|
Title
|
Author
|
| Drift of Things |
Robie, E. H. |
| Melting Low Carbon Stainless Steel |
Crafts, Walter – Rassbach, H. P. |
| Slag Pocket Cleanouts Speeded by Removable Open Hearth Bulkhead Doors |
Over, Ray E. |
| Hot Pressing Silver Powder |
Ogawa, K – Matsumura, G. |
| Vacuum Impregnation of Castings |
Hull, L. W. |
| Heats of Formation of Sodium-Tin Alloys Determined With a New High Temperature Colorimeter |
McKisson, R. L. – Bromley, L. A. |
| Constitution of the System Gallium-Indium |
Denny, J. P. – Hamilton, J. H. – Lewis, J. R. |
| Secondary Recrystallization Texture in Copper |
Sharp, M. – Dunn, C. G. |
| Solidification Mechanism of Steel Ingots |
Bishop, H. F. – Brandt, F. A. – Pellini, W. S. |
| Constitution and Properties of Some Iron-Bearing Cupro-Nickels |
Palmer, E. W. – Wilson, F. H. |
| Volatility and Stability of Metallic Sulphides |
Hsiao, C. M. – Schlechten, A. W. |
| Crystal Structure of TiAl |
Duwez, Pol – Taylor, J. L. |
| Crystal Structure of TaCr2 and CbCr2 |
Duwes, Pol – Martens, H. |
| A Sensitive Method for Thermal Analysis of Very Low Melting Alloys |
Evans, R. M. – Fromm, E. O. – Jaffee, R. I. |
| Rolling Textures in Face-Centered Cubic Metals |
Hu, Hsun – Sperry, P. R. – Beck, P. A. |
| Method for Locating Two-Liquid Immiscibility Limits |
Bish, R. E. |
| Annealing Textures in Rolled Face-Centered Cubic Metals |
Beck, P. A. – Hsun, Hu |
| On the Solution of Diffusion Problems Dependent Diffusion Coefficients |
Wagner, Carl |
| Drift of Things |
Robie, E. H. |
| A Survey of Zebra Roof Practice |
Grigsby, C. E. |
| Rapid Analysis of Boron in Alloys |
Blumenthal, H. |
| Progress Report: Low Shaft Blast Furnace |
|
| Vanadium-Base Alloys |
Wilson, William |
| Vanadium-Oxygen Solid Solutions |
Seybolt, A. – Sumsion, H. |
| Studies on the Kinetics of Transformation in Titanium Base Alloys |
Rostker, W. |
| Mechanism of Plastic Flow in Titanium |
Rosi, F. D. – Dube, C. A. – Alexander, B. H. |
| Dimensional Changes Normal to the Diffusion Direction |
Balluffi, R. – Alexander, B. |
| Embrittlement of High Chromium Ferritic Stainless Steels at 475°C |
Lena, A. J. – Hawkes, M. F. |
| Diffusion in Iron Oxides |
Himmel, L. – Mehl, R. – Birchenall, C. |
| Deformation of Ferrite Single Crystals |
Vogel, F. L. – Brick, R. M. |
| Slip & Twinning in Single Crystals of Beryllium |
Lee, H. T. – Brick, R. M. |
| Solid Solubility of Boron in Iron |
Nicholson, M. E. |
| The System Molybdenum-Boron |
Steinitz, R. |
| Anelastic Studies of the Effects of Nitrogen in Molybdenum |
Maringer, R. – Muehlenkamp, G. T. |
| Orientation Relationships in Cast Germanium |
Ellis, W. C. – Fageant, Jacqueline |
| Distribution of Solute Element's Between Liquid and Solid Germanium |
Struthers, J. D. – Theurer, H. C. – Buehler, E. – Burton, J. |
| Orientations In Annealed, Very Large-Grained Aluminum |
Treuting, R. G. – Ellis, W. C. |
| One and Two Dimensional Sections of Three Dimensional Structures |
Smith, C. S. – Guttman, L. |
| Principles of Zone-Melting |
Pfann, W. G. |
| Intercrystalline Failure of Metals at Elevated Temperatures |
Shepard, O. C. |
| General Aspects of Metallic Binary Phase Diagrams |
Oriani, R. A. |
| Effect of Cold Deformation and Annealing on Young's Modulus of Metals |
Fine, M. E. – Kenney, N. T. |
| The Influence of Solute Atoms on Crystallographic Texture And Creep Properties |
Corey, C. L. |
| Generation of Porosity During Diffusion |
Balluffi, R. – Alexander, B. |
| Low Melting Gallium Alloys |
Evans, R. M. – Jaffee, R. I. |
| Cast Molybdenum of High Purity |
Rengstorff, G. W. P. – Fischer, R. B. |
| Internal Friction Measurements on Iron Wires of Commercial Purity |
Josefsson, Ake – Kula, Eric |
| Twinning in Silicon |
Salkovitz, E. I. – von Batchelder, F. W. |
| Tensile Properties of Wrought Austenitic Manganese Steel in the Temperature Range from 100° to -196°C |
Doepken, H. C. |
| Silicon-Oxygen Equilibrium in Liquid Iron |
Gokcen, N. A. – Chipman, J. |
| Growth of Austenite in Cold-Rolled Tempered Martensite |
Nehrenberg, A. E. |
| Dislocation Collision and the Yield Point of Iron |
Holden, A. N. |
| Kinetics and Orientation Relationships of Secondary Recrystallization in Silver |
Rosi, F. D. – Alexander, B. H. – Dube, C. A. |
| Effect of Cold Work and Annealing on the Thermoelectric Power of Molybdenum |
Kittel, J. H. |
| Delay Time for the Initiation of Slip in Metal Single Crystals |
Kramer, I. R. – Maddin, R. |
| Diffraction Patterns and Crystal Structure of Si3N4 and Ge3N4 |
Leslie, W. C. – Carroll, K. G. – Fisher, R. M. |
| Effect of Temperature on the Lattice Parameters of Mg Alloys |
Busk, R. S. |
| Observations on the Occurrence of Ti2X Phases |
Rostaker, W. |
| Crystal Structure of Ti3Sn |
Pietrokowsky, Paul |
| Observations on the Lattice Parameters of the Alpha Solid Solution in the Ti-Al System |
Rostaker, W. |
| Mechanism of the Reduction of Oxides and Sulphides to Metals |
Wagner, C. |
| Drift of Things |
Robie, E. H. |
| Magnesium-Rare Earth Casting Alloys |
McDonald, J. C. |
| Titanium Alloys in Stainless Steel Production |
St. Vincent, F. – Rebholz, R. |
| Properties of Some Bottom Ramming Materials |
Fedock, M. P. |
| Hydrogen Reduction of Iron Ore |
Scharschu, C. A. |
| India's Iron & Steel Industry |
|
| Equilibrium Between Blast- Furnace Metal and Slag as Determined by Remelting |
Filer, E. W. – Darken, L. S. |
| Isothermal Martensite Formation in an Iron-Chromium-Nickel Alloy |
Kulin, S. A. – Speich, L. S. |
| Origin of Recrystallization Textures |
Burke, J. E. |
| Time- Temperature- Transformation Characteristics of Titanium-Molybdenum Alloys |
DeLazaro, D. J. – Hansen, M. – Riley, R. E. – Rostoker, W. |
| Extent of Strain of Primary Glide Planes in Extended Single Crystalline Alpha Brass |
Maddin, R. |
| Solubility of Carbon and Oxygen in Molybdenum |
Few, W. E. – Manning, G. K. |
| Influence of Carbon on the Lattice Parameter of Molybdenum |
Speiser, R. – Spretnak, J. W. – Few, W. E. – Parke, R. M. |
| Relation Between the Volume of Martensite and the Number of Martensite Plates per Unit Volume |
Machlin, E. S. |
| Preferred Orientation of Arc-Cast Molybdenum Sheet |
Semchyshen, M. – Timmons, G. |
| Properties of Magnesium-Thorium and Magnesium-Thorium-Cerium Alloys |
Leontis, T. E. |
| Plastic Deformation of Magnesium Single Crystals |
Burke, E. C. – Hibbard, W. R. |
| Zirconium-Chromium Phase Diagram |
Hayes, E. T. – Roberson, A. H. – Davies, M. H. |
| On the Mechanism of Precipitation in Copper- Beryllium Alloys |
Geisler, A. H. – Mallery, J. H. – Steigert, F. E. |
| Drift of Things |
Robie, E. H. |
| Ensley's High Pressure Turbo- Blowers Increase Production, Decrease Coke Rates |
Shannon, J. J. |
| Manganese: Sources and Beneficiation |
|
| Conserve Diamond Bort and Cut Hard-To-Machine Materials with New Machining Processes |
|
| Isothermal Transformation Characteristics of on Titanium |
Phillips, C. W. – Frey, D. N. |
| Use of Etch Figures for Micrographic Investigations of Commercially Pure Aluminum and Aluminum Alloys |
Herenguel, Jean |
| Sintered Titanium Carbide |
Glaser, F. W. – Ivanick, W. |
| Contribution to the Metal-Carbon-Boron System |
Glaser, F. W. |
| Lead- Uranium System |
Teitel, R. J. |
| Viscous Creep of Gold Wires Near the Melting Point |
Buttner, F. H. – Funk, E. R. – Udin, H. |
| Measurement of Self- Diffusion Coefficients by Autoradiography |
Gatos, H. C. – Azzam, Ahmed |
| Origin of Porosity in Castings of Magnesium-Aluminum and Other Alloys |
Whittenberger, E. J. – Rhines, F. N. |
| Magnetic Behavior of Intermediate Phases in Alloys of Transition Elements |
Beck, P. A. |
| Drift of Things |
Robie, E. H. |
| Production at Garfield Smelter |
Thompson, R. |
| Fe-Ni-Co Alloys for Glass to Metal Seals |
Mairs, K. H. |
| Open Hearth Rebuild Program Increases Furnace Availability |
Walton, J. L. – Dague, J. O. |
| Manganese for the Steel Industry |
Baulger, F. W. – Buehl, R. C. |
| Chromium Carbide in- Stainless Steel-Howe Memorial Lecture |
Kinzel, A. B. |
| Isothermal Mode of the Martensitic Transformation |
Machlin, E. S. – Cohen, M. |
| Recrystallization of Aluminum Single Crystals After Plastic Extension |
Chen, N. K. – Mathewson, C. H. |
| Powder Metallurgy of Zirconium – Discussion |
|
| Grain Structure of Aluminum-Killed, Low Carbon Steel Sheets – Discussion |
|
| Theory of Grain Boundary Migration Rates – Discussion |
|
| Secondary Recrystallization in Copper Wire – Discussion |
|
| Systems Titanium-Molybdenum and Titanium-Columbium – Discussion |
|
| Solidification of Lead-Tin Alloy Droplets – Discussion |
|
| Constitution and Precipitation-Hardening Properties of Copper-Rich Copper-Tin-Beryllium Alloys – Discussion |
|
| Rapid Tempering of High Speed Steel – Discussion |
|
| Effect of Rate of Cooling on the Alpha-Beta Transformation in Titanium and Titanium-Molybdenum Alloys – Discussion |
|
| Burst Phenomenon in the Martensitic Transformation – Discussion |
|
| Isothermal Formation of Martensite at Subzero Temperatures in a High Chromium Steel – Discussion |
|
| Isothermal Transformation and Properties of a Commercial Aluminum Bronze – Discussion |
|
| Intermediate Phases in Ternary Alloy Systems of Transition Elements – Discussion |
|
| Chromium-Nickel Phase Diagram – Discussion |
|
| Effects of Tungsten or Molybdenum Upon the Alpha-Beta Transformation and Gamma Precipitation in Cobalt-Chromium Alloys – Discussion |
|
| Structural Studies of Plastic Deformation in Aluminum Single Crystals – Discussion |
|
| Effect of Alloying Elements on the Elevated Temperature Plastic Properties of Alpha Solid Solutions of Aluminum – Discussion |
|
| Effect of Alloying Elements on the Electrical Resistivity of Aluminum Alloys – Discussion |
|
| Creep Characteristics of Some Platinum Metals at 1382°F – Discussion |
|
| Creep Behavior of Zinc Modified by Copper in the Surface Layer – Discussion |
|
| Creep and Stress Rupture Behavior of Aluminum as a Function of Purity – Discussion |
|
| Oxidation of Titanium – Discussion |
|
| On the Mechanism and Kinetics of the Scaling of Iron – Discussion |
|
| Role of Gases in the Production of High Density Powder Compacts – Discussion |
|
| Drift of Things |
Robie, E. H. |
| The Sterling Process |
Handwerk, E. C. – Mahler, G. T. – Fetterolf, L. D. |
| Hot Metal Mixer Linings At Columbia-Geneva Steel Div. |
Aikens, R. E. |
| Hot Metal Mixer Linings At Clairton Works |
Smith, F. R. |
| New Chemical Method Produces Nickel, Cobalt, Copper Metallics |
|
| Foreign Ores as Open Hearth Charge Ores: Liberian Ore |
Carpenter, R. P. |
| Foreign Ores as Open Hearth Charge Ores: Moroccan Ore |
Benton, C. C. |
| MPA Holds Eighth Annual Meeting in Chicago |
|
| Recrystallization of Tantalum |
Wensch, G. W. – Bruckart, K. B. – Deibler, R. H. |
| Activity of Sulphur in Liquid Iron and Steel |
Sherman, Charles W. – Chipman, John |
| Diffusion and Precipitation of Carbon in Some Alloys of Iron |
Wert, Charles |
| Solid Solubility of Sulphur in Iron |
Rosenqvist, Terkel – Dunicz, B. L. |
| Titanium-Aluminum System |
Bumps, E. S. – Kessler, H. D. – Hansen, M. |
| Compression Texture of Iodide Titanium |
Williams, D. N. – Eppelsheimer, D. S. |
| Observations of Creep of the Grain Boundary in High Purity Aluminum |
Chang, H. C. – Grant, N. J. |
| Melting Point and Transformation of Pure Chromium |
Bloom, D. S. – Putnam, J. W. – Grant, N. J. |
| Partial Titanium-Vanadium Phase Diagram |
Pietrokowsky, Paul – Duwez, Pol |
| Crystal Structure of ZrB12 |
Post, Benjamin – Glaser, F. |
| Effect of Zirconium on Magnesium-Thorium and Magnesium-Thorium-Cerium Alloys |
Leontis, T. E. |
| Optical Temperature Scale and Emissivities of Liquid Iron-Copper-Nickel Alloys |
Smith, D. B. – Chipman, John |
| Transformation in Cobalt-Nickel Alloys |
Hess, J. B. – Barrett, C. S. |
| Effect of Prior Strain at Low Temperatures on the Properties of Some Close-Packed Metals at Room Temperature |
Ellis, W. C. – Greiner, E. S. |
| Deformation of Zinc Bicrystals by Thermal Ratcheting |
Burke, J. E. – Tukalo, Anna M. |
| Melting of Undoped Silicon Ingots |
Stauss, H. E. – Hino, J. |
| Surface Areas of Metals and Metal Compounds: A Rapid Method of Determination |
Orr, C. – Blocker, H. G. – Craig, S. L. |
| Crystallographic Angles for Titanium and Zirconium |
McHargue, Carl J. |
| Effect of Applied Stress on the Martensitic Transformation |
Kulin, S. A. – Cohen, Morris, Averbach, B. L |
| Drift of Things |
Robie, E. H. |
| Conservation of and/or Substitution for Critical Jet Engine Materials |
Promisel, N. E. |
| Oxygen in Steelmaking |
Girardi, D. J. – Hilty, D. C. |
| Physical Conditions in the Combustion and Smelting Zones of a Blast Furnace |
Elliott, J. F. – Buchanan, R. A. – Wagstaff, J. B. |
| Distribution of Manganese and Oxygen Between Molten Iron and FeO-MnO-Si02 Slags |
Bell, H. B. – Murad, A. B. – Carter, P. T. |
| Thermodynamics of Iron-Silicate Slags; Slags Saturated with Solid Silica |
Michal, E. J. – Schuhmann, R. |
| Deleading Zinc Concentrate at the Parral and Santa~ Barbara Mills |
Boeke, C. L. – Gunther, G. G. |
| Chlorination of Zirconium Oxide |
Stephens, W. W. – Gilbert, H. |
| Observations on Nodular Graphite |
Weld, H. M. – Cunningham, R. L. – Boswell, F. W. C. |
| Observations on the Tension Texture of Aluminum |
Calnan, E. A. – Williams, Betty |
| Preferred Orientations in Vanadium |
McHargue, C. J. – Hammond, J. P. |
| Principles of Zone-Melting |
Pfann, W. G. |
| Recrystallization Textures in Copper Wire |
Bassi, G. |
| A Study of Grain Shape in an Aluminum Alloy and Other Applications of Stereoscopic Microradiography |
Williams, W. M. – Smith, C. S. |
| Titanium-Copper Binary Phase Diagram |
Joukainen, A. – Grant, N. J. – Floe, C. F. |
| Effect of Molybdenum and of Nickel on the Rate of Nucleation and the Rote of Growth of Pearlite |
Parcel, Wayne – Mehl. R. F. |
| Drift of Things |
Robie, E. H. |
| Hot Patching Practice at McGill Smelter |
Pesout, Edward |
| Silicon Limits Oxygen Utilization in Iran for Carbon and Silicon Removal |
Lysobey, W. R. |
| Raw Material Outlook Good for Western Steelmaking |
Sargis, S. G. |
| Electronics Applied to Machining Hard Metals |
|
| Hot Rolling Behavior of Resulphurized Steels Improved with Manganese Sulphide Additions |
Feigenbaum, S. |
| Scrap Handling Program Speeds Furnace Charging |
Bowers, W. F. |
| Solid State Physics in Electronics and in Metallurgy |
Shockley, W. |
| Observations on the Preparation of Iodide Titanium |
Runnalls, O. J. C. – Pidgeon, L. M. |
| Titanium-Chromium Phase Diagram |
Cuff, F. B. – Grant, N. J. – Floe, C. F. |
| Scaling of Lead in Air |
Weber, Elmer – Baldwin, W. |
| Self- Diffusion in Alpha Iron Under Uniaxial Compressive Stress |
Buffington, F. S. – Cohen, Morris |
| Segregation of Two Solutes, With Particular Reference to Semiconductors |
Pfann, W. G. |
| Observations on Twinning in Semicontinuous Cast Aluminum |
Aust, K. T. – Krili, F. M. – Morral, F. R. |
| Concentration Dependence of Diffusion Coefficients in Metallic Solid Solution |
Thomas, D. E. – Birchenall, C. E. |
| Effect of Simultaneous Strain on Subgrain Growth |
Hino, Jun – Shewman, P. G. – Beck, P. A. |
| Surface Effects in the Slip and Twinning of Metal Monocrystals |
Gilman, J. J. – Read, T. A. |
| Decarburization of High Carbon Cobalt Metal |
Dismant, J. H. – Hamilton, J. H. – Fassell, W. M. – Lewis, J. R. |
| Drift of Things |
Robie, E. H. |
| Monterrey Refinery Uses Continuous Lead Softening and Desilverizing Process |
Ross, G. – Peabody, S. A. |
| Steel Mill Instrumentation Improves Production and Quality |
Heinzinger, L. W. |
| B&W's Giant Press Forms Heavy Plate, Pierces Ingots For Hollow Forgings |
|
| Powder Metallurgists at Austrian Seminar Discuss New Sintered Aluminum Powder Tungsten and Molybdenum Silicides |
|
| AIME Fall Meeting at Centennial of Engineering |
|
| Many Mechanisms at Work Producing Grain Refinement in Light Metals |
Bernstein, Harold |
| Use of Oxygen in the Bessemer Converter |
Rogers, W. T. – Sonchez, L. |
| Effect of Manganese on the Activity of Sulphur in Liquid Iron and Iron-Carbon Alloys |
Morris, J. P. |
| Heats of Solution of the Group IB Metals in Liquid Tin |
Ticknor, L. B. – Bever, M. B. |
| Influence of Chemical Composition on the Rupture Properties at 1200°F of Wrought Cr-Ni-Co-Fe-Mo-W-Cb Alloys |
Freeman, J. W. – White, A. E. |
| Creep Correlations in Alpha Solid Solutions of Aluminum |
Sherby, Oleg D. – Dorn, John |
| Some Observations of Subgrain Formation During Creep in High Purity Aluminum |
Servi, Italo – Norton, John – Grant, N. J. |
| Recrystallization Kinetics of Low Carbon Steel |
Reiter, Stanley F. |
| Do Metals Recrystallize? |
Beck, Paul A. |
| Observations on the Lattice Parameters of the Alpha and TiO Phases in the Titanium-Oxygen System |
Rostoker, W. |
| System Molybdenum-Boron and Some Properties of the Molybdenum-Borides |
Steinitz, Robert – Binder, Ira – Maskowitz, David |
| Note on the Effect of Oxygen and Nitrogen on the Hardness and Parameter of High Purity Vanadium |
Beatty, S. |
| Drift of Things |
Robie, E. H. |
| Properties of Cast Steels Improved with Rare Earth Element Additions |
Lillieqyist, G. A. – Mickelson, C. G. |
| Bethlehem Forges Giant Rotor Disks |
|
| Nonferrous Metals Engineer Faces Challenge After Century of Progress |
Diamond, R. W. – Sutherland, B. P. |
| New Process Permits Many Metals to Be Tungsten Carbide Coated |
|
| Watertown Arsenal Testing Machine Has 72 Years History of Service |
|
| Research In Progress-Abstracts of IMD Fall Meeting Papers |
|
| Tungsten-Cobalt-Carbon System |
Rautala, Pekka – Norton, J. T. |
| Strain Sensitivity of Commercial Purity Titanium |
Wyatt, J. L. |
| Role of the Binder Phase in Cemented Tungsten Carbide-Cobalt Alloys |
Gurland, Joseph – Notron, J. T. |
| High Temperature Oxidation of Some Iron-Chromium Alloys |
Caplan, D. – Cohen, M. |
| On the Reversal of the Strain-Induced Martensitic Transformation in the Copper- Zinc System |
Reynolds, J. E. – Bever, M. B. |
| Strain Patterns in Charpy Impact Specimens of 0.20 Pet C Mild-Steel |
Bumps, E. S. |
| Diffusion of Silicon in Iron |
Batz, W. – Mead, H. W. – Birchenall, C. E. |
| Intermediate Phases in the Mo-Fe-Co, Mo-Fe-Ni, and Mo-Ni-Co Ternary System |
Das, D. K. – Rideout, S. P. – Beck, P. A. |
| Kinking in Zinc Single-Crystal Tension Specimens |
Washburn, Jack – Parker, E. R. |
| Copper-Zinc Constitution Diagram, Redetermined in the Vicinity of the Beta Phase by Means of Quantitative Metallography |
Beck, L. H. – Smith, C. S. |
| Formation of Nitrides from Atmospheric Exposure During Creep Rupture of 18 Pct Cr-8 Pct Ni Steel |
Dulis, E. J. – Smith, G. V. |
| Dynamic Formation of Slip Bonds in Aluminum |
Chen, N. K. – Pond, R. B. |
| Mechanical Properties of Intermetallic Compounds at Elevated Temperatures |
Lowrie, Robert |
| Drift of Things |
Robie, E. H. |
| Germanium, Produced As a Byproduct, Has Become of Primary Importance |
Thompson, A. P. – Musgrave, J. R. |
| Small Additions Raise Strength of Zirconium at Elevated Temperatures |
Schwope. A. D. – Chubb, W. |
| The Paley Report: Manganese |
|
| Ductile Iron Combines Properties of Cast Iron, Malleable Iron, Steel |
|
| Zebra Roof Experience Analyzed By Survey of Open Hearth Shops |
Harley, T. H. |
| Material Selection Factor Significant in Bourdon Tubes |
Giacobbe, J. B. – Bounds, A, M. |
| Electrolytic Zinc Plant at Monsanto, III |
Moore, T. I. – Painter, L. A. |
| An Aid for Making Stereographic Plots When Working With Cubic Crystals |
Goldberg, Colman |
| Sampling of Liquid Steel for Dissolved Oxygen |
Huff, G. F. – Bailey, G. R. – Richards, J. H, |
| A Corrected CO/CO2 Ratio for Blast Furnaces – Discussion |
|
| Distribution of Manganese and Oxygen Between Molten Iron and FeO-MnO-SiO2 Slags – Discussion |
|
| Silicon-Oxygen Equilibrium in Liquid Iron – Discussion |
|
| Relationships Between Germanium and Cadmium in the Electrolysis of Zinc Sulphate Solutions – Discussion |
|
| Volatility and Stability of Metallic Sulphides – Discussion |
|
| Mechanism of the Reduction of Oxides and Sulphides to Metals – Discussion |
|
| Observations on the Preparation of Iodide Titanium – Discussion |
|
| Deleading Zinc Concentrate at the Parral and Santa Barbara Mills – Discussion |
|
| Low Melting Gallium Alloys – Discussion |
|
| Solidification Mechanism of Steel Ingots – Discussion |
|
| Model for Dendrite Growth Form in Metals and Alloys – Discussion |
|
| Origin of Porosity in Castings of Magnesium-Aluminum and Other Alloys – Discussion |
|
| Mechanism of Grain Refinement in Aluminum Alloys – Discussion |
|
| On the Mechanism of Precipitation in Copper-Beryllium Alloys – Discussion |
|
| Metallurgical Mechanism for Mercury Stress Cracking of Copper Alloys – Discussion |
|
| Preferred Orientation in Zirconium – Discussion |
|
| Preferred Orientation of Arc-Cast Molybdenum Sheet – Discussion |
|
| Plasticity of Molybdenum Single Crystals – Discussion |
|
| Plastic Deformation of Magnesium Single Crystals – Discussion |
|
| Delay Time for the Initiation of Slip in Metal Single Crystals – Discussion |
|
| Diffraction Patterns and Crystal Structure of Si3N4 and Ge3N4 – Discussion |
|
| Habit Phenomenon in the Martensitic Transformation – Discussion |
|
| Isothermal Martensite Formation in an Iron-Chromium-Nickel Alloy – Discussion |
|
| Isothermal Transformation Characteristics of an Iron-Chromium Alloy of Titanium – Discussion |
|
| Work Hardening-Reannealing Cycle of Pure Silver – Discussion |
|
| Kinetics and Orientation Relationships of Secondary Recrystallization in Silver – Discussion |
|
| Dislocation Collision and the Yield Point of Iron – Discussion |
|
| Effect of Prior Strain at Low Temperatures on the Properties of Some Close-Packed Metals at Room Temperature – Discussion |
|
| Analytical Representation of Certain Phase Boundaries – Discussion |
|
| Zirconium-Chromium Phase Diagram – Discussion |
|
| Constitution of Titanium-Aluminum Alloys – Discussion |
|
| Solubility of Gaseous Nitrogen in Gamma Iron and the Effect of Alloying Constituents-Aluminum Nitride Precipitation – Discussion |
|
| Constitution and Properties of Some Iron-Bearing Cupro-Nickels – Discussion |
|
| Viscous Creep of Gold Wires Near the Melting Point – Discussion |
|
| Vapor Pressures of Zinc Over AgZn Alloys – Discussion |
|
| Effect of Temperature on the Lattice Parameters of Magnesium Alloys – Discussion |
|
| Correlation Between Electrical Conductivity and Temperature Coefficient of Resistance of Solid-Solution Alloys – Discussion |
|
| Internal Friction Measurements on Iron Wires of Commercial Purity – Discussion |
|
| Drift of Things |
Robie, E. H. |
| Electric Smelting at Bureau of Mines Seeks Utilization of Northwest Ores |
Rasmussen, R. T. C. |
| Human Relations-For Improved Shop Performance |
Smith, R. |
| Autopour Makes Steel Pouring Easier, Safer, Better |
Hoby, T. |
| Substitute Chromium Sources Reduce Production Costs of Stainless Steel |
McFarlane, N. B. |
| Approach to Melting Reactive Metals Eliminates Use of Refractory Containers |
Magel, T. T. – Kulin, P. A. – Kaufmann, A. R. |
| Production of Spiegeleisen from Open Hearth Slog in an Experimental Blast Furnace |
Buehl, R. C. – Royer, M. B. |
| Production of High Manganese Slags by Selective Oxidation of Spiegeleisen |
Buehl, R. C. – Royer, M. B. |
| Effect of a Prequench on the Martensite Reaction in Tool Steel |
Gilman, J. A. |
| Lead Blast Furnace Gas Handling and Dust Collection |
Bainbridge, R. |
| Liquidus Surface of the Fe-S-O System |
Hilty, D. C. – Crafts, W. |
| Determination of Oxygen in Iron in the Presence of Sulphur by the Vacuum-Fusion Method |
Hamner, H. L. – Fowler, R. M. |
| Relative Diffusion Rates of Zinc and Copper in Alpha Brass |
Balluffi, R. W. – Alexander, B. H. |
| Nature of the Line Markings in Titanium and Alpha Titanium Alloys |
Craighead, C. M. – Lenning, G. A. – Jaffee, R. I. |
| Thermodynamic Properties of Solid Nickel-Gold Alloys |
Seigle, L. L. – Cohen, M. – Averbach, B. L. |
| Modifications of an X-ray Method for the Measurement of Retained Austenite Concentrations in Hardened Steels |
Beu, K. E. |
| Microconstituents in Chromium Base Chromium-Iron-Molybdenum Alloys and Their Behavior with Heat Treatment |
Hammond, J. R. – Westerman, A. B. – Cross, H. C. |
| Increase of High Magnetostriction by Magnetic Anneal |
Stauss, H. E. – Sandoz, G. |
| Structure and Crystallography of Second Order Twins in Copper |
Sharp, M. – Dunn, C. G. |