Title
|
Author
|
Drift of Things |
Robie, E. H. |
Cobalt-A Report to Industry |
|
Minerals from the Sea |
Shigley, C. M. |
Alloy Steel Production in Large Basic Furnaces |
Blough, A. K. |
Industrial Hygiene at American Smelting and Refining Co. |
Abersold, John N. – Nelson, K. W. |
Solution Loss and the Reducing Power of Blast Furnace Gas |
Joseph, T. L. |
Martensite Transformation in Lithium |
Bowles, J. S. |
Plastic Deformation and Diffusionless Phase Changes in Metals-The Au-Cd Beta Phase |
Chang, L. C. – Read, T. A. |
Atomic Relationships in the Cubic Twinned State |
Ellis, W. C. – Treuting, R. G. |
Transitions in Chromium |
Fine, M. E. – Greiner, E. S. – Ellis, W. C. |
Effect of Heat Treatment on the Electrical Properties of Germanium |
Theuerer, H. C. – Scaff, J. H. |
Grain Boundary Effect in Surface Tension Measurement |
Udin, Harry |
Crystallographic Angles for Mg, Zn, and Cd |
Salkovitz, Edward I. |
Drift of Things |
Robie, E. H. |
Gallium-A Byproduct Metal |
Thompson, A. P. – Harner, H. R. |
Diffusion Phenomena Occurring During Sintering |
Alexander, B. H. |
Age Hardening |
Mondolfo, L, F. |
New Refractory Hung Arch Reduces Furnace Failures |
|
Crusher Plates for Diamonds |
Young, R. S. |
Recent Developments in Fluxes for Welding |
Conn, W. M. |
Electric Furnace Roof Refractories |
Blackwell, T. A. |
Observations on Rimming Steel Ingots |
Hultgren, A. – Phragmen, G. – Wohlfahrt, S. – Ostberg, J. E. |
Vanadium-Oxygen Equilibrium in Liquid Iron |
Chipman, J. – Dastur, M. N. |
"Oriented Growth" in Primary Recrystallization |
Becker, J. J. |
Sintering Practice at Josephtown Smelter |
Najarian, H. K. – Peterson, K. F. – Lund, R. E. |
Aging of Sand-Cast Mg-AI-Zn Alloys |
Leontis, T. E. – Nelson, C. E. |
Mechanical Properties of Stainless Steel Powder |
Grobe, A. H. – Roberts, G. A. |
Preparation of Titanium Tetrachloride from Rutile |
Gorski, C. H. |
Reverse Leaching of Zinc Calcine |
Davidson, L. P. – Carpenter, R. K. – Tschirner, H. J. |
Metallurgical Reactions of the Fluorides |
Kellogg, H. H. |
Cobalt Self-Diffusion: Study of Method of Decrease in Surface Activity |
Ruder, R. C. – Birchenall, C. E. |
Formation and Behavior of Subboundaries in Silicon Iron Crystals |
Dunn, C. G. – Daniels, F. W. |
Interface and Marker Movements in Diffusion in Solid Solutions of Metals |
da Silva, L. C. C. – Mehl, R. F. |
Effect of Ternary Additions on the Age-Hardening of a Copper-Silver Alloy |
Margolin, H. – Hibbard, W. R. |
Drift of Things |
Robie, E. H. |
New Machining Method |
Cohan, Alvin S. |
Redesigning a Secondary Smelting Plant |
Marble, Earl R. |
Continuous Casting of Steel at Babcock & Wilcox Tube Co. |
Harter, Isaac |
Some Observations on the Continuous Casting of Steel |
Rossi, Irving |
EI Paso Refinery of Phelps Dodge Refining Corp. |
Kunkle, B. B. |
Sulphur Activities in Liquid Copper Sulphides |
Schuhmann, R. – Moles, O. W. |
Microscopic Observation of the Solidification of Cu-Ni Alloy Droplets |
Cech, R. E. – Turnbull, D. |
Solubility of Hydrogen in Molten Lead |
Opie, W. R. – Grant, N. J. |
Re-Solution of Precipitated Silver in Cu-Ag Alloys |
Margolin, H. – Hibbard, W. |
Fractographic Pattern of 475°C Embrittlement in Stainless Steel |
Zapffe, C. A. |
Structure of Spherulites in Nodular Cast Iron |
Stauss, H. E. – Van Batchelder, F. W. – Salkovitz, E. I. |
Deformation and Recrystallization Texture of Cold-Drawn OFHC Cu Wire |
Backofen, W. A. |
Intergranular Energy of Fe and Some Fe Alloys |
Van Vlack, L. H. |
Precipitation and Diffuse Scattering in an Fe-Mo-Co Alloy |
Geisler, A. H. – Steigert, F. E. |
Drift of Things |
Robie, E. H. |
Quenching and Digging Out a Blast Furnace |
McCutcheon, K. – Marshall, W. – Barnes, H. |
Sintering Nonferrous Metals |
Nilsen, A. A. – Urban, W. J. |
Desulphurizing Molten Iron with Calcium Carbide |
Baumer, S. D. – Hulme, P. M. |
Distribution of Sulphur Between Liquid Iron and Slags of Low Iron-Oxide Concentrations |
Rocca, R. – Grant, N. – Chipman, J. |
Vacuum Treatment of Parkes' Process Crusts on a Pilot-Plant Scale |
Schlechten, A. – Doelling, R. |
Constitution of Fe-Cr-Mo Alloys at 1200°F |
Baen, S. R. – Duwez, Pol |
Titanium-Boron Alloys |
Ogden, H. R. – Jaffee, R. I. |
Drift of Things |
Robie, E. H. |
Jet Tapping |
Walker, H. – Almeida, A. R. |
Safety Precautions in Jet Tapping |
Ferguson, R. H. |
Beryllium and Beryllium Alloys |
Richards, J. T. |
Production of Single Crystals of Metal |
Steinberg, M. |
Extraction of Alumina from Haiti and Jamaica Bauxites |
Tiemann, T. D. |
Structure of the Yellow Crystalline Fraction of Blast Furnace Salamander |
Weeks, J. R. – McLachlan, D. – Lewis, J. R. |
Effect of Alloying Elements on True-Stress True-Strain Flow Curves of Pearlitic Steel |
Raring, R. – Rinebolt, J. A – Harris, W. J. |
Thermodynamics of Iron-Silicate Slags: Slags Saturated With Gamma Iron |
Schuhmann, R. – Ensio, P. J. |
Some Notes on the Barley Shell Structure in Iron-Silicon Alloys |
Riley, R. V. |
Drift of Things |
Robie, E. H. |
Properties Influencing Wear of Metals |
Oberle, T. L. |
Extruding Copper and Brass |
Cotter, W. W. |
Statistical Analysis of Blast Furnace Production Data |
Leckie, D. S. |
Metallurgy of Cobalt Production from Cupriferous Pyrite |
Nakabe, S. |
Effects of Precompression on the Behavior of AI Alloy 24ST4 During Cyclic Direct Stressing |
Liu, S. I. |
Effect of Alloying Elements on the Electrical Resistivity of AI Alloys |
Robinson, A. T. – Dorn, J. E. |
Growth of Molybdenum Single Crystals |
Chen, N. K. – Maddin, R. – Pond, R. B. |
Relationships Between Germanium and Cadmium in the Electrolysis of Zinc Sulphate Solutions |
Ross, S. T. – Bray, J. L. |
Deformation Texture of Cold-Drawn Cu Wire |
Hibbard, W. R. |
Electric Furnace Melting of Copper at Baltimore |
Drummond, P. R. |
Metallographic Techniques for High Purity AI |
Servi, I. S. – Grant, N. J. |
Origin of the Cube Texture in Face-Centered Cubic Metals |
Beck, P. A. |
Theory of Annealing Textures |
Beck, P. A. |
Kinetics of Precipitation in Supercooled Solid Solutions |
Borelius, G. |
Drift of Things |
Robie, E. H. |
Sweden's Iron and Steel Industry |
Joseph, T. L. |
Control of Sulphur in Steelmaking |
Derge, G. – Marshall, S. |
Separation of Copper from Zinc by Ion Exchange |
Breton, E. J. – Schlechten, A. |
Ignition Temperatures of Magnesium and Magnesium Alloys |
Fassell. W. M – Gulbransen, L. B. – Lewis, J. R. – Hamilton, J. H. |
Rate of Sintering of Copper Under a Dead Load |
Rhines, F. N. – Cannon, H. S. |
Cleavage and Polygonization of Molybdenum Single Crystals |
Chen, N. K. – Maddin, R. |
Secondary Recrystallization in Copper Wire |
Bassi, G. |
Thermodynamic Study of the Reaction CaS + H2O = CaO + H2S and the Desulphurization of Liquid Metals with Lime |
Rosenqvist, T. |
Effect of Hardness on Temper Brittleness |
Buffum, D. C. – Jaffe, L. D. |
An Experimental Survey of Deformation and Annealing Processes in Zinc |
|
A Study of the Plastic Behavior of High-Purity Aluminum Single Crystals at Various Temperatures – Discussion |
|
A Study of Strain Markings in Aluminum – Discussion |
|
Activation Energy for Recrystallization in Rolled Copper – Discussion |
|
Recrystallization Reaction Kinetics and Texture Studies of a 50 Iron 50 Nickel Alloy – Discussion |
|
The Textures of Cold-Rolled and Annealed Titanium – Discussion |
|
Production and Examination of Zinc Single Crystals – Discussion |
|
The Structure of Intermediate Phases in Alloys of Titanium with Iron, Cobalt, and Nickel – Discussion |
|
On the Martensitic Transformation at Temperatures Approaching Absolute Zero – Discussion |
|
The Isothermal Transformation of a Eutectoid Beryllium Bronze – Discussion |
|
The Effect of Alloying Elements on the Plastic Properties of Aluminum Alloys– Discussion |
|
The Properties of Some Magnesium-Lithium Alloys Containing Aluminum and Zinc – Discussion |
|
The Effect of Sodium Contamination on Magnesium-Lithium Base Alloys – Discussion |
|
Hydrogen Embrittlement of SAE 1020 Steel – Discussion |
|
Aging Characteristics of Magnesium-Lithium Base Alloys – Discussion |
|
Hydrogen Solubility in Aluminum and Some Aluminum Alloys – Discussion |
|
Dendritic Crystallization of Alloys – Discussion |
|
Crystal Structure of V3Co |
Dewez, P. |
Drift of Things |
Robie, E. H. |
Open Hearth Charge Ore-Key to Steel Capacity Expansion |
Lindemuth, L. B. |
Secondary Aluminum Recovery in the South Pacific |
Franz, H, W. |
Nylon, A Factor in Stress Corrosion of Aluminum Bronze |
Silk, E. J. |
Oxygen in Acid Electric Steel Production |
Garrison, J. H. |
Ore Practice in Acid Electrics |
Stanley, F. J. |
Twenty-Five More Years of Metallography |
Vilello, J. R. |
Arc Melting of Titanium Metal |
Radtke, S. F. – Scriver, R. M. – Snyder, J. A. |
Powder Metallurgy of Zirconium |
Hausner, H. H. – Kalish, H. S. – Angier, R. P. |
Production of AI from Kalunite Alumina |
Fleischer, A. – Glosser, J. |
Intermetallic Compounds in the System Mo-Be |
Gordon, S. G. – McGurty, J. A. – Klein, G. E. – Koshuba, W. J. |
Thermal Stability of the Cr, Fe, and W Borides in Streaming Ammonia and the Existence of a New W Nitride |
Kiessling, R. – Liu, Y. H. |
Effect of Alloying Elements on the Elevated Temperature Plastic Properties of Alpha Solid Solutions of AI |
Sherby, O. D. – Anderson, R. A. – Dorn, J. E. |
Structural Studies of Plastic Deformation |
Chen, N. K. – Mathewson, C. H. |
Theory of Grain Boundary Migration Rates |
Turnbull, D. |
Effects of Mn and its Oxide on Desulphurization by Blast Furnace Type Slags |
Grant, N. J. – Kalling, U. – Chipman, J. |
Effect of Silica Reduction on the Desulphurizing Power of Blast Furnace Type Slags |
Grant, N. J. – Troili, O. – Chipman, J |
Desulphurizing Action of Titanium in Steels |
Fishel, W. P. – Roe, W. P. – Ellis, J. F. |
Electrolytic Probe for Underground Corrosion Studies |
Beck, W. |
Nickel, A Report to Industry |
Beall, J. V. |
European Research on Low Shaft Blast Furnace |
|
Grain Structure of Al-Killed, Low Carbon Steel Sheets |
Solter, R. L. – Beattie, C. W. |
Isothermal Formation of Martensite at Subzero Temperatures in a High Cr Steel |
Das Gupta, S. C. – Lement, B. S. |
Desulphurization of Pig Iron with Pulverized Lime |
Kalling, Ba – Danielsson, C. – Dragge, Ottar |
Kalling-Domnarfvet Process at Surahammar Works |
Fornander, Sven |
A Corrected CO/CO2 Ratio for Blast Furnaces |
Killian, S. T. |
Burst Phenomenon in the Martensitic Transformation |
Machlin, E. S. – Cohen, Morris |
Fundamental Effects of Cold Working on the Creep Resistance of an Austenitic Alloy |
Frey, D. N. – Freeman, J. W. |
Thermal Variation of Young's Modulus in Some Fe-Ni-Mo Alloys |
Fine, M. E. – Ellis, W. C. |
Effect of Rate of Cooling on the Alpha-Beta Transformation in Ti and Ti-Mo Alloys |
Duwez, Pol |
Crystal Structure of Ti5Si3, Ti5Ge3, and Ti5, Sn3 |
Pietrokowsky, P. – Duwez, Pol |
Role of Gases in the Production of High Density Powder Compacts |
Warren, D. – Libsch, J. F. |
Constitution and Precipitation-Hardening Properties of Cu-Rich Cu-Sn-Be Alloys |
Cresswell, R. A. – Cuthbertson, J. W. |
Lattice Parameter of InSb |
Liu, T. S. – Peretti, E.A. |
Creep Behavior of Zn Modified by Cu in the Surface Layer |
Pickus, M. R. – Parker, E. R. |
Equilibrium Relations In Mg-Al-Mn Alloys |
Nelson, B. J. |
Crystal Structure of UAI4 |
Borie, B. S |
Solidification of Pb-Sn Alloy Droplets |
Hollomon, J. H, - Turnbull, D. |
Creep Characteristics of Some Platinum Metals at 1382°F |
Atkinson, R. H. – Furman, D. E. |
Deformation Texture of Body-Centered Cubic Metal Wires |
Hibbard, W. R. – Roswell, A. E. – Schuetz, A. E. |
Drift of Things |
Robie, E. H. |
Through New Developments In Metallurgical Refractories |
Rochow, W. F. – McDowell, J. S. |
Tungsten |
Wang, C. Y. |
Rapid Analysis Methods in Steelmaking |
Arner, L. H. – Johnson, H. H. |
Powdered Metals in Electrical Contacts |
Beggs, R. K. |
Electronic Core Data Sheet |
|
Rapid Tempering of High Speed Steel |
Powers, A. E. – Libsh, J. F. |
Intermediate Phases in Ternary Alloy Systems of Transition Elements |
Rideout, S. – Manly, W. D. – Kamen, E. L. – Lement, B. S. – Beck, P. A. |
Oxidation of Titanium |
Davies, M. H. – Birchenall, C. E. |
Systems Ti-Mo and Ti-Cb |
Hansen, M. – Kamen, E. L. – Kessler, H. D. – McPherson, D. J. |
On the Mechanism and Kinetics of the Scaling of Iron |
Davies, M. H. – Simnad, M. T. – Birchenall, C. E. |
Effects of W or Mo upon the Alpha-Beta Transformation and Gamma Precipitation in Co-Cr Alloys |
Fletcher, E. E. – Elsea, A. R. |
Isothermal Transformation and Properties of a Commercial AI Bronze |
Kasberg. A. H. – Mack, D. J. |
Creep and Stress Rupture Behavior of AI as a Function of Purity |
Servi, I. S. – Grant, N. J. |
Structure Observations of AI Deformed in Creep at Elevated Temperatures |
Servi, I. S. – Grant, N. J. |
Solubility Relationships in Some of the Ternary Systems of |
Norton, J. T. – Mowry, A. L. |
High Temperature Oxidation of Cu-Pd and Cu-Pt Alloys |
Thomas, D. E. |
Plasticity of Mo Single Crystals |
Chen, N. K. – Maddin, R. |
Drift of Things |
Robie, E. H. |
Hot-Workability of Stainless Steel Improved by Adding Cerium and Lanthanum |
Post, C. B. – Schoffstall, D. G. – Beaver, H. O. |
Solid Solution Alloys of Mg with Li and In |
Hibbard, W. R. – Kearney, A. L. – Hawley, W. H. – Burke, E. C. |
Nonporous Refractory Coatings Permit Use of Mild Steel for High Temperature Applications |
|
Work Hardening-Reannealing Cycle of Pure Silver |
Balicki, M. – Leeds, G. |
Effect of Rare-Earth Metals on the Properties of Extruded Magnesium |
Leontis, T. E. |
Preferred Orientation in Zirconium |
McGeary, R. – Lustman, B. |
Grain Growth and Recrystallization Characteristics of Zirconium |
Dunkerly, F. J. – Pledger, F. – Damiano, V. – Fulton, J. |
Chromium-Nickel Phase Diagram |
Bloom, D. S. – Grant, N. J. |
Free Energy of Formation of Cementite and the Solubility of Cementite in Austenite |
Darken, L. S. – Gurry, R. W. |
Habit Phenomenon in the Martensitic Transformation |
Machlin, E. S. – Cohen, M. |
Metallographic Techniques for Austenite Grain Size of Steels in the As-Cast State |
Loria, E. A. |
Low Sulphur Steel from High Sulphur Raw Materials and Fuel |
Robertson, F. L. – Bacon, C. H. – Till, J. W. |
Sintering Practice at Josephtown Smelter – Discussion |
|
Arc Melting of Titanium Metal – Discussion |
|
Thermodynamics of Iron-Silicate Slags: Slags Saturated with Gamma Iron – Discussion |
|
Metallurgical Reactions of Fluorides – Discussion |
|
A Thermodynamic Study of the Reaction CaS + H20 = CaO + H2S and the Desulphurization of Liquid Metals with Lime – Discussion |
|
Effects of Manganese and Its Oxide on Desulphurization by Blast-Furnace Type Slags – Discussion |
|
Effect of Silica Reduction on the Desulphurizing Power of Blast-Furnace Type Slags – Discussion |
|
Distribution of Sulphur Between Liquid Iron and Slags of Low Iron-Oxide Concentrations – Discussion |
|
Desulphurizing Molten Iron with Calcium Carbide – Discussion |
|
Desulphurization of Pig Iron with Pulverized Lime and Kalling-Domnarfvet Process at Surahammar Works – Discussion |
|
Solution Loss and Reducing Power of Blast Furnace Gas – Discussion |
|
Oxygen in Liquid Open-Hearth Steel- Oxidation during Tapping and Ladle Filling – Discussion |
|
Metallographic Study of the Martensite Transformation in Lithium – Discussion |
|
Crystal Structures and Transformations in Indium-Thallium Solid Solutions – Discussion |
|
Crystallography of Cubic-Tetragonal Transformation in the Indium-Thallium System – Discussion |
|
Interface and Marker Movements in Diffusion in Solid Solutions of Metals – Discussion |
|
Torsion Texture of Copper – Discussion |
|
Effect of Ferrite Grain Structure Upon Impact Properties of 0.80 Pct. Carbon Spheroidite – Discussion |
|
Effect of Alloying Elements on True-Stress True-Strain Flow Curves of Pearlitic Steel – Discussion |
|
Transitions in Chromium – Discussion |
|
Lattice Parameters of Magnesium Alloys – Discussion |
|
Intergranular Energy of Iron and Some Iron Alloys – Discussion |
|
Formation of Annealing Twins – Discussion |
|
Atomic Relationships in the Cubic Twinned State – Discussion |
|
Graphite-Rod Hairpin-Resistor Radiation Furnace for High Temperatures – Discussion |
|
Ignition Temperatures of Magnesium and Magnesium Alloys – Discussion |
|
Mechanical Properties of Stainless Steel Powder – Discussion |
|
Rate of Sintering of Copper Under a Dead Load – Discussion |
|
Experiences With Chromite Hearths in Electric Furnaces |
Field, A. L. |
J&L Dedicates 2 Million Ton Open Hearth Shop |
|
Grinding Methods Evolved for Titanium |
|
Modern Trends in Electric Furnace and Transformer Design |
McCurdy, R. J. |
Recovery of Vanadium from Titaniferous Magnetite |
Cole, S. S. – Breitenstein, J. S. |
Low Grade Bauxites and Clays as Potential Aluminum Resources |
Kershner, K. K. – Funk, C. W. – Calhoun, W. A. |
Crystallographic Angles for Tin |
Nicholas, J. F. |
Mechanism of Grain Refinement in Aluminum Alloys |
Crossley, F. A. – Mondalfa, L. |
Constitution of Ti·Al Alloys |
Ogden, H. R. – Maykuth, D. J. – Finlay, W. L. – Jaffee, R. I. |
Model for Dendrite Growth Form in Metals and Alloys |
Pond, R. B. – Kessler, S. W. |
A Survey of the Sulphur Problem Through the Various Operations in the Steel Plant |
Browser, T. E. – Larsen, B. M. |
Useful Etchants for Electron Metallography |
Grube, W. L. |
Solubility of Gaseous Nitrogen in Gamma Iron and the Effect of Alloying Constituents-Aluminum Nitride Precipitation |
Darken, L. S. – Smith, R. P. – Filer, E. W. |
Change in Yield Strength During Aging in Iron |
Wert, C. A. |
Effect of Varying the Rate of Reduction on the Magnetic Properties, Ultimate Tensile Strength, and Resistivity of 18-8 Stainless Steel Wire |
Storchheim, S. |
Correlation Between Electrical Conductivity and Temperature Coefficient of Resistance of Solid· Solution Alloys |
Hansen, M. – Johnson, W. R. – Parks, J. M. |
Metallurgical Mechanism for Mercury Stress Cracking of Copper Alloys |
Robertson, W. D. |
Rate of Evaporation of Zinc at Low Pressures |
St. Clair, H. – Spendlove, M. |
Vapor Pressures of Zinc Over AgZn Alloys |
Underwood, E. E. – Averbach, B. L. |
Analytical Representation of Certain Phase Boundaries |
Rostoker, W. |
Surface Tension of Solid Silver |
Funk, E. R. – Udin, H. – Wulff, J. |
Surface Tension of Solid Gold |
Buttner, H. H. – Udin, H. – Wulff, J. |
Eutectoid Decomposition of the Delta Phase of the Cu-Sn System |
Wang, C. C. – Hansen, M. |