Title
|
Author
|
Title Page |
|
Equilibrium Relations in Medium-alloy Steels |
Zener, Clarence |
Phase Boundaries in Medium-alloy Steels |
West, W. A. |
Kinetics of the Decomposition of Austenite |
Zener, Clarence |
The Hardenability Concept |
Hollomon, John H. and Jaffe, L. D. |
Hardenability and Quench Cracking |
Jaffe, L. D. and Hollomon, John H. |
A Test for Hydrogen Embrittlement and Its Application to 17 Per Cent Chromium, 1 Per Cent Carbon Stainless-steel Wire |
Zapffe, Carl A. and Haslem, Eleanor |
Physical Properties of Copper-manganese-zinc Alloys Containing 60 Per Cent Copper and 5 to 25 Per Cent Manganese |
Dean, R. S., Long, J. R., Graham, T. R. and Feustel, R. G. |
Susceptibility of Four Magnesium Casting Alloys to Microporosity and Its Effect on the Mechanical Properties |
Burns, Jay R. |
Preparation and Properties of DuctileTitanium |
Dean, R. S., Long, J. R., Wartman, F. S. and Anderson, E. L. |
Ductile Titanium – Its Fabrication and Physical Properties |
Dean, R. S., Long, J. R., Wartman, F. S. and Hayes, E. T. |
Constitution of Commercial Low-carbon Iron-silicon Alloys |
Rickett, R. L. and Fick, N. |
Vicalloy-A Workable Alloy for Permanent Magnets |
Nesbitt, E. A. |
The Solubility of Hydrogen in Molten Iron-silicon Alloys |
Liang, Hung, Bever, Michael B. and Floe, Carl F. |
Silicide-hardened Copper Compacts for Bearings* |
Hensel, F. R., Larsen, E. I. and Swazy, E. F. |
" Shadow-cast " Replicas for Use in the Electron Microscope |
Thielsch, Helmut |
Electron Metallographic Methods and Some Results for Magnesium Alloys |
Heidenreich, R. D., Gerould, C. H. and McNulty, R. E. |
Graphical Methods of Representing Some Conditions of Plasticity |
Baldwin, William Marsh, Jr. |
A Study of the Behavior of Rutheniopalladium in Torch Flames, with the Object of Improving Soldering Technique |
Atkinson, R. H. and Gladis, G. P. |
An Equilibrium Study of the Distribution of Phosphorus between Liquid Iron and Basic Slags |
Winkler, Theodore B. and Chipman, John |
Sulphur Equilibria between Liquid Iron and Slags |
Grant, Nicholas J. and Chipman, John |
Hardenability Effects in Relation to the Percentage of Martensite |
Hodge, J. M and Orehoski, M. A. |
Properties of Cerium-containing Magnesium Alloys at Room and Elevated Temperatures |
Leontis, T. E. and Murphy, J. P. |
Effect of Copper and Some Other Metals on the Gold-germanium Eutectic |
Jaffee, Robert I. and Gonser, Bruce W. |
Toughness and Fracture of Hardened Steels |
Grossman, Marcus A. |
The Blast-furnace Process and Means of Control |
Joseph, T. L. |
The Low-temperature Gaseous Reduction of Magnetite Ore to Sponge Iron |
Specht, O. George, Jr. and Zapffe, Carl A. |
The Effect of Phosphorus on the Properties of Gun Metal- Reducing Conditions |
Colton, Robert A. and Loring, Blake M. |
The Temperature Range of Martensite Formation |
Grange, R. A. and Stewart, H. M. |
Rates of High-temperature Oxidation of Magnesium and Magnesium Alloys |
Leontis, T. E. and Rhines, F. N. |
A Precipitation-hardening Stainless Steel of the 18 Per Cent Chromium, 8 Per Cent Nickel Type |
Smith, R., Wyche, E. H. and Gorr, W. W. |
Diffusion of the Stable Isotopes of Nickel in Copper |
Johnson, William A |
Some Properties of Sand-cast Alloys in the Magnesium-rich Corner of the Magnesium-aluminum-zinc System |
Busk, R. S. and Marande, R. F. |
The Relationship between Transformation at Constant Temperature and Transformation during Cooling |
Manning, G. K. and Lorig, C. H. |
Factors for the Calculation of Hardenability |
Kramer, Irvin R., Siegel, Sidney and Brooks, J. Gardner |
Grain-growth Inhibitors in Steel |
Halley, James W. |
A Radiation Pyrometer for Open-hearth Bath Measurements |
Clark, H. T. and Feigenbaum, S. |
Effect of Original Orientation on Orientation Changes during Recrystallization in Silicon Ferrite |
Dunn, C. G. |
Some Aspects of Crystal Recovery in Silicon Ferrite Following Plastic Strains |
Dunn, C. G. |
Anelasticity of Metals |
Zener, Clarence |
Elastic After-effects in Iron Wires from 20° to 550°C |
West, William A. |
The Boron-oxygen Equilibrium in Liquid Iron |
Derge, Gerhard |
Anisothermal Decomposition of Austenite |
Hollomon, J. H., Jaffe, L. D. and Norton, M. R. |
Seminar on the Theory of Sintering – with Discussion |
Rhines, F. N. |
The Pressing Operation in the Fabrication of Articles by Powder Metallurgy |
Seelig, Richard P. and Wulff, John |
A Study of the Physical Properties and Microstructure of Sintered Stee |
Stern, George |
Nickel-iron Alloys Produced by Powder Metallurgy |
Delisle, Laurence and Finger, Aaron |
Discussion - Powder Metallurgy Symposium |
|
Solubility of Hydrogen in Electrolytic Manganese and Transition Points in Electrolytic Manganese |
Potter, E. V. and Lukens, H. C. |
Stress Rupture and CreepTests on Aluminum-alloy Sheet at Elevated Temperatures |
Flanigan, A. E., Tedsen, L. F and Dorn, J. E. |
The Mechanical Equation of State |
Hollomon, John H. |
Oxygen in Liquid Open-hearth Steel-Oxygen Content during the Refining Period |
Brower, T. E. and Larsen, B. M. |
Effect of Alloys in Steel on Resistance to Tempering |
Crafts, Walter and Lamont, John L. |
The Determinatipq of Oxide cobalt |
Young, R. S., Hall, A. J. and Talbot, H. L. |
Training of Metallurgical Engineers in the Steel Industry |
Wright, E. C. |
The Melting of Molybdenum in the Vacuum Arc |
Parke, Robert M. and Ham, John L. |
Discussion – Iron and Steel Division |
|
The Dithionate Process for Recovery of Manganese from Low-grade Ores |
Ravitz, S. F., Wyman, W. F., Back, A. E. and Tame, K. E. |
Distillation of Zinc and Refining of Residual Metals from Copper-base Alloys |
Poland, Frank F. |
Spectrographic Analysis of Special High-grade Zinc |
Bethune, A. Y. and Schmittroth, W. W. |
Calculation of Tensile Strength and Yield Point from the Chemical Composition and Cooling Rate |
Kramer, Irvin R., Gorsuch, P. D. and Newhouse, D. L. |
German Iron Ores Yield Vanadium |
Fischer, R. P. |
An EIectron Diffraction Study of Oxide FiIms Formed on Iron, Cobalt, Nickel, Chromium and Copper at High Temperatures |
Gulbransen, E. A. and Hickman, J. W. |
An Electron Diffraction Study of Oxide Films Formed on Alloys of Iron, Cobalt, Nickel and Chromium at High Temperatures |
Hickman, J. W. and Gulbransen, E. A. |
Zinc Diffusion in Alpha Brass |
Smigelskas, A. D. and Kirkendall, E. O. |
Work-hardening and Rupture in Metals |
Jackson, Lloyd R. |
Oxygen in Liquid Open-hearth Steel-Effect of Special Additions, Stirring Methods and Tapping |
Brower, T. E. and Larsen, B. M. |
Boron in Certain Alloy Steels |
Udy, M. C. and Rosenthal, P. C. |
Production of Low-sulphur Sponge Iron |
Buehl, R. C., Shoub, E. P. and Riott, J. P. |
The Alpha Solid Solution Area of the Copper-manganese-aluminum System |
Dean, R. S., Long, J. R., Graham, T. R., Roberson, A. H. and Armantrout, C. E. |
Some Factors Affecting Particle Size of Hydrogen-reduced Tungsten Powder |
Kopelman, Bernard |
An Electrochemical Study of the Properties of Molten Slags of the Systems CaO-SiO2 and Ca0-A1203-Si02 |
Chang, Lo Ching and Derge, Gerhard |
Spot Welding of Titanium |
Dean, R. S., Long, J. R., Hayes, E. T. and Root, D. C. |
Hydrogen in Magnesium Alloys |
Busk, R. S. and Bobalek, E. G. |
Precipitation in Age-hardened Aluminum Alloys |
Geisler, A. H. and Keller, F. |
Twinning in Polycrystalline Magnesium |
Barrett, C. S. and Haller, C. T. |
Twin Relationships in Annealed Copper Strip |
Coheur, P. and Barrett, C. S. |
Hot Deformation Structures, Veining and Red-shortness Cracks in Iron and Steel |
Hultgren, Axel and Herrlander, B. |
Some Effects of Zirconium on Extrusion Properties of Magnesium-base Alloys Containing Zinc |
Doan, J. P. and Ansel, G. |
Transformation of Austenite in an Aluminum-chromium- molybdenum Steel |
Grange, R. A., Holt, W. S. and Tkac, E. T. |
Comparison of Various Structural Alloy Steels by Means of the Static Notch-bar Tensile Test |
Sachs, G., Ebert, L. J. and Brown, W. F., Jr. |