Title
|
Author
|
Titanium |
Gonser, Bruce W. |
Getting Your Money's Worth |
Rose, E. H. |
Water-Lowest Cost Industrial Mineral |
Hinds, Julian |
The Morenci Smelter Of Phelps Dodge Corporation At Morenci, Arizona |
McDaniel, L. L. |
The Interaction Of Liquid Steel With Ladle Refractories |
Post, Carl O. – Luerssen, George V. |
The Influence Of Temperature On The Affinity Of Sulphur For Copper, Manganese, And Iron |
Cox, E. M. – Bachelder, M. C. - Nachtrieb, N. H. - Skapski, A. S. |
Plastic Deformation Waves In Aluminum |
McReynolds, Andrew W. |
On The Structure Of Gold-Silver- Copper Alloys |
McMullin, John G. – Norton, John T. |
Stress And Strain States In Elliptical Bulges |
Chow, C. C. – Dona, A. W. – Sachs, G. |
A Study Of Textures And Earing Behavior Of Cold-Rolled (87-89 PCT) And Annealed Copper Strips |
Yen, Ming-Kao |
Use Of Electrical Resistance Measurements To Determine The Solidus Of The Lead-Tin System |
Hultgren, Ralph – Lever, Stanley A. |
Controlled Grain Growth Applied To The Problem Of Grain Boundary Energy Measurements |
Dunn, C. G. |
Plan For East Coast Steel Plant - New York Area Has Potential 20,000,000 Customers |
Knight, Harold A. |
Development Of The Modern Zinc Retort In The United States |
Page, H. R. - Lee, A. E., Jr. |
The Effect Of Strain-Temperature History On The Flow And Fracture Characteristics Of An Annealed Steel |
Ripling, E. J. – Sachs, G. |
Relation Between Chromium And Carbon In Chromium Steel Refining |
Hilty, D. C. |
The Densification Of Copper Powder Compacts In Hydrogen And In Vacuum |
Jordan, Charles B. – Duwez, Pol |
Influence Of Composition On The Stress-Corrosion Cracking Of Some Copper-Base Alloys |
Thompson, D. H. – Tracey, A. W. |
Cadmium Recovery Practice In Lead Smelting |
Feddersen, P. C. – Lee, Harold E. |
Development Of Muffle Furnaces For The Production Of Zinc Oxide And Zinc At East Chicago, Indiana |
Johnson, Gunnard E. |
The Effect Of Orientation Difference On Grain Boundary Energies |
Dunn, C. G. - Lionetti, F. |
Solubility Relationships Of The Refractory Monocarbides |
Norton, John T. – Mowry, A. L. |
Pressure Distribution In Compacting Metal Powders |
Duwez, Pol – Zwell, Leo |
Preferred Orientation In Rolled And Recrystallized Beryllium |
Smigelskas, A. – Barrett, C. S. |
Magnesium-Lithium Base Alloys - Preparation, Fabrication And General Characteristics |
Jackson, J. H. - Host, P. D. - Loonam, A. C. – Eastwood, L W. - Lorig, C. H. |
Self-Diffusion In Sintering Of Metallic Particles |
Kuczynski, G. C. |
Homogeneous Yielding Of Carburized And Nitride Single Iron Crystals |
Holden, A. N. - Hollomon, J. H. |
The Surface Tension Of Solid Copper |
Udin, H. – Shaler, A. J. – Wulff, John |
The Ionic Nature Of Metallurgical Slags. Simple Oxide Systems |
Chipman, John – Chang, Lo-Ching |
Properties Of Chromium Boride And Sintered Chromium Boride |
Sindeband, S. J. |
A Simple Constant Stress Strip Test |
Fisher, J. C. – Carreker, R. P. |
Grain Coarsening In Copper |
Beck, Paul A. – Towers, John, Jr. – Sperry, Philip R. |
Solid Nuclei In Liquid Metals |
Smith, Cyril Stanley |
Secondary Metals Increase in Importance - U. S. Tends Towards “Have-Not” in Primary Metals |
St. John, A. E. |
1948 Annual Review |
|
Mineral Economics |
Pehrson, Elmer W. |
Mining Geology |
Davidson, Donald M. |
Metal Mining |
Gardner, E. D. |
Minerals Beneficiation |
Myers, J. F. - Crabtree, E. H. - Zimmerly, S. R. |
Magnetite Mining And Milling |
Linney, J. R. |
Health And Safety |
Boardman, John L. |
Mineral Industry Education |
Wilson, Curtis L. |
Copper Industry |
Leckie, J. G. |
Zinc Industry |
Young, R. A. |
Lead Metallurgy |
Isbell, W. T. |
Aluminum Metallurgy |
Zeigler, Paul P. |
Magnesium Industry |
Hanawalt, J. D. |
Industrial Minerals |
Josephson, G. W. |
Ferroalloy Metals |
Knickerbocker, R. G. |
Physical Metallurgy |
Fullman, R. L. – Turnbull, D. |
Iron And Steel Production |
Carroll, Walter |
The Coal Industry |
Ball, Clayton G. |
The Petroleum Industry |
Alcorn, I. W. |
The Recovery Of Cadmium From Cadmium-Copper Precipitate, Electrolytic Zinc Co. Of Australasia, Risdon, Tasmania |
Anderson, G. H. |
Electrolytic Zinc At Risdon, Tasmania. Major Changes Since 1936 |
Ross, S. W. |
The Hardenability Effect Of Molybdenum |
Hodge, J. M. - Glove, J. L. - Storm, R. G. |
A Method Of Examination Of Sections Of Fine Metal Powder Particles With The Electron Microscope |
Delisle, Laurence |
The Effect Of Ferrite Grain Size On Notch Toughness |
Hodge, J. M. – Manning, R. D. - Reichhold, H. M. |
Recrystallization And Microstructure Of Aluminum Killed Deep Drawing Steel |
Rickett, R. L. – Kalin, S. H. - MacKenzie, J. T., Jr. |
Precipitation Phenomena In The Solid Solutions Of Nitrogen And Carbon In Alpha Iron Below The Eutectoid Temperature |
Dijkstra, L. J. |
Effect Of Recrystallization Texture On Grain Growth |
Beck, Paul A. – Sperry, Philip R. |
Nitrogen And Hydrogen In Metals |
|
Concentration Of The SO2 Content Of Dwight-Lloyd Sintering Machine Gas By Recirculation |
Reid, W. S. |
The Crystal Structure Of Ni4W |
Epremian, E. – Horker, D. |
Sulphur Equilibria Between Iron Blast Furnace Slags And Metal |
Hatch, Gerald G. – Chipman, John |
The Beryllium-Iron System |
Teitel, R. J. - Cohen, Morris |
Metal Trace Elements In Agriculture |
Gilbert, Frank A. |
Blast Furnace Conference Report |
Neustaetter, Kurt |
Discussion, Institute Of Metals Division, 1948 Fall Meeting |
|
The Effect Of High Copper Content On The Operation Of A Lead Blast Furnace, And Treatment Of The Copper And Lead Produced |
Collins, A. A. |
1949 Open Hearth Conference |
Carroll, Walter |
What Is Metallurgy? |
Chipman, John |
The Sigma Phase In Ternary Cr-Co-Fe And Cr-Co-Ni Alloys |
Beck, Paul A. – Manly, W. D. |
Distillation Of Zinc From Copper Base Alloys And Galvanizers Drosses |
Poland, Frank F. |
Cadmium Recovery Practice At The Donora Zinc Works |
Smith, G. T. – Moyer, R. C. |
The Statistical Nature Of The Endurance Limit |
Ransom, J. T. – Mehl, R. F. |
Investigation Of Temper Brittleness In Low-Alloy Steels |
Herres, S. A. – Elsea, A. R. |
Oriented Arrangements Of Thin Aluminum Films On Ionic Substrates |
Rhodin, T. N., Jr. |
P-Type And N-Type Silicon And The Formation Of The Photovoltaic Barrier In Silicon Ingots |
Scaff, J. H. - Theuerer, H. C. – Schumacher, E. E. |
Microstructures Of Silicon Ingots |
Pfann, W. G. – Scaff, J. H. |
Zirconium Metal, As Of 1949 |
Jaffee, R. I. |
Iron Ore Beneficiation |
Tartaron, Francis X. |
Controlled Drying Of Retorts |
Furlong, R. R. – Wertz, D. H. |
The Study Of Grain Boundaries With The Electron Microscope |
Radavich, J. F. |
Transformation Of Gamma To Alpha Manganese |
Potter, E. V. – Lukens, H. C. - Huber, R. W. |
Liquid Solubility Of Manganese In A Magnesium-Aluminum-Tin Alloy |
Nelson, B. J. – Sager, G. F. |
The Comparative Creep Properties Of Several Types Of Commercial Coppers |
Schwope, A. D. – Smith, K. F. – Jackson, L. R. |
The Rapid Determination Of Orientations Of Cubic Crystals |
Dunn, C. G. – Martin, W. W. |
The Vapor Pressures Of Zinc And Cadmium Over Some Of Their Silver Alloys |
Birchenall, C. E. – Cheng, C. H. |
Sintering Characteristics Of Minus Sixty-Five And Twenty Mesh Magnetite |
Stanley, Alan – Mead, Joseph C. |
Sulphur in Basic Iron and Steel |
Warren, H. E., Jr. |
Equilibrium In The Reaction Of Hydrogen With Oxygen In Liquid Iron |
Dastur, Minu N. – Chipman, John |
The Use Of Oxygen Enriched Air In The Metallurgical Operations Of Cominco At Trail, B. C. |
McNaughton, R. R. - Weldon, T. H. - Hargrave, J. H. – Whiton, L. V. |
A Thermodynamic Investigation Of The System Silver - Silver Sulphide |
Rosenqvist, Terkel |
Autogenous Roasting Of Low Grade Zinc Concentrate In Multiple Hearth Furnaces At Risdon, Tasmania |
Forster, J. A. B. |
El Paso Slag Treatment Plant |
Woodside, T. J. |
Electrical Resistivity Measurements On Iron-Silicon Compacts Prepared By The Powder Metallurgy Procedure |
Glaser, Frank W. |
A Metallographic Description Of Fracture In Impact Specimens Of A Structural Steel |
Baeyertz, M. - Craig, W. F., Jr. – Bumps, E. S. |
Recovery And Recrystallization In Brass |
Averbach, B. L. |
Ferromagnetic Alloys In The Systems Cu-Mn-In And Cu-Mn-Ga |
Hames, F. A. – Eppelsheimer, D. S. |
Secondary Recrystallization In Copper |
Kronberg, M. L. – Wilson, F. H. |
Kinetics Of The Reactions Of Zirconium With 02,N2 And H2 |
Gulbransen, Earl A. – Andrew, Kenneth F. |
The Active Slip Systems In The Simple Axial Extension Of Single Crystalline Alpha Brass |
Maddin, Robert - Mathewson, C. H. - Hibbard, W. R., Jr. |
The Effects Of Molybdenum And Commercial Ranges Of Phosphorus On The Toughness Of 0.40 Pct Carbon Chromium Steels |
Baeyertz, M. - Craig, W. F., Jr. – Sheehan, J. P. |
The Effect Of Quenching On The Age Hardening Of Two Aluminum Alloys |
Borer, R. D. – Baver, M. B. |
Effect Of Carbon And Nitrogen On Temper Brittleness |
Buffum, D. C. - Jaffe, L. D. – Clancy, W. P. |
Discontinuous Crack Propagation |
Jaffe, L. D. - Reed, E. L. – Mann, H. C. |
Low-Pressure Distillation of Zinc from Al-Zn Alloy |
Spendlove, Max J. - St. Clair, Hillary W. |
Determination of Boundary Stresses during the Compression of Cylindrical Powder Compacts |
Shank, M. E. – Wulff, John |
A Dilatometric Study of the Sintering of Metal Powder Compacts |
Duwez, Pol - Marten, Howard |
The Isolation of Carbides From High Speed Steel |
Blickwede, D. J. – Cohen, Morris |
Solubility of Titanium in Liquid Magnesium |
Aust, K. T. – Pidgeon, L. M. |
The Lattice Parameters of High Purity Alpha Titanium; and the Effects of Oxygen and Nitrogen on Them |
Clark, Howard T., Jr. |
The Mechanism of Martensite Formation |
Greninger, Alden B. – Troiano, Alexander R. |
Structure and Nature of Kink Bands in Zinc |
Hess, J. B. – Barrett, C. S. |
Analysis of Interstitial Diffusion Using Activity Methods |
Guy, A. G. |
The Transformations in ?-CuAI Alloys |
Klier, E. P. – Grymko, S. M. |
Surface Orientation and Rolling of Magnesium Sheet |
Dietrich, Robert L. |
Recrystallization Texture and Coarsening Texture in High Purity Aluminum |
Beck, Paul A. – Hu, Hsun |
Annealing Twins in Copper and 70-30 Alpha Brass |
Hibbard, Walter R., Jr. – Liu, You-Chao – Reiter, Stanley F. |
The Yielding and Strain-aging of Carburized and Nitrided Single Crystals of Iron |
Schwartzbart, Harry - Low, John R., Jr. |
The Effect of Oxygen, Nitrogen, Hydrogen on Iodide Refined Titanium |
Jaffee, Robert I. – Campbell, I. E. |
The Origin of Annealing Twins in Brass |
Maddin, Robert - Mathewson, C. H. - Hibbard, Walter R. Jr. |
Rectangular Hysteresis Loops of Co-Ni-Fe Alloys |
Chegwidden, R. A. |
Effect of Composition on the Wire Textures of Copper and Its Solid Solution Alloys |
Hibbard, Walter R., Jr. |
Compression Textures of Copper and Its Binary Alpha Solid Solution Alloys |
Hibbard, Walter R., Jr. – Trout, Delmar E., II |
Some Observations on the Rate of Secondary Recrystallization in High Purity Copper |
Turkalo, Anna M. – Turnbull, David |
Optical Temperature Scale and Emissivity of Liquid Iron |
Dastur, Minu N. – Gokcen, Nev. A. |
Size Effects, Quenching High-Purity Precipitation-hardenable Alloys |
Finlay, Walter L. |
The Ternary System, Copper-manganese-zinc |
Graham, T. R. - Long, J. R. - Armantrout, C. E. – Roberson, A. H. |
Discontinuous Crack Propagation - Further Studies |
Jaffe, L. D. – Reed, E. L. – Mann, H. C. |
The Free Energy Changes Accompanying the Martensite Transformation in Steels |
Fisher, J. C. |
Kinetics of the Austenite ? Martensite Transformation |
Fisher, J. C. – Hollomon, J. H. – Turnbull, D. |
Simultaneous Aging and Deformation in Metals |
Lubhan, J. D. |
The Transverse Bending of Single Crystals of Aluminum |
Yen, M. K. - Hibbard, W. R., Jr. |
Stages in the Deformation of Monel Metal as Shown by Polarized Light |
Woodard, D. H. |
Influence of Temperature on the Stress-strain-energy Relationship for Copper and Nickel-copper Alloy |
McAdam, D. J., Jr. |
Kinetics of the Reactions of Titanium with O2, and N2 and H2 |
Gulbransen, Earl A. – Andrew, Kenneth F. |
Structure of Diborides of Titanium, Zirconium, Columbium, Tantalum and Vanadium |
Norton, John T. – Blumenthal, H. – Sindeband, S. J. |
The Diffusion and Solubility of Carbon in Alpha Iron |
Stanley, James K. |
Studies of Interface Energies in Some Aluminum and Copper Alloys |
Ikeuye, K. K. - Smith, Cyril Stanley |
Preparation and Casting of Beryllium Melts |
Kura, J. G. - Jackson, J. H. - Udy, M. C. – Eastwood, L. W. |
Metallographic Examination of Beryllium Alloys |
Udy, M. C. – Manning, G. K. – Eastwood, L. W. |
Some Observations in the Structure of Alpha Brass Single Crystals after Cutting and Polishing |
Maddin, Robert – Hibbard, Walter R., Jr. |
On the Problem of Grain Boundary Movement |
Dunn, C. G. – Daniels, F. W. – Bolton, M. J. |
High-Temperature Scaling of Cobalt |
Johns, Charley R. – Baldwin, William Marsh, Jr. |
Thermodynamical Treatment of Very Small Solid Solubilities |
Guttman, Lester |
How to Conserve Manganese |
Vignos, J. C. |
The Bessemer Converter Process |
Wilder, A. B. |
Solid-Phase Bonding of Aluminum Alloys to Steel |
Cooke, V. W. - Levy, A. |
Materials Handling in the Foundry |
Lemmon, F. O. |
Titanium Investigations: Research and Development Work on the Preparation of Titanium Chloride and Oxide from Titanium Mattes |
Knickerbocker, R. G. - Gorski, C. H. - Kenworthy, H. - Starliper, A. G. |
Recovery of Zinc by the Dithionate Sulphur-Dioxide Leaching Process |
Ravitz, S. F. – Back, A. E. |
Seminar on the Kinetics of Sintering - With Discussion |
Shaler, A. J. |
Relative Deoxidizing Powers of Some Deoxidizers for Steel - With Discussion |
Sims, C. E. - Saller, H. A. – Boulger, F. W. |
Discussion – Iron and Steel Division San Francisco Meeting, February 1949 |
|
Discussion - Extractive Metallurgy Division - San Francisco Meeting, February 1949 |
|
Discussion - Institute of Metals Division - San Francisco Meeting, February 1949 |
|
Evaluation of pH Measurements with Regard to the Basicity of Metallurgical Slag |
Sherman, Charles W. – Grant, N. J. |
The Relation Between Indentation Hardness and Strain for Metals |
Palm, J. H. |
Optimelt Automatic Recalibrating Control - for arc-furnace regulators |
Bayle, R. M. |
Bessemer Converter Process |
Wilder, A. B. |
Can Leaching Aid the Copper Mines? |
Keyes, Harmon E. |
Melting Points in the System TiO2-CaO-MgO-A1203 |
Sigurdson, H. – Cole, S. S. |
Laboratory Smelting of Titaniferous Ores |
Armant, D. L. – Cole, S. S. |
Petrology of High-Titanium Slags |
Moore, Charles H., Jr. – Sigurdson, H. |
Effect of Prestraining Temperatures on the Recovery of Cold Worked Aluminum |
Tietz, T. E. – Anderson, R. A. – Dorn, J. E. |
Flow and Fracture Characteristics of a Die Steel at High Hardness Levels |
Klingler, L. J. – Chow, C. C. – Sachs, G. |
The Fume and Dust Problem in Industry |
Welch, Harry V. |
Some Observations on the Recovery of Cold-Worked Aluminum |
Cherian, T. V. – Pietrokowsky, P. – Dorn, J. E. |
Carbides in Isothermally Transformed Chromium Steels |
Crafts, Walter – Lamont, John L. |
The Properties of Sand Cast Magnesium-Rare Earth Alloys |
Leontis, Thomas E. |
The Relationship Between Electrical Conductivity and Composition of Molten Lead Silicate Slags |
Schellinger, A. Kenneth – Olsen, Robert P. |
Cemented Titanium Carbide |
Redmond, John C. – Smith, E. N. |
Intergranular Parting of Brass During Anneals |
Wilson, F. H. – Palmer, E. W. |
The Low Temperature Properties of Tin-antimony and Tin-cadmium Alloys |
Dunkerley, F. J. - Hunter, H. B. – Stone, F. G. |
Notes on the Electrolytic Isolation of Carbides in Steel |
Wranglen, Gustof |
The Effect of Working and Heating Eutectic Structures |
Brown, J. S. – Guy, A. G. |
Binary Chart for Interconversions Mol, Weight and Volume Percent |
Seabrook, John B. |
A Proposed Microbending Mechanism of Plastic Deformation |
Yen, M. K. |