfate J. S. Cho, F. A. Olson and M. E. Wadworth
Calciothermic Reduction of Niobium (Columbium) Pentoxide C. K. Gupta and P. K. Jena
Intrepretation of Vacuum Gas Test Results for Aluminum Alloys K. J. Brondyke and P. D. Hess
Filtering and Fluxing Processes for Aluminum Alloys K. J. Brondyke and P. D. Hess
Resistivity of Liquid Cadmium-Antimony Alloys E. Miller, J. Paces and K. L. Komarek
A Critical Review of Sulfation Equilibria H. H. Kellogg
A Thermodynamic Analysis of the Ta-C-O, Cb-C-O, and V-C-O Systems Wayne L. Worrell and John Chipman
A Study of the Sulfation of a Concentrate Containing Iron, Nickel, and Copper Sulfides A. W. Fletcher and M. Shelef
A Comparison Between Measured and Calculated Activity Coefficients in Multicomponent Lead-Base Liquid Alloys Containing Cadmium (TN) Kazuhisa Okajima and Robert D. Pehlke

Institute of Metals Division

TITLE AUTHOR
The Constitution Diagram Tungsten-Ruthenium E. J. Rapperport and M. F. Smith
Microstructural Changes During Deformation of [011] Fiber-Textured Metals W. F. Hosford, Jr.
Diffusion of Oxygen and Nitrogen between Special Interstitial Sites in Solid Solution in Ytterbium George Mah and Charles Wert
Some Effects of Temperature and Hydrostatic Pressure on Interfacial Tensions in the Nickel-Lead System Charles A. Stickels and Edward E. Hicke
Tensile Behavior of Copper Foils Prepared from Rolled Material A. Lawley S. Schuster
Oxidation Kinetics of Tantalum in Carbon Dioxide K. J. Richards and M. E. Wadsworth
Lamellar Tilt Boundary of Mg-32 Wt Pct Al Eutectic A. S. Yue
Self-Diffusion of Silver in Beta-AgMg H. A. Domian and H. I. Aaronson
The Applicability of AISI C- 1213 Free-Machining .Steel to Complex Fatigue- Shock- Wear Load G. Koves
Effects of Sintering on the Physical and Mechanical Properties of Arc Plasma-Sprayed Tungsten W. A. Spitzig and G. W. Form
Grain Boundary Grooving in the Presence of a Liquid C. A. Steidel, Che-Yu Li, and C. W. Spencer
Hydrogen in Proton-Bombarded Beryllium: Agglomeration and Diffusion J. P. Pemsler and E. J. Rapperport
The Effectiveness of Inclusions in Promoting the Secondary
Recrystallization of Silicon-Iron
H. C. Fiedler
Homogenization Kinetics of a Sintered Columbium Alloy S. Leber and R. F. Hehemann
The Constitution Diagram Tantalum-Rhodium Bill C. Giessen, Hanna Ibach,
and Nicholas J. Grant
Surface Diffusion of Gold and Copper on Copper Jei Y. Choi and P. G. Shewmon
Statistical Model for Nonsubstitutional Solutions: a) Interstitial Solutions, b) Deviation from Stoichiometry in Inorganic Compounds M. Hoch
Low-Temperature Lattice Parameters of Thorium-Cerium Alloys James T. Waber, I. Rex Harris
and G. V. Raymor
A Thin- Foil Transmission Electron-Microscopic Study of Neutron-
Irradiated A212B Steel
A. J. Birkle and W. Rall
The Oxidation of Hastelloy Alloy X S. T. Wlodek
The System Tantalum-Titanium- Zirconium-Oxygen at 1500°C Michael Hoch and Daniel B. Butrymowicz
Nucleation Rates in the Alpha to Beta Transformation of Tin C. G. Durdaller, W. H. Robinson,
and G. M. Pound
Influence of Modulus on the Temperature Dependence of the Activation Energy for Creep at High Temperatures Craig R. Barrett, Alan J. Ardell, and Oleg D. Sherby
Recrystallization of High-Purity Iron A. Rosen, M. S. Burton, and G.
V. Smith
An Internal Friction Study of Low -Carbon Iron-Nickel-Carbon Alloys J. K. Jackson and P. G. Winchell
Carbon Diffusion in Dilute Ternary Austenites L. C. Brown and J. S. Kirkaldy
Thermodynamic Properties of Solid Iron-Aluminum Alloys J. Eldridge and K. L. Komarek
Field-Emission Microscopy of Metal Crystal Nucleation K. L. Moazed and G. M. Pound
The Association of Hcp and Bcc Structures in the Martensite
Transformation (TN)
A. J. Goldman, W. D. Robertson
and D. A. Koss
The Effect of Lüders Straining on the Tensile Flow Behavior of Arc-Cast Molybdenum Sheet (TN) J. L .Lytton and T. E. Tietz
Comments on the Theory of Continuous Zone-Melting (TN) John K. Kennedy
The Anisotropy of Thermal Expansion in Zinc (TN) Jack Medoff and Irving Cadoff
The Crystal Structure of ScCd3 (TN) R. V. Schablaske, B. S. Tani, and M. G. Chasanov
Some Comments on Strain-Gage Techniques for Determining Microstrain (TN) R. D. Carnahan and J. E. White
Mercury Embrittlement of an Al-4 ½ Pct Mg Alloy (TN) H. Nichols and W. Rostoker
New Phases in the Manganese-Silicon and Iron-Manganese- Silicon Systems (TN) K. P. Gupta
Preprecipitation in Gold-Nickel Alloys (TN) Ronald Gibala
Stress-Induced Martensite Transformation in Beta Titanium Alloys (TN) D. N. Williams, R. A. Wood, R. I. Jaffee, and H. R. Ogden
Morphology of Bainite in Hypoeutectoid Steels (TN) J. M. Oblak, r. H. Goodenow, and R. F. Hehemann
Prismatic Slip in Zone-Refined Beryllium (TN) E. D. Levine, D. F. Kaufman, and
L. R. Aronin
Blended Aluminum- Powder Products ( TN) E. D. Levine, D. F. Kaufman, and
L. R. Aronin
Strain Measurement on Wires at High Temperature (TN) A, T. Price, A. P. Greenough,
and H. A. Holl
A Cryogenic Stage for Optical Metallography (TN) L. L. Isaacs and Horace Pops
Lattice Parameters of the Alpha Phase in Copper-Silicon- Zinc Alloys (TN) Horace Pops
Indium Phosphide Laser Characteristics K. Weiser, R. S. Levitt, M. I. Nathan, G. Burns, and J.
Woodall
Preparation and Properties of Ga ( As1-x Px) p-n Junction Lasers Nick Holonyak, Jr.
Light Emission from GaAsxP1-x Diodes M. H. Pilkuhn and H. Rupprecht
Analysis of a GaAs Laser J. R. Biard, W. N. Carr, and B. S.
Reed
Diffusion in GaAs Leonard R. Weisberg
Diffusion Problems Related to GaAs Injection Lasers M. H. Pilkuhn and H. Rupprecht
Zinc Diffusion in GaAs through SiO2 Films Samuel R. Shortes, Jack A. Kanz, and E. C. Wurst, Jr.
The Diffusion of Zinc into Gallium Arsenide to Achieve Low Surface
Concentrations
H. Becke, D. Flatley, W. Kern, and D. Stolnitz
Phosphorus Nitride as a Diffusion Source for Silicon T. J. LaChapelle and H. B. Heller
A Simplified Method of Evaluating Various Piezoelectric Semiconductors for Use in an Ultrasonic Amplifier W. E. Newell
Preparation of Fine-Grained PbTe by Ultrasonic Agitation of a Solidifying Melt Martin Weinstein
Preparation and Electrical Properties of Silver Antimony Telluride R. A. Burmeister and D. A. Stevenson
Investigation of Alloys of the System PbTe-SnTe Alvin A. Machonis and Irving B. Cadoff
Rapid Freeze Method for Growth of Bismuth Single Crystals Sidney Fischler
Solid Solutions of CdTe and InTe in PbTe and SnTe. I: Crystal Chemistry Arthur J. Rosenberg, Robert Grierson, J. C. Woolley and P. Nikolic
The Preparation of High Purity Boron via the Iodide A. F. Armington, G. F. Dillon andR. F. Mitchell
Deformation Twinning in Hadfield Steel W. N. Roberts
Delayed Fracture by Cyclic Unload During Extension of Zinc L. B. Harris
Mechanical Properties and Superlattice Formation of Mg3Cd R. G. Davis and N. S. Stoloff
Recrystallization in Hot-Worked Silicon-Iron A. T. English and W. A. Backofen
Aqueous Corrosion of Zirconium Single Crystals A. E. Bibb and J. R. Fascia
Diffusion of Silver and Tin in Liquid Silver V. G. Leak and R. A. Swalin
Cold Work and the Ductile-Brittle Transition of Silver Chloride T. S. Liu, R. J. Stokes and C. H. Li
Ductile Fracture of Aluminum G. Y. Chin, W. F. Hosford, Jr., and W. A. Backofen
The Surface Diffusion of Germanium on Copper P. G. Shewmon and J. Y. Choi
Growth and Transformation Characteristics of Cobalt Whiskers M. A. Gedwill, C. J. Altstetter, and C. M. Wayman
The Intermittent Propagation of Brittle Fracture in Steel H. C. van Elst
The Osmium-Iridium Equilibrium Diagram R. D. Reiswig and J. M. Dickinson
Distribution of Lead between Phases in the Silver-Antimony-Tellurium System Robert A. Burmeister, Voyle R. McFarland and David A. Stevenson
The Diffusivity of Carbon in Gamma Iron-Cobalt Alloys R. P. Smith
The Effect of Nitrogen on the Brittle-Ductile Transition of Chromium K. E. Solie and O. N. Carlson
Interatomic Distances and Atomic Radii in Intermetallic Compounds of Transition Elements Clara B. Shoemaker and David P. Shoemaker
Tungsten Sheet Alloys with Improved Low-Temperature Ductility J. L. Ratliff, D. J. Maykuth, H. R. Ogden and R. I. Jaffee
Effects of Cold Working and Subsequent Heating on Strength at Elevated Temperatures of Aluminum Powder Metallurgy Products R. J. Towner
Comparison of Fatigue Mechanisms in Bcc Iron and Fcc Metals W. A. Wood, W. H. Reimann, and K. R. Sargant
The Effect of Stress on X-Ray Line Profiles R. I. Garrod and R. A. Coyle
Mechanical Properties of Several Nickel-Platinum Group Metal Alloys W. L. Phillips, Jr.
Some Observations of Grain Boundary Relaxation in Copper and Copper-2Pct Cobalt D. T. Peters, J. C. Bisseliches,and J. W. Spretnak
Hardenability of Titanium Alloys L. D. Jaffe, E. Cordon, and F. W. Cotter
Density Changes on Annealing Cold-Worked Molybdenum Harry W. Antes
Formation of and Recrystallization within {1012} Twin Bands in a Polycrystalline Magnesium Alloy D. J-P. Adenis and S. L. Couling
Recovery of Creep-Resistant Substructures Louis Raymond and John E.Dorn
The High-Temperature Allotropy of Some Heavy Rare-Earth Metals A. E. Miller and A. H. Duane
An Electron-Transmission Study of Rolled and Annealed Silicon-Iron Crystals with (111) [112] Orientation Hsun Hu
The Topography and Growth Mechanism of Silicon Over-growths A. G. Revesz and R. J. Evans
On the Strength of Silver-Base Solutions (TN) G. E. Tardiff and A. A. Hendrickson
Secondary Recrystallization to the (100) [001] or (110) [001] Texture in 3 ¼ Pct Silicon-Iron Rolled from Sintered Compacts (TN) Jean Howard
Metallographic and Differential Thermal Analyses of the Purity of Cerium (TN) D. E. Etter and J. E. Selle
Age Hardening of Haynes Alloy No. 25 Determined by Elevated-Temperature Hardness Testing (TN) George Hallerman and R. J. Gray
Gas Permeation Through Fused-Silica Capsules During High- Temperature Heat Treatments (TN) F. J. Norton and A. U. Seybolt
A General Method for Calculating Electron-Diffraction Patterns Containing Twin Reflections in Isometric Crystals ( TN) O. Johari and G. Thomas
Solute Distribution and Eutectic Formation in As-Cast Nickel-Base Superalloys (TN) Roger A. Gregg and Barry J. Piearcey
Phase Transitions in the System Tungsten-Carbon (TN) George W. Orton
Abnormal Thermal Etching Behavior in a Copper-Silicon Alloy (TN) M. B. Kasen and D. H. Polonis
Requirements for Developing Cube-on-Edge Texture in 4- Mil-Thick Silicon-Iron (TN) H. C. Fiedler
The Effect of Zone Refining on Stress-Strain Curves of Fcc Metals (TN) R. Schaefer, Y. Nakada, and B. Ramaswami
Plastic Deformation of Oriented Gold Crystals (TN) Y. Nakada, U. F. Kocks, and B. Chalrners
Damping Measurements on Single-Crystal Molybdenum (TN) Randolph H. Schnitzel
Analysis of the Variation of the Diffusion Constant of Carbon in Austenite with Concentration (TN) R. M. Asimow
Effect of Loading Duration on Indentation Hardness (TN) W. W. Walker and L. J. Demer
On the Possible Impact of Quantum Mechanics on Physical Metallurgy-The 1964 Institute of Metals Lecture Jacques Friedel
Self-Diffusion Studies of Delta Plutonium R. E. Tate and E. M. Cramer, Appendix by A. S. Goldoni
Plastic-Replica Methods Applied to a Study of Fatigue Crack Propagation in Steel 35 CD 4 and 26 St Aluminum Alloy R. C. de Lange
Latent Hardening and the Role of Oblique Slip in the Strain Hardening of Rock-Salt Structure Crystals T. H. Alden
Interpretation of Flow Mechanisms During Rolling in Fcc Metals Y. C. Liu
The Nature of the <001> Fiber-Texture Component in Extruded Aluminum Rods R. A. Vandermeer and C. J. McHargue
Effect of 500°C Aging on the Deformation Behavior of an Iron-Chromium Alloy M. J. Marcinkowski, R. M. Fisher,and A. Szirmae
Activation Energies for Diffusion in Pure Metals and Concentrated Binary Alloys Louis E. Toth and Alan W. Searcy
Diffusion in the Gold-Indium System C. W. Powell and J. D. Braun
Influence of Small Amounts of Nitrogen on Recovery and Recrystallization of High-Purity Iron C. Antonione, G. Della Gatta, and G. Venturello
Dislocations in Ruby Laser Crystals K. R. Janowski and H. Conrad
The Effects of Shock Waves on the Alloy Cu3Au P. Beardmore, A. H. Holtzman, and M. B. Bever
The Solubility of Oxygen in Silver and the Thermodynamics of Internal Oxidation of a Silver-Copper Alloy H. H. Podgurski and F. N. Davis
Thermodynamic Properties of Solid Vanadium-Chromium Alloys A. T. Aldred and K. M. Myles
Electrical Properties of Some Binary Terminal Solid Solutions of Silver D. D. Pollock
The Fatigue Properties of Supersaturated Aluminum (Copper) Alloys D. P. Kedzie and R. A. Dodd
The Determination of the Geometric Properties of Aggregates of Constant-Size Particles from Counting Measurements Made on Random Plane Sections R. T. DeHoff
The Role of Phase Relationships in the Activates Sintering of Tungsten A. L. Prill, H. W. Hayden and ZJ. H. Brophy
The Role of Coprecipitation in Alloy Partition During the Crystallization of Ternary Systems J. L. Moriarty, Irving Johnson, and H. M. Feder
A Study of Basal Slip Kink Bands in Polycrystalline Zirconium J. L. Martin and R. E. Reed-Hill
Thermodynamic Activities of Solid Nickel-Aluminum Alloys A. Steiner and K. L. Komarek
Measurement of Dihedral Angles Charles A. Stickels and Edward E. Hucke
Effect of Recovery on the Tensile Flow Behavior of Molybdenum J. L. Lytton and T. E. Tietz
Twin Intersections and Cahn's Continuity Conditions R. E. Reed-Hill
The Constitution of Copper-Rich Copper-Silicon-Zinc Alloys Horace Pops
Effect of Purification on Basal Cleavage in Beryllium Single Crystals E. D. Levine, D. F. Kaufman, and L. R. Aronin
The Hot Ductility of Nickel D. A. Kraai and S. Floreen
Intermediate State in the Ductile-Brittle Transition of Chromium W. A. Wood, R. I. Garrod, and H. L. Wain
Deformation Characteristics of an Iron-18 Pct Nickel Binary Alloy S. Floreen
An Investigation of the Lead Molybdate-Bismuth Molybdate Phase Diagram D. F. Howard, G. P. Bowman, R. K. Saxer, and J. R. Myers
A Volume-Fluctuation Model for Self-Diffusion in Crystalline Solids D. H. Feisel and R. W. Armstrong
Deformation of Germanium by Rolling M. S. Abrahams
The Diffusion of Carbon in Iron-Cobalt-Carbon Austenites A. S. Appleton
Grain Boundary and Substructure Hardening in Aluminum Frank Hultgren
Kinetics of Ordering and Domain Hardening in Fe3Al R. G. Davies
Recrystallization of Single Crystals of Aluminum D. C. Larson and Bruce Chalmers
Pyrometric Errors in High Temperature Furnaces R. D. Reiswig
Discussion: An Empirical Relation Defining the Stress Dependence of Minimum Creep Rate in Metals J. D. Meakin
Discussion: The Influence of Electromagnetic Stirring on the Nucleation of Tin and Tin-Lead Alloys Arthur G. Metcalfe
Discussion: On the Preprecipitation Process in Aluminum- Magnesium Alloys Klaus Detert and Ludwig Thomas
Discussion: Temperature Dependence of Steady-State Creep in a Dispersion-Strengthened Indium-Glass Composite G. Ansell and J. Weertman
Discussion: Dislocation-Tangle Formation James C. M. Li
Growth of High-Purity Copper Crystals (TN) E. M. Porbansky
Dislocation Sources at Inclusions in Zinc (TN) Victor V. Damiano and Norman Brown
Effect of Oxygen on the Impact Transition Properties of Wrought Tantalum and Columbium (TN) A. G. Imgram, E. S. Bartlett, and H. R. Ogden
Precipitation of AgCl in NaCl (AgC1) Solid Solutions (TN) R. W. Hendricks, R. Baro, and J. B. Newkirk
Dispersion-Strengthened Refractory Alloys (TN) R. C. Westgren and V. R. Thompson
Structures in Chromium-Nickel Alloys at High Temperature (TN) D. W. Bare, E. D. Gibson, and O. N. Carlson
Solubility of Nitrogen in Tantalum (TN) P. Bunn and C. Wert
Lattice-Parameter and Volumetric Data of the Iron-Vanadium System (TN) R. E. Hanneman and A. N. Mariano
The Lattice Parameter and Alpha Phase Boundary of Ferritic Iron- Zinc Alloys (TN) G. R. Speich, L. Zwell, and H. A. Wriedt
The Brittleness of Alpha Plutonium (TN) L. Ianniello
Size Effects in the Deformation of Aluminum Crystals Tested in Compression P. W. Kingman and Robert E. Green, Jr.
Dynamic Young's Modulus Measurements above 1000°C on Some Pure Polycrystalline Metals and Commercial Graphites Philip E. Armstrong and Harry L. Brown
Electron-Microscope Observations on Precipitation in a Cu-3.1 wt Pct Co Alloy V. A. Phillips
Effects of Alloying on Room-Temperature Tensile Properties of Tungsten-Fiber-Reinforced-Copper-Alloy Composites Donald W. Petrasek and John W. Weeton
Effect of the Surface on the Activation Energy and Activated Volume for Plastic Deformation of FCC Metals I. R. Kramer
The Plutonium-Cerium System J. E. Selle and D. E. Etter
Compression Testing of Fcc Crystals U. F. Kocks, Y. Nakada, and B. Ramaswami
Some Mechanical Properties of Austenitic Stainless-Steel Single Crystals G. Meyrick and H. W. Paxton
The Examination of Fcc Metals with Polarized Light R. E. Reed-Hill, C. R. Smeal, and Linda Lee
The Growth of Proeutectoid Ferrite in Ternary Iron-Carbon- Manganese Austenites G. R. Purdy , D. H. Weichert, and J. S. Kirkaldy
The Study of the Structural and Transformation Characteristics of the Pressure-Induced Polymorphs in Bismuth T. E. Davidson and A. P. Lee
Influence of the Mechanical Loading System on Low-Temperature Plastic Instability G. Y. Chin, W. F. Hosford, Jr., and W. A. Backofen
The Pressure-Temperature Diagram of Solid Thallium Philip N. Adler and Harold Margolin
Nucleation of Kink Pairs and the Peierls' Mechanism of Plastic Deformation John E. Dorn and Stanley Rajnak
The Rate-Controlling Mechanism of Slip in the Intermetallic Compound AgMg at Low Temperatures A. K. Mukherjee and John E. Dorn
Mechanism for Thermally Activated Prismatic Slip in Ag2-Al A. Rosen, J. D. Mote, and J. E. Dorn
The Thermal Expansion of Nb3Sn(Cb3Sn) H. W. Schadler, L. M. Osika, G.
P. Salvo, and Mrs. V. J. DeCarlo
The Oxidation of René 41 and Udimet 700 S. T. Wlodek
Particle Coarsening in a Copper-Silica Alloy Noboru Komatsu and Nicholas J. Grant
Tungsten Oxidation Kinetics at High Temperatures R. W. Bartlett
The Notch-Impact Behavior of Tungsten R. J. Stokes and C. H. Li
A Modified X-Ray Diffraction Microscope Technique for Study of
Dislocations in Crystals
J. S. Makris and C. H. Ma
The Effect of Precipitation on Fracture Path in a Mercury-Embrittled Cu-4 Pct Ag Alloy Ernest Levine and Irving B. Cadoff
Mercury-Induced Crack Formation and Propagation in Cu-4 Pct Ag Alloy Ernest Levine and Irving B. Cadoff
Investigation of Room-Temperature Slip in Zone-Melted Tungsten Single Crystals R. G. Garlick and H. B. Probst
The Temperature Dependence of the Microyield Points in Prestrained Magnesium Single Crystals J. M. Roberts and D. E. Hartman
The Movement of Small Inclusions in Solids by a Temperature Gradient Paul G. Shewmon
The Rate of Removal of Nitrogen from Low-Carbon Steel During Heat Treatment R. M. Hudson
The Effects of Carbon, Nitrogen, Oxygen, and Sulfur on the Ductile-Brittle Fracture Temperature of Chromium Raymond E. Cairns, Jr. and Nicholas J. Grant
Latent Hardening and Secondary Slip in Aluminum and Silver U. F. Kocks
Carbide-Strengthened Chromium Alloys C. T. Sims and J. W. Clark
Effect of Hydrogen Content on Susceptibility to Flaking J. M. Hodge, M. A. Orehoski and
J. E. Steiner
The Cerium-Copper System T. B. Rhinehammer, D. E. Etter, J. E. Selle and P. A. Tucker
Fatigue Behavior of Hydrogen-Charged Tantalum (TN) B. A. Wilcox
Hardness and Creep under Spherical Indentation (TN) H. D. Merchant
Some Metallurgical Factors that Affect Magnetic Aging of Silicon Steels (TN) Young Ku Yoon and Phillip A. Stoll
Factors Affecting the Strength of Iron-Rich Iron-Molybdenum-Boron Alloys A. P. Coldren, M. Semchyshen
and W. G. Scholz
The Niobium (Columbium)-Rhodium Binary System Part I: The
Constitution Diagram
D. L. Ritter, B. C. Giessen and N.
J. Grant
The Niobium (Columbium)-Rhodium Binary System Part II: Crystal Structure Relationships D. L. Ritter, B. C. Giessen and N. J. Grant
The Niobium (Columbium)-Iridium Constitution Diagram B. C. Giessen, R. Koch, and N. J. Grant
Effects of Specimen Dimensions on Easy Glide in Gold Y. Nakada, U. F. Kocks, and B. Chalmers
The Formation and Dissolution of Chromium Oxides in Chromium Rollin E. Hook and Attwell M. Adair
Wrought Alloys of the Tungsten-Tantalum-Molybdenum- Columbium System R. C. Westgren, A. Kasak, and E. J. Dulis
The Influence of Thermal Treatments upon the Microstructure and
Mechanical Properties of Aluminum-Aluminum Oxide Alloys
J. A. Dromsky and F. V. Lenel
Oxidation-Nitrification of Chromium at 1000°C A. U. Seybolt and D. H. Haman
A Microplasticity Study of Dispersion Strengthening in TD- Nickel J. E. White and R. D. Carnahan
Aluminum-Oxygen Clusters in Internally Oxidized Silver- Aluminum Alloys P. R. Swann, S. Weissmann and
D. F. Wriedt
The Solubility and Diffusivity of Oxygen in Silver and Copper from Internal- Oxidation Measurements Jan E. Verfurth and Robert A. Rapp
The Nb-Sn (Cb-Sn) System: Phase Diagram, Kinetics of Formation, and Superconducting Properties H. J. Levinstein and E. Buehler
Steady-State Creep Characteristics of Polycrystalline Copper in the Temperature Range 400° to 950°C Craig R. Barreft and Oleg D. Sherby
Room-Temperature Creep in Iron Under Tensile Stress and a Superposed Alternating Torsion W. H. Reimann and W. A. Wood
The Effects of Small Additions of Silver on the Aging of Some Aluminum Alloys I. J. Polmear
Effects of Surface Conditions on the Stress-Strain Curves of Aluminum and Gold Single Crystals Y. Nakada and B. Chalmers
Effect of Metallurgical Structure on the Tensile and Notch-Tensile
Properties of Molybdenum and Mo-0.5 Ti
A. G. Imgram, J. W. Spretnak,
and H. R. Ogden
The Segregation of Tantalum in Iron in a Levitating Zone Melter B. F. Oliver
The Surface Tension of Liquid Chromium and Manganese Benjamin C. Allen
Transmission Electron Microscopy of Three Recrystallized Al-Al2O3 SAP- Type Alloys R. S. Goodrich, Jr. and G. S. Ansell
Initiation and Propagation of Fatique Cracks in Tricrystals of Copper D. W. Hoeppner and F. H. Vitovec
Ultrasonic Attenuation Study of Dislocation Motion Part I. Theoretical Robert E. Green, Jr.
Ultrasonic Attenuation Study of Dislocation Motion Part II. Experimental Robert A. Swanson and Robert
E. Green, Jr.
Formation and Composition of Internal Oxides in Dilute Iron Alloys S. A. Bradford
Thermal-Beam Energy and Nucleation of Metal Crystals on Substrates S. J. Hruska and G. M. Pound
Texture Transition in Austenitic Stainless Steels Diffusion in Bcc Metals S. R. Goodman and Hsun Hu
Diffusion in Bcc Metals R. A. Wolfe and H. W. Paxton
Vapor Pressure of Liquid Indium C. C. Herrick
Fracture of Molybdenum Robert T. Ault
Creep and Grain Boundary Sliding in Aluminum-3 Pct Copper Alloy Y. Ishida, A. W. Mullendore and
N. J. Grant
Effect of Grain Size on the Creep Behavior of an Austenitic Iron-Base Alloy F. Garofalo, W. F. Domis, and F.
von Gemmingen
The Thermodynamics of Dilute Silver-Oxygen and Iron- Nitrogen Interstitial Solid Solutions Rex B. McLellan
The Growth of Single Crystals of Silver in the Presence of Finely Divided Alumina H. R. Peiffer and R. Geckle
Etching of Glide Dislocations in Aluminum (TN) G. L. Montgomery and G. B. Craig
The Crystallography and Morphology of Theta-Al3Fe Precipitates in Al + 0.5 Wt Pct Fe (TN) W. D. Donnelly and M. L. Rudee
An Investigation of the Yield-Point Phenomenon in Molybdenum (TN) G. W. King and J. W. Spretnak
Free Energies in the Iron-Nickel System (TN) J. H. Smith, H. W. Paxton, and C. L. McCabe
CeCd6-Type Rare Earth-Cadmium Alloys (TN) I. Johnson, R. Schablaske, B. Tani, and K. Anderson
The Heat of Formation of the Intermetallic Compound AgMg as a Function of Composition (TN) P. M. Robinson and M. B. Beaer
Metastable Solid Solutions in Aluminum-Magnesium Alloys (TN) H. L. Luo, C. C. Chao, and P. Duwez
Preparation and Properties of Niobium (columbium) Stannide on Insulating Substrates G. W. Cullen
Surface-Diffusion Measurements on Nickel Single Crystals J. J. Pye and J. B. Drew
The Application of Piezoelectric Semiconductors to the Fabrication of High-Frequency Ultrasonic Transducers N. F. Foster
A New Electron-zMicroscopic Technique for Studying Metal Surfaces Saara Asunmaa and N. A. Tiner
Orientation of Grains Growing into Strained Single Crystals of a Cu-1.0 At. Pct P Alloy Y. C. Liu
Substructure and Mechanical Properties of TD-Nickel M. von Heimendahl and G. Thomas
Growth Kinetics of Intermediate Silicides in the MoSi2/Mo and WS2/W Systems R. W. Bartlett, P. R. Gage, and P. A. Larssen
The Fatigue of Beryllium at Elevated Temperatures W. Vickers
Lamellar Growth: an Electric Analog K. A. Jackson, G. A. Chadwick, and A. Klugert
Extension of the Gamma Loop in the Iron-Silicon System by High Pressure Martin Schatz and Larry Kaufman
Development of a (110) Preferred Orientation in Rolled and Annealed High-Purity Tantalum C. G. Dunn and H. F. Webster
Effects of Strain Rate and Temperature on Yield Points R. J. Arsenault
The Effect of Stress on the Allotropic Transformation in Cobalt J. O. Nelson and C. J. Altstetter
Martensitic Transformations in Iron-Chromium-Nickel Alloys J. F. Breedis
Strain Hardening and Stress Dependency of Dislocation Velocity in Alpha-Iron Alloys with a Dispersed Phase F. Felberbauer, E. P. Lauten-schlager, and J. O. Brittain
Kinetics of Reaction of Gaseous Nitrogen with Iron Part II: Kinetics of Nitrogen Solution in Alpha and Delta Iron P. Grieveson and E. T. Turkdogan
The Strain-Rate Dependence of Yielding and Flow in Molybdenum R. Norman Orava
The Mechanical Interaction of Sapphire Whiskers with a Birefringent Matrix D. M. Schuster and E. Scala
The Material Transport Mechanism During Sintering of Copper-Powder Compacts at High Temperatures J. G. Early, F. V. Lenel, and G. S. Ansell
Thermoelastic and Burst-Type Martensites in Copper- Zinc Beta-Phase Alloys Horace Pops and T. B. Massalski
Phase Relationships in Manganese-Silicon Alloys Containing from 2 to 24 At. Pct Si P. F. Wieser and W. D. Forgeng
The System Chromium- Zirconium-Oxygen at 1200°, 1500°, and 1700°C Seong Kwan Rhee and Michael Hoch
Cyclic Strain and Fatigue Study of a 0.1 pct C-2.0 pct Mo Steel at Elevated Temperatures L. F. Coffin, Jr.
Strengthening of LiF Crystals by Magnesium-Diffused Surface Regions J. C. Bilello, R. Rosenberg, and I. B. Cadoff
Thermomechanical Treatments of the 18 Pct Ni Maraging Steels Eric B. Kula and Charles F. Hickey, Jr.
Stress-Induced Martensitic Transformations in 18Cr-8Ni Steel R. P. Reed and C. J. Guntner
The Magnetic Susceptibility of Some Equi-Atomic Lithium Alloys Y. L. Yao
Abnormal Effect of Small Cobalt Additions on the Recrystallization of Zone-Melted Iron (TN) G. J. London and M. Herman
The Crystal Structure of TaNi2 (TN) Bill C. Giessen and Nicholas J. Grant
Controlled Addition of Small Amounts of Oxygen to Niobium (Columbium) (TN) C. S. Tedmon, Jr., R. M. Rose, and J. Wulff
A Computer Analysis of Inverse Segregation (TN) J. R. Cahoon and W. V. Youdelis
The Selective Oxidation of Chromium in an Iron-Chromium- Nickel Alloy (TN) R. P. Abendroth
Secondary Recrystallization to (110) [001] by Impurity Inhibition in 1 -Mil Silicon-Iron Strip (TN) Jean Howard
Growing Large Single Crystals of Niobium (Columbium) by the Strain-Anneal Method (TN) T. G. Digges, Jr. and M. R. Achter

Corrections

TITLE AUTHOR
Corrections to Volume 227 / p. 239 / p. 580  
Corrections to Volume 230 / p. 580 / p. 1490 / p. 1724  

INDEX

TITLE AUTHOR
Index