|
Title
|
Author
|
| Drift of Things |
Cohan, A. S. |
| Elliptical Electric Furnace Outperforms Conventional Circular Type |
Preston, James K. |
| Induction Stirring Provides Better Control of Operating Techniques |
Walther, Harry F. |
| 17 Years of Stirring History Shows International Exchange of Ideas |
Malmlow, Eric G. |
| Tin Increases Strength of Ti-Al Alloys Without Loss in Fabricability |
Finlay, W. L. – Jaffee, R. I. – Durstein, R. C. |
| Closed Electric Reduction Furnaces Permit Utilization of Furnace Gas |
Sem, M. O. |
| Optimum Composition of Blast Furnace Slag as Deduced from Liquidus Data for the Quaternary System CaO-MgO-Al2O8-SiO2 |
Osborn, E. F. – DeVries, R. C. – Gee, K. G. – Kraner, H. M. |
| Magnetic Transformation of Iron in Copper Matrix at Low Temperatures |
Cech, R. E. – Turnbull, D. |
| Solidification of Aluminum-Rich Aluminum-Copper Alloys |
Michael, A. B. – Bever, M. B. |
| Effect of Repeated Tensile Prestrain on the Ductility of Some Metals |
Franz, E. C. |
| Mechanism of Plastic Flow in Titanium: Manifestations and Dynamics of Glide |
Rosi, F. D. |
| Reaction of Oxygen and Nitrogen with Titanium from 700° to 1050°C |
Richardson, L. S. – Grant, N. |
| Creep Correlations of Metals at Elevated Temperatures |
Sherby, O. D. – Orr, R. L. – Dorn, J. E. |
| Structure of Some Iridium-Osmium Alloys |
Vacher, H. C. – Bechtoldt, C. – Maxwell, E. |
| Drift of Things |
Robie, E. H. |
| High Performance Jet Engine Design Dependent Upon Metallurgical Ingenuity |
Perlmutter, I. |
| Titanium Alloys Give Promise of High Temperature Applications |
Crossley, F. – Kessler, H. |
| Poland and China Expand Steel Capacities |
|
| Sources of Inclusions from Pouring Refractories Investigated |
Fedock, M. P. |
| Regenerator Efficiency and Air Preheat in the Open Hearth |
Larson, B. M. |
| Chromium Distribution Between Liquid Iron and Molten Basic Slags |
Grant, N. – Roberts, E. – Chipman, J. |
| Wustite Phase in Partially Reduced Hematite |
Bitsianes, G. – Joseph, T. |
| Theoretical Analysis of Diffusion of Solutes During the Solidification of Alloys |
Wagner, C. |
| Heat Treatment, Structure and Mechanical Properties of Ti-Mn Alloys |
Holden, F. C. – Ogden, H. R. – Jaffee, R. I. |
| Constitution of Iron-Boron Alloys in the Low Boron Range |
Nicholson, M. E. |
| Crystallographic Angles for Hexagonal Metal |
Taylor, A. – Leber, Sam |
| Influence of Oxygen, Nitrogen, and Carbon on The Phase Relationships of the Ti-Al System |
Van Thyne, R. J. – Kessler, H. D. |
| Titanium-Chromium-Oxygen System |
Wang, Chih-Chung – Grant, Nicholas J. |
| Uranium-Titanium Alloy System |
Udy, Murray – Boulger, Francis |
| Heat Treatment of Titanium Generalized In Terms of Beta Prime |
Jaffe, Leonard |
| Aging Characteristics of Nickel-Chromium Alloys Hardened with Titanium and Aluminum |
Nordheim, Rolf – Grant, Nicholas |
| Cursory Investigation of Intermediate Phases in the Systems Ti-Zn, Ti-Hg, Zr-Zn, Zr-Cd, and Zr-Hg by X-ray Powder Diffraction Methods |
Pietrokowsky, P. |
| Observations on Elevated-Temperature Tensile Deformation |
Guard, R. W. – Keeler, J. H. – Reiter, S. F. |
| System Titanium-Manganese-Molybdenum |
Elliott, R. P. – Levinger, B. W. – Rostoker, W. |
| Constitution and Properties of Ag-Cu-Zn Brazing Alloys |
Weigert, K. M. |
| System Zirconium-Oxygen |
Domagalo, R. F. – McPherson, D. J. |
| High Temperature Strength of Wrought Aluminum Powder Products |
Gregory, E. – Grant, N. J. |
| Sigma Phase in Binary Alloys |
Greenfield, P. – Beck, P. A. |
| Annealing of a Cold Rolled Aluminum Single Crystal |
Lutts, A. H. – Beck, P. A. |
| An Investigation of the Systems Formed by Chromium, Molybdenum, and Nickel |
Bloom, D. S. – Grant, N. J. |
| Solid State Bonding of Aluminum to Nickel |
Storchheim, S. – Zambrow, J. L. – Hausner, H. H. |
| Effect of Stress on the Creep Rates of Polycrystalline Aluminum Alloys Under Constant Structure |
Sherby, O. D. – Frenkel, R. – Nadeau, J. – Dorn, J. E. |
| Plasticity of Molybdenum Single Crystals at High Temperature |
Maddin, R. – Chen, N. K. |
| Study of the Effect of Carbon Content on the Structure and Properties of Sintered WC-Co Alloys |
Gurland, J. |
| Orientation Relationships in Cast Germanium |
Ellis, W. C. – Fageant, J. |
| Redistribution of Solutes by Formation and Solidification of a Molten Zone |
Pfann, W. G. |
| Hydrogen Embrittlement of Steels |
Brawn, J. T. – Baldwin, W. |
| On the Temperature Range of the Martensite Transformation in the Cu-Zn System |
Titchener, A. – Bever, M. B. |
| On the Torsional Deformation and Recovery of Single Crystals |
Hsu, S. S. – Cullity, B. D. |
| Drift of Things |
Cohan, A. S. |
| Copper Smelting in Boliden's Rönnskär Works Described |
Herneryd, O. – Sundstrom, O. – Norro, A. |
| Current Refractory Practice as Applied in Copper Smelting |
Rochaw, W. – McGill, L. |
| Direct Reading Spectrograph Gives Accurate Control in Aluminum Production |
Colwell, D. L. – Tichy, O. |
| Phases in Titanium Alloys Identified by Cumulative Etching |
Ence, E. – Margolin, H. |
| Application of the ARL Quantometer to Production Control in a Steel Mill |
Brown, H. C. |
| Distribution of Manganese Between Slag and Metal Under Reducing Conditions |
Stukel, J. E. – Cocubinsky, J. |
| Occurrence of Silicon Carbide in the Fe-C-Si System |
Fulton, J. C. – Chipman, J. |
| Copper Converting Practice at American Smelting & Refining Co. Plants |
Archibald, F. W. |
| A Quantitative Measure of Temper Embrittlement |
Brown, N. |
| On the Effects of Oxygen on Molybdenum |
Maringer, R. – Schwope, A. |
| Constitution and Mechanical Properties of Titanium-Hydrogen Alloys |
Lenning, G. A – Craighead, C. – Jaffee |
| Load-Temperature History of Lattice Strain in Aluminum Alloy |
Rosenthal, D. – Kaufman, M. |
| Drift of Things |
Cohan, A. S. |
| Rare Earth Additions Affect Surface Quality of Low Carbon Steel |
Russell, J. V. |
| Nozzle Replacement From Outside Is Safe and Efficient Method |
McDonough, W. C. |
| Progress in Sintering- Quality of Iron Ore Sinter as Related to Moisture and Coke Content |
Morrissey, H. A. – Powers, R. |
| Progress in Sintering- Additives Produce Strong and Reducible Iron Ore Sinter |
Burlingame, R. D. – Bitsianes, G. – Joseph, T. L. |
| Quebec-Labrador Iron Ore Potential Dwarfs Mesabi Range |
Durrell, W. H. |
| Steelmaking Processes--Some Future Prospects |
King, C. D. |
| Chemical Reactions in the Iron Blast Furnace |
Peters, J. F. |
| Drift of Things |
Cohan, A. S. |
| Production of Rare Earth Metals In Quantity Allows Testing of Physical Properties |
Spedding, F. – Daane, A. |
| Bessemer and Open Hearth Steelmaking Costs Compared |
Mitchell, James |
| Copper Slabs Weighing 3000 Lb Successfully Cast at Raritan Works |
Pearce, C.D. |
| Method Described for Evaluation of Lubricants in Powder Metallurgy |
Sheinhartz, I. – McCullough, H. – Zambraw, J. |
| Melting and Freezing |
Chalmers, Bruce |
| Isothermal Temper Embrittlement and the Effect of Hardness on Transition Temperature |
Woodfine, B. C. |
| Effect of Si, Mn, P, Al, C, Ni, and Cu on the Mechanism of Sulphur Transfer Across a Slag-Metal Interface |
Goldman, K. M. – Derge, G. – Philbrook, W. |
| Mechanism and Rate-Controlling Factors in the Dissolution of Gold in Cyanide Solution |
Kudryk, V. – Kellogg, H. H. |
| A Rationalization of the Oxygen Solid Solubility in Some Transition Metals |
Seybold, A. U. – Fullman, R. |
| Primary and Secondary Recrystallization in Cold Rolled Bicrystals of Silicon Iron |
Dunn, C. G. |
| Mechanical Properties of Beryllium Fabricated By Powder Metallurgy |
Beaver, W. W. – Wikle, K. G. |
| Mechanical Properties of Beryllium Copper At Subzero Temperatures |
Richards, J. T. – Brick, R. M. |
| Investigation of the Heat Treatment Of Commercial Titaniunl-Base Alloys |
Luini, L. – Lee, E. |
| Role of Strain Energy In Solid Solution Thermodynamics |
Machlin, E. S. |
| Electrical Resistivity of Dilute Binary Terminal Solid Solutions |
Hibbard, Walter |
| Investigation of the Grain Coarsening Behavior Of Some Aluminum Alloys |
Bernstein, Harold |
| 475°C (885°F) Embrittlement in Stainless Steels |
Lena, A. J. – Hawkes, M. F. |
| Determination of the Self-Diffusion Coefficients Of Gold by Autoradiography |
Gatos, Harry – Kurtz, Anthony |
| Allotropic Transformations at High Temperature |
McCaldin, James – Duwez, Pol |
| Mechanism of Ortho Kink-Band formation In Compressed Zinc Monocrystals |
Gilman, J. J. |
| The Warm Pressing of Beryllium Powder |
Pinto, Norman |
| Creep Behavior of Magnesium-Cerium Alloys |
Roberts, C. S. |
| Solubility of Oxygen in Alpha Iron |
Seybolt, A. U. |
| The Influence of Carbon and Manganese on The Properties of Semikilled Hot Rolled Steel |
Boulger, F. – Frazier, R. |
| Impact Transition Temperatures of Some Pearlite-Free Mild Steels |
Josefsson, Ake |
| Plastic Deformation of Iron Between 300° and 77.2°K – Discussion |
|
| Grain Boundary Attack on Aluminum in Hydrochloric Acid and Sodium Hydroxide – Discussion |
|
| Identification of the Precipitate Accompanying 885°F Embrittlement in Chromium Steels – Discussion |
|
| Measurement of Particle Sizes in Opaque Bodies – Discussion |
|
| Plastic Deformation of Single Crystals of Copper – Discussion |
|
| Plastic Deformation of Rectangular Zinc Monocrystals – Discussion |
|
| Variation of Plastic Properties with Annealing Procedure in Zinc Single Crystals – Discussion |
|
| Recovery in Single Crystals of Zinc – Discussion |
|
| Some Observations on the Work Hardening of Metals – Discussion |
|
| Some Applications of the Thermodynamic Theory of Irreversible Processes to Physical Metallurgy – Discussion |
|
| Self-Diffusion of Iron in Iron Oxides and the Wagner Theory of Oxidation – Discussion |
|
| Decay of Lattice Defects Frozen into an Alloy by Quenching – Discussion |
|
| The Ternary System Ti-Ta-C – Discussion |
|
| Order-Disorder Transformation in Cu-Au Alloys Near the Composition CuAu – Discussion |
|
| Silver-Cadmium Eutectoid – Discussion |
|
| On the Theory of the Formation of Martensite – Discussion |
|
| Rate of Propagation of Martensite – Discussion |
|
| Rate of Formation of Isothermal Martensite in Fe-Ni-Mn Alloy – Discussion |
|
| Calculation of Martensite Nucleus Energy Using the Reaction-Path Model – Discussion |
|
| Martensite Nucleation in Substitutional Iron Alloys – Discussion |
|
| Stabilization of the Austenite-Martensite Reaction in a High Chromium Steel – Discussion |
|
| Inhomogeneity in Creep Deformation of Coarse Grained High Purity Aluminum – Discussion |
|
| Subgrain Formation in High-Purity Aluminum During Creep at High Temperatures – Discussion |
|
| Creep Behavior of Extruded Electrolytic Magnesium – Discussion |
|
| Further Progress in the Development of Mg-Zr Alloys to Give Good Creep and Fatigue Properties Between 500° and 650°F – Discussion |
|
| The Properties of Sand Cast Mg-Th-Zn-Zr Alloys – Discussion |
|
| Deformation Mechanisms in Alpha Titanium – Discussion |
|
| The Cold Rolled Texture of Titanium – Discussion |
|
| Textures of Rolled and Annealed Iodide Zirconium – Discussion |
|
| Densification and Kinetics of Grain Growth During the Sintering of Chromium Carbide – Discussion |
|
| Influence of Aluminum and Silicon Deoxidation on the Strain Aging of Low-Carbon Steels – Discussion |
|
| Electrical Resistivity of Liquid Metals and of Dilute Liquid Metallic Solutions – Discussion |
|
| Authors' Supplement to Calculation of Interdiffusion Coefficients When Volume Changes Occur – Discussion |
|
| Drift of Things |
Kirkendall, Ernest |
| The Nature of Education in Metallurgical EngineE:ring |
Mehl, R. F. |
| Titanium Metal Production Expanded at Henderson Plant |
Maddex, P. J. |
| Taconite Beneficiation Comes of Age at Reserve's Babbitt Plant |
Lee, Oscar |
| Sinter Is What You Make It |
Rose, E. H. – Reed, D. J. |
| Reverberatory Furnace Practice at Noranda |
Anderson, J. N. |
| A Correction to "The Sigma Phase in Binary Alloys" |
Greenfield, P. – Beck, P. A. |
| Activities of Fe, FeO, Fe2O3, and CaO in Simple Slags |
Larson, H. R. – Chipman, J. |
| Purification of Antimony and Tin by a New Method of Zone Refining |
Tanenbaum, M. – Goss, A. J. – Pfann, W. G. |
| Creep Rupture Properties and Structural Changes in Carbon and Low Alloy Steels |
Wilder, A. B. – Ketterer, E. F. – Collyer, D. B. |
| New Techniques for Preparing Homogeneous Alloys |
Levesque, P. |
| Solid Solubility of Oxygen in Columbium |
Seybolt, A. U. |
| Drift of Things |
Cohan, A. S. |
| European Oxygen Steelmaking Is of Far-Reaching Significance |
|
| Titanium Extraction by Chloride Process Presents a Variety of Problems |
Opie, W. R. |
| Direct Current Requirements at Carteret Copper Refinery Supplied by Three Units |
Meyer, E. M. |
| Operating Experience With a Two-Foot Diameter Blast Furnace |
Buehl, R. C. |
| Development of Oxygen Steelmaking |
Cuscoleca, O. |
| G-Modulus Temperature Coefficient for Beryllium Copper Wire |
Richards, J. T. |
| On the Basic Bessemer Process |
Coheur, P. – Kasmider, H. |
| Forgeability of Steels With Varying Amounts of Manganese and Sulphur |
Anderson, C. T – Donaldson, V. – Kimball, R. – Cattair, F. |
| Desilverizing of Lead Bullion |
Davey, T. R. A. |
| Drift of Things |
Cohan, A. S. |
| Open Hearth Shops Adopt Developments in Aids to Labor |
Jones, V. W. |
| Survey Provides Analysis of Cold Metal Shop Melting Practice |
Fredericks, S. L. |
| Rare Earths Counteract Hot Rolling Defects in Stainless Steel |
Henke, R. H. – Lula, R. A. |
| International Nuclear Engineering Congress Highlights Metallurgical Research |
Bach, J. H. |
| Ingot Cracks in Killed, Fine-Grained C1020 Steel |
Orehoski, M. A. – Arant, N. R. – Pusateri, J. A. |
| Roasting Metallic Sulphides in a Fluid Column |
Cyr, H. M. – Siller, C. W. – Steele, T. F. |
| An Fe-Cr-Mo-Ni Sigma Phase |
Allten, A. G. |
| Effect of Aluminum on the Low Temperature Properties of Relatively High Purity Ferrite |
Green, H. T. – Brick, R. M. |
| Locations and Sizes of Interstitial Holes in the Alpha-Uranium Lattice |
Opinsky, A. J. |
| Columbium-Vanadium Alloy System |
Wilhelm, H. A. – Carlson, O. N. – Dickinson, J. M. |
| Some Observations on Grain Boundary Shearing During Creep |
Fazan, B. – Sherby, O. D. – Dorn, J. E. |
| Drift of Things |
Cohan, A. S. |
| Midvale Smelter Practice Modified for Two Shift Operation |
Johnson, H. L. – Nelson, C. |
| Tests Emphasize Scrap Quality Control Incinerator Scrap and No.2 Bundles Related to Adverse Heat Time |
Mueller, G. G. |
| Ingot Yield Rises as Market Permits Greater Care in Scrap Selection |
Moore, A. K. |
| Recent Rolling Mill Practices Indicate Trend of Future Investigations |
Polokowski, N. H. |
| Manganese Modification of the Fe-S-O System |
Hilty, D. C. – Crafts, W. |
| Removal of Copper from Iron-Copper-Carbon Alloys |
Langenberg, F. – Lindsay, R. |
| Equilibrium Pressure Measurements Above ZnS from 680° to 825°C |
McCabe, C. Law |
| Diffusion of Boron in Alpha Iron |
Busby, P. – Wells, C. |
| Creep-Rupture Characteristics of AI-Mg Solid-Solution Alloys |
Mullendore, A. – Grant, N. |
| Precipitation of Iron Oxide from Alpha Fe-O Solid Solutions |
Seybolt, A. U. |
| Ferromagnetism of Certain Manganese-Rich Alloys |
Morgan, E. R. |
| Influence of Oxygen and Nitrogen in Solution in Alpha Titanium on the Friction Coefficient of Copper on Titanium |
Yankee, W. R. – Machlin, E. |
| Preferred Orientation Of Cold-Rolled Uranium Foil |
Seymour, W. |
| Effects of Temperature on the Deformation of Beta Brass |
Barrett, Charles |
| Stress-Strain Characteristics and Slip-Bond Formation In Metal Crystals: Effect of Crystal Orientation |
Rosi, F. D. |
| Rate of Self-Diffusion in Polycrystalline Magnesium |
Shewman, P. G. – Rhines, F. |
| Etch Pits and Dislocations In Germanium and Silicon |
Oberly, J. J. |
| Electron Optical Study of Oxidation of High Purity Iron At Low Oxygen Pressures |
Guibransen, Earl- McMillan, William – Andrew, Kenneth |
| Self-Diffusivity Along Edge-Dislocation Singular Lines in Silver |
Hendrickson, H. – Machlin, E. |
| High Pressure Oxidation of Metals: Tantalum in Oxygen |
Peterson, Robert – Fassell, W. Martin – Wadsworth, Milton |
| Coefficients of Thermal Expansion for Zirconium |
Russell, R. B. |
| Mathematical Methods for Zone-Melting Processes |
Reiss, Howard |
| Viscosity and Density of Liquid Lead-Tin And Antimony-Cadmium Alloys |
Fisher, H. J. – Phillips, A. |
| On the Nucleation of Pearlite |
Nicholson, M. E. |
| Effect of Tempering on the Hardness of Retained Austenite |
Stark, Philip – Lement, B. S. |
| Ordering Reaction of the Cu4Pd Alloy |
Geisler, A. – Newkirk, J. B. |
| Method of Using a Fine-Focus X-ray Tube for Examining The Surface of Single Crystals |
Schulz, L. G. |
| Mechanism for theOri-gin of Recrystallization Nuclei |
Nielson, John P. |
| Correlation Between Microstructure and Resistivity Of Transforming Ti-Mn Alloys |
DeLazaro, D. – Levinson, D. |
| Decrease of Density During Plastic Deformation of Nodular Cast Iron |
Clough, W. R. – Shank, M. E. |
| Drift of Things |
Cohan, A. S. |
| Hot Pressing, Press Forming Loom As Answers to Titanium Fabrication |
Dodds, H. W. – Davies, O. F. |
| Bifurcated Spouts Increase Open Hearth Output- Close Supervision Prevents Tieups |
Straney, C. N. |
| Increased Shop Tonnages Realized |
Sorrells, E. C. |
| Double Heats Show No Decrease in Quality |
Kelley, J. H. |
| Brick Sleeve Solves Tapping Problem |
Northrup, H. H. |
| Transportation Factors Are Key to Development of Caribbean |
Johnson, A. F. |
| Fuel Balance at Steubenville Works Controlled by Utilizing |
Dickson, J. H. – Nuzum, G. C. |
| It Took the Mesabi Discovery To Beat Edison's Taconite Venture |
|
| Methods for Separating Rare-Earth Elements in Quantity as |
Spedding, F. H. – Powell, J. E. |
| Slag-Metal-Graphite Reactions and the Activity of Silica in |
Fulton, J C. – Chipman, J. |
| Influence of Boron on Hardenablhtyof Steel |
Fisher, J. C. |
| Phase Transformations in Titanium-Rich Alloys of Iron and |
Polonis, D. H. – Parr, J. G. |
| Quantitative Substructure and Tensile-Property Investigations |
Ancker, B. – Parker, E. R. |
| Drift of Things |
Cohan, A. S. |
| French Patent Solves Fume Problem in Oxygen Steelmaking |
Leroy, P. J. – Septier, L. |
| Power Equipment Increases Open Hearth Productivity |
Cooper, G. E. |
| Furnace Operation and Casting Improved at Copper Cliff |
Bischoff, J. C. |
| Borehole Camera Is Milestone in Subsurface Exploration |
Burwell, E. B. – Nesbitt, R. H. |
| Fundamentals of Mixing and Agitation with Applications to |
Rushton, J. H. – Mahony, L. |
| Effect of Subcritical Rate on the Brittle-Fracture Characteristics |
Mair, L. |
| Thoughts on Lead Blast-Furnace Smelting, With Discussion |
Haney, L. B. – Hopkins, R. J. |
| Applicability of Powder Metallurgy to Problems of High |
Ault, G. M. – Deutsch. G. |
| Strain Hardening of Latent Slip Systems in Zinc Crystals |
Edwards, E. H. – Washburn, Jack |
| Effect of Carbon Content on the 500°F Embrittlement of Tempered Martensite |
Payson, P. |
| An Examination of the Decrease of Surface-Activity Method Of |
Carter, R. – Richardson, F. |
| A Calorimetric Investigation of Heats of Formation and Precipitation In Some Cu-Sn Alloys |
Cohen, J. – Leach, J. – Bever, M. |
| Effect of Nitrogen on Sigma Formation in Cr-Ni Steels At 1200°F (650°C) |
Tisinai, G. – Stanley, J. – Samans, C. |
| Titanium-Manganese Phases |
Margolin, Harold – Ence, Elmars |
| Temper Embrittlement of 5140 Steel |
Bush, S. H. – Siebert, C. A. |
| Stabilization of the Bainite Reaction |
Hehemann, R. – Troiano, A. |
| Data for One of the Martensitic Transformations In An 11 Pct Mo-Ti Alloy |
Weinig, S. – Machlin, E. S. |
| Mechanical Properties of Alpha Titanium as Affected By Structure and Composition |
Jaffee, R. – Holden, F. – Ogden, H. |
| Some Observations on the Tertiary Stage of Creep Of High Purity Aluminum |
Wilms, G. R |
| Silicon-Oxygen Equilibrium in Liquid Iron—A Revision – Discussion |
|
| Regenerator Efficiency and Air Preheat in the Open Hearth – Discussion |
|
| Examination of a High Sulphur Free-Machining Ingot, Bloom and Billet Sections – Discussion |
|
| Development of Oxygen Steelmaking – Discussion |
|
| On the Basic Bessemer Process – Discussion |
|
| Solid Phase Identification in Partially Reduced Iron Ore – Discussion |
|
| Further Studies of the Tuyere Zone of the Blast Furnace – Discussion |
|
| Constitution of the FeO-Fe2O3-SiO2 System at Slagmaking Temperatures – Discussion |
|
| Reaction of Silver with Aqueous Solutions of Cyanide and Oxygen – Discussion |
|
| Copper Converting Practice at American Smelting and Refining Company Plants – Discussion |
|
| Thermodynamic Properties of Molybdenum Dioxide – Discussion |
|
| Preparation of Metallic Iron of High Purity – Discussion |
|
| Heat Treatment, Structures, and Mechanical Properties of Ti-Mn Alloys – Discussion |
|
| Annealing of a Cold Rolled Aluminum Single Crystal – Discussion |
|
| Torsional After-Effect Measurement and Applications to Aluminum – Discussion |
|
| Mechanism of Plastic Flow in Titanium: Manifestations and Dynamics of Glide – Discussion |
|
| Uranium-Titanium Alloy System – Discussion |
|
| Creep Correlations of Metals at Elevated Temperatures – Discussion |
|
| Aging Characteristics of Nickel-Chromium Alloys Hardened with Titanium – Discussion |
|
| Solidification of Aluminum-Rich Aluminum-Copper Alloys – Discussion |
|
| Constitution and Properties of Ag-Cu-Zn Brazing Alloys – Discussion |
|
| Investigation of the Heat Treatment of Commercial Titanium-Base Alloy – Discussion |
|
| Hydrogen Embrittlement of Steels – Discussion |
|
| A Study of the Effect of Carbon Content on the Structure and Properties of Sintered WC-Co Alloys – Discussion |
|
| Solid State Bonding of Aluminum to Nickel – Discussion |
|
| High Temperature Strength of Wrought Aluminum Powder Products – Discussion |
|
| Drift of Things |
Cohan, A. S. |
| Vacuum Melting Improves Alloy Properties and Workability |
McKechnie, R. – Green, D. – Moore, W. |
| Promises and Problems Posed by Vacuum Melting |
Moore, J. |
| Bright Future Predicted For Vacuum Melted Metals in |
Mahla, E. M. |
| Electric Furnace Melting Practices Compared for High Alloy |
Gouwens, P. R. |
| How One Company Appraises Management Development |
Reistle, C. E. |
| Carbon and Graphite Electrodes Evaluated for Use in Ferroalloy |
Hogue, R. – Westlake, R. – Moga, G. |
| Sampling Liquid Steel for Oxygen Content: A Further Evaluation of the Bomb Technique |
Gilbert, S. – Bailey, G. |
| Ionic Nature of Liquid Iron-Silicate Slags |
Simnad, M. – Derge, G. – George, I. |
| Inclusions in Steel from Pouring Refractories |
Carney, D. – Rudolphy, E. |
| Analysis of Factors that Limit the Production Rate and Coke Rate in the Iron Blast Furnace |
Philbrook, W. O. |
| Evidence for Order in the Mn-Mo Sigma Phase |
Decker, B. – Waterstrat, R. – Kasper, J. |
| Developments in the Carbonate Processing of Uranium Ores |
Forward, F. A. – Halpern, J. |