Title
|
Author
|
Title Page |
|
Recrystallization Texture of Aluminum after Compression |
Barrett, Charles S. |
The Copper-rich Alloys of the Copper-nickel-phosphorus System |
Crampton, D. K., Burghoff, H. L. and Stacy, J. T. |
Some Observations on the Recrystallization of an Iron-nickel Alloy |
Sachs, George and Spretnak, J. |
Correlation of Deformation and Recrystallization Textures of Rolled 70-30 Brass |
Brick, R. M. |
Plastic Deformation and Recrystallization of Aluminum Single Crystals |
Collins, J. A. and Mathewson, C. H. |
Variation of Internal Friction with Grain Size |
Zener, Clarence and Randall, R. H. |
Tensile Deformation of Critically Oriented Brass Crystals |
Burghoff, H. L. |
Title Page |
|
An Electron Diffraction Study of Anodic Films |
Harrington, R. A. and Nelson, H. R. |
A Metallographic Study of Internal Oxidation in the Alpha Solid Solutions of Copper |
Rhines, Frederick N. |
Equilibria in Liquid Iron with Carbon and Silicon |
Darken, L. S. |
Slag-metal Relationships in the Basic Open-hearth Furnace |
Fetters, Karl L. and Chipman, John |
Recovery and Recrystallization in Long-time Annealing of 70-30 Brass |
Maddigan, S. E. and Blank, A. I. |
Effect of Cold-work upon Hardness and Recrystallizing Behavior of Pure Platinum |
Wise, E. M. and Vines, R. F. |
Changes in Damping Capacity during Annealing of Alpha Brass |
Norton, John T. |
The Cobalt-nickel-silicon System between o and 20 Per Cent Silicon |
Forsyth, Arthur C. and Dowdell, R. L. |
Crystal Orientation in Silicon-iron Sheet |
Burwell, J. T. |
Title Page |
|
Pitting of Stainless Steel |
Uhlig, H. H. |
Solubility of Nitrogen in Liquid Fe-Cr and Fe-V Alloys |
Brick, R. M. and Creevy, J. A. |
An X-ray Study of the Alloys of Silver with Lead, Bismuth and Thallium |
Chiswik, Haim H. and Hultgren, Ralph |
Determination of Orientations by Etch Pits |
Barrett, Charles S. and Levenson, L. H. |
Formation of Inclusions in Steel Castings |
Crafts, Walter - Egan, John J. and Forgeng, W. D. |
The Process of Precipitation from Solid Solution, I-A Crystallographic Mechanism for the Aluminum-copper Alloys |
Samans, Carl H. |
Copper Embrittlement, IV |
Wyman, L. L. |
Title Page |
|
Some Experiments on Sintering Lead Sulphate Products |
Oldright, G. L, Ravitz, S. F. and De Rycker, Henry |
Effects of Temperature of Pretreatment on Creep Characteristics of 18-8 Stainless Steel at 600° to 800° c |
Austin, Charles R. and Samans, Carl H. |
Tensile Strength and Composition of Hot-rolled Plain Carbon Steels |
Quest, C. F. and Washburn, T. S. |
Slag Control |
Herty, C. H., Jr. |
Acceleration of the Rate of Corrosion by High Constant Stresses |
Dix, E. H., Jr. |
The Coalescence Process for Producing Semifabri- cated Oxygen-free Copper |
Tyssowski, John |
Title Page |
|
Rate of Diffusion of Carbon in Austenite in Plain Carbon in Nickel and in Manganese Steels |
Wells, Cyril and Mehl, Robert F. |
Effects of Low-temperature Heat-treatment on Elastic Properties of Cold-rolled Austenitic Stainless Steels |
Franks, Russell and Binder, W. O. |
Crystallography of Austenite Decomposition |
Greninger, Alden B. and Troiano, Alexander R. |
Precipitation-hardening of a Complex Copper Steel |
Halley, J. W. |
Study of Lattice Distortion in Plastically Deformed Alpha Iron |
Goss, Norman P. |
Title Page |
|
Iron-ore Concentration and the Lake Erie Price |
Davis, E. W. |
X-ray Analysis of Hot-galvanized Heat-treated Coatings |
Morral, F. R. and Miller, E. P. |
Creep and Recrystallization of Lead |
Smith, Albert A., Jr. |
Effect of Composition and Steelmaking Practice on Graphitization below the A1 of Eighteen One Per Cent Plain Carbon Steels |
Austin, Charles R. and Fetzer, Maurice C. |
Precision X-ray Study of the High-silver Aluminum- silver Alloys |
Foote, Frank and Jette, Eric R. |
Production of Pig lron in Electric Furnace |
Hart, Charles |
Analysis of the Cold-rolling Texture of lron |
Barrett, Charles S. and Levenson, L. H. |
Title Page |
|
The Acid Bessemer Process of 1940 |
Graham, H. W. |
Measurement of Irreversible Potentials as a Metallurgical Research Tool |
Brown, R. H., Fink, W. L. and Hunter, M. S. |
Hydrogen Embrittlement of Pure Copper and of Dilute Copper Alloys by Alternate Oxidation and Reduction |
Rhines, Frederick N. and Anderson, William A. |
Coalesced Copper-Its History, Production and Characteristics |
Stout, H. H. |
Grain Orientation of Cast Polycrystalline Zinc, Cadmium and Magnesium |
Edmunds, Gerald |
History of Developments in Direct Smelting Practice at the McGill Plant of the Nevada Consolidated Copper Corporation |
Larson, Leonard |
Structure and Properties of Some Iron-nickel Alloys |
Sachs, George and Spretnak, J. W. |
Title Page |
|
Subboundary Structures of Recrystallized lron |
Goss, N. P. |
Beneficial Effects of Zirconium in Cast Nickel- silicon Bronzes |
Hensel, F. R., Larsen, E. I. and Doty, A. S. |
Tensile Properties of Rolled Magnesium Alloys- Binary Alloys with Calcium, Cerium, Gallium and Thorium |
McDonald, John C. |
X-ray Study of the Solid Solubility of Lead, Bismuth and Gold in Magnesium |
Foote, Frank and Jette, E. R. |
Effect of Composition on Physical and Chemical Properties of 14-karat Gold Alloys |
Jarrett, Tracy C. |
On the Equilibrium Solidification of Solid Solutions (Abstract) |
Cohen, Morris and Kimball, William P. |
Study of the Metallography and Certain Physical Properties of Some Alloys of Cobalt, lron and Titanium |
Austin, Charles R. and Samans, Carl H. |
Influence of Chemical Composition on Hot-working Properties and Surface Characteristics of Killed Steels |
Soler, Gilbert |
Use of Sinter in Blast-furnace Burdens |
Slater, J. H. |